DataSheetWiki


DF7-2426SCF fiches techniques PDF

Hirose - 3.96 mm Pitch Miniature Connectors for Internal Power Supplies (UL /C-UL and TUV Listed)

Numéro de référence DF7-2426SCF
Description 3.96 mm Pitch Miniature Connectors for Internal Power Supplies (UL /C-UL and TUV Listed)
Fabricant Hirose 
Logo Hirose 





1 Page

No Preview Available !





DF7-2426SCF fiche technique
3.96 mm Pitch Miniature Connectors for Internal Power Supplies (UL,C-UL and TÜV Listed)
DF7 Series
Complete
Locking
Function
Prevention of
Incorrect Connections
Completely
enclosed
locking system
Full barrier
between adjacent
contacts.
sFeatures
1. Complete Locking Function
Reliable interior lock protects mated connectors from
accidental disconnection.
2. Increased Contact Retention of Crimped
Contacts and Prevention of Incomplete
Insertion
Separate contact retainer increases the contact
retention, assures and visually confirms the complete
contact insertion.
3. Molded-in Contact Retention Tabs
Handling of terminated contacts during the assembly and
termination is easier and avoids entangling of wires,
since there are no protruding metal tabs.
4. Incorrect Insertion Prevention
Connectors are polarized to assure correct mating with
corresponding parts.
5.Solder Crack Prevention
Glass reinforced resin is used in the pin header bodies to
prevent solder cracks caused by the heat shrinkage.
6. Prevention of Incorrect Board Placement
Built-in locating posts assure correct connector
placement and orientation on the board.(2-12 pos.)
7. Supports Sealing after Installation.
Sealing compound can be applied to the board installed
connector for distance of 6 mm max. from the mounting
surface (9 mm max. for single position).
8.Cost Effective Tooling
The same crimping tools are used to terminate socket
and pin contacts.
9. Prevention of Short Circuits between
Adjacent Contacts
Each contact is completely surrounded by the insulator
housing, electrically isolating it from adjacent contacts.
Guide post
Board Eyelet mounting
One pos. type can also be mounted
to boards that have eyelets.
Continued.
2004.7
1

PagesPages 16
Télécharger [ DF7-2426SCF ]


Fiche technique recommandé

No Description détaillée Fabricant
DF7-2426SC 3.96 mm Pitch Miniature Connectors for Internal Power Supplies (UL /C-UL and TUV Listed) Hirose
Hirose
DF7-2426SCF 3.96 mm Pitch Miniature Connectors for Internal Power Supplies (UL /C-UL and TUV Listed) Hirose
Hirose

US18650VTC5A

Lithium-Ion Battery

Sony
Sony
TSPC106

PCI Bus Bridge Memory Controller

ATMEL
ATMEL
TP9380

NPN SILICON RF POWER TRANSISTOR

Advanced Semiconductor
Advanced Semiconductor


www.DataSheetWiki.com    |   2020   |   Contactez-nous  |   Recherche