DataSheetWiki


MAX3440EESA fiches techniques PDF

Maxim Integrated - 15kV ESD-Protected / 60V Fault-Protected / 10Mbps / Fail-Safe RS-485/J1708 Transceivers

Numéro de référence MAX3440EESA
Description 15kV ESD-Protected / 60V Fault-Protected / 10Mbps / Fail-Safe RS-485/J1708 Transceivers
Fabricant Maxim Integrated 
Logo Maxim Integrated 





1 Page

No Preview Available !





MAX3440EESA fiche technique
MAX3440E–MAX3444E
±15kV ESD-Protected, ±60V Fault-Protected,
10Mbps, Fail-Safe RS-485/J1708 Transceivers
General Description
The MAX3440E–MAX3444E fault-protected RS-485 and
J1708 transceivers feature ±60V protection from signal
faults on communication bus lines. Each device contains
one differential line driver with three-state output and one
differential line receiver with three-state input. The 1/4-unit-
load receiver input impedance allows up to 128 transceiv-
ers on a single bus. The devices operate from a 5V supply
at data rates of up to 10Mbps. True fail-safe inputs guar-
antee a logic-high receiver output when the receiver inputs
are open, shorted, or connected to an idle data line.
Hot-swap circuitry eliminates false transitions on the data
bus during circuit initialization or connection to a live
backplane. Short-circuit current-limiting and thermal shut-
down circuitry protect the driver against excessive power
dissipation, and on-chip ±15kV ESD protection eliminates
costly external protection devices.
The MAX3440E–MAX3444E are available in 8-pin SO
and PDIP packages and are specified over industrial and
automotive temperature ranges.
Applications
● RS-422/RS-485 Communications
● Industrial Networks
● Telecommunications Systems
● HVAC Controls
Features
● ±15kV ESD Protection
● ±60V Fault Protection
● Guaranteed 10Mbps Data Rate
(MAX3441E/MAX3443E)
● Hot Swappable for Telecom Applications
● True Fail-Safe Receiver Inputs
● Enhanced Slew-Rate-Limiting Facilitates
Error-Free Data Transmission
(MAX3440E/MAX3442E/MAX3444E)
● Allow Up to 128 Transceivers on the Bus
● -7V to +12V Common-Mode Input Range
● Automotive Temperature Range (-40°C to +125°C)
● Industry-Standard Pinout
Ordering Information
PART
TEMP RANGE
PIN-PACKAGE
MAX3440EESA+
-40°C to +85°C 8 SO
MAX3440EEPA+
-40°C to +85°C 8 PDIP
MAX3440EASA+
-40°C to +125°C 8 SO
MAX3440EAPA+
-40°C to +125°C 8 PDIP
+Denotes a lead(Pb)-free/RoHS-compliant package.
Ordering Information continued at end of data sheet.
Selector Guide
PART
TYPE
MAX3440E
MAX3441E
MAX3442E
MAX3443E
MAX3444E
RS-485
RS-485
RS-485
RS-485
J1708
DATA RATE
(Mbps)
0.25
2.5 to 10
0.25
2.5 to 10
0.25
LOW-POWER
SHUTDOWN
No
No
Yes
Yes
Yes
RECEIVER/DRIVER
ENABLE
Yes
Yes
Yes
Yes
Yes
TRANSCEIVERS
ON BUS
128
128
128
128
128
HOT SWAP
Yes
Yes
Yes
Yes
Yes (only RE)
Pin Configurations and Typical Operating Circuits
TOP VIEW
+
FAULT 1
RO 2
R
DE/RE 3
DI 4
D
+
8 VCC FAULT 1
7B
RO 2
R
6 A DE/RE 3
5 GND DI 4
D
8 VCC
7B
Rt
6
A
5 GND
MAX3440E
MAX3441E
DIP/SO
DIP/SO
Pin Configurations and Typical Operating Circuits continued at end of data sheet.
B
Rt
A
DE/RE
D DI
R
FAULT
RO
19-2666; Rev 3; 4/14

PagesPages 19
Télécharger [ MAX3440EESA ]


Fiche technique recommandé

No Description détaillée Fabricant
MAX3440EESA 15kV ESD-Protected / 60V Fault-Protected / 10Mbps / Fail-Safe RS-485/J1708 Transceivers Maxim Integrated
Maxim Integrated

US18650VTC5A

Lithium-Ion Battery

Sony
Sony
TSPC106

PCI Bus Bridge Memory Controller

ATMEL
ATMEL
TP9380

NPN SILICON RF POWER TRANSISTOR

Advanced Semiconductor
Advanced Semiconductor


www.DataSheetWiki.com    |   2020   |   Contactez-nous  |   Recherche