DataSheetWiki


SA54A fiches techniques PDF

Microsemi Corporation - 5.0 thru 170 volts 500 Watts Transient Voltage Suppressors

Numéro de référence SA54A
Description 5.0 thru 170 volts 500 Watts Transient Voltage Suppressors
Fabricant Microsemi Corporation 
Logo Microsemi Corporation 





1 Page

No Preview Available !





SA54A fiche technique
8700 E. Thomas Road
Scottsdale, AZ 85252
Phone: (480) 941-6300
Fax: (480) 947-1503
FEATURES:
ECONOMICAL SERIES
AVAILABLE IN BOTH UNIDIRECTIONAL AND BI-DIRECTIONAL CONSTRUCTION
5.0 TO 170 STAND-OFF VOLTAGE AVAILABLE
500 WATTS PEAK PULSE POWER DISSIPATION
QUICK RESPONSE
DESCRIPTION:
This Transient Voltage Suppressor is an economical, molded, commercial product
used to protect voltage sensitive components from destruction or partial degradation.
The response time of their clamping action is virtually instantaneous (1 x 10-12
seconds) and they have a peak pulse power rating of 500 watts for 1 ms as depicted in
Figure 1 and 2. Microsemi also offers a great variety of other Transient Voltage
Suppressor's to meet higher and lower power demands and special applications.
MAXIMUM RATINGS:
Peak Pulse Power Dissipation at 25°C: 500 Watts
Steady State Power Dissipation: 2.5 Watts at TL = +75°C
3/8" Lead Length
tclamping (0 volts to BV Min.):
Unidirectional <1x10-12 Seconds: Bi-directional <5x10-9 Seconds.
Operating and Storage Temperature: -55° to +175°C
TYPICAL CHARACTERISTIC CURVES
100
75
Peak Power
(Single pulse)
50
Continuous
Average Power
Lead Length = 3/8"
25
0 50 100 150 175
TL LEAD TEMPERATURE °C
FIGURE 1
DERATING CURVE
Peak Value Ipp
100
50
Pulse Time Duration
(tp) is Defined as that
point where Ip decays
to 50% of
I surge
12
34
TIME (t) IN MILLISECONDS
FIGURE 2
PULSE WAVEFORM FOR
EXPONENTIAL SURGE
SA5.0
thru
SA170A
5.0 thru 170 volts
500 Watts
Transient Voltage
Suppressors
DO-41
2 x .032 ± .002
[.81 ± .05]
.107
[2.72]
max.
2 X1.10
[27.94]
MIN.
.205
[5.21]
MAX.
POLARITY
Mark {cathode}
NOTE: DIMENSIONS IN [ ] =MILLIMETERS
MECHANICAL
CHARACTERISTICS
CASE: Void free transfer
molded thermosetting
plastic.
FINISH: Readily solderable.
POLARITY: Band denotes
cathode. Bi-directional not
marked.
WEIGHT: 0.7 gram (Appx.).
MOUNTING POSITION: Any
MSC1400.PDF 03-20-00

PagesPages 5
Télécharger [ SA54A ]


Fiche technique recommandé

No Description détaillée Fabricant
SA54 5.0 thru 170 volts 500 Watts Transient Voltage Suppressors Microsemi Corporation
Microsemi Corporation
SA54 500W TRANSIENT VOLTAGE SUPPRESSORS Won-Top Electronics
Won-Top Electronics
SA54 TRANSZORB TRANSIENT VOLTAGE SUPPRESSOR General Semiconductor
General Semiconductor
SA54 GLASS PASSIVATED JUNCTION TRANSIENT VOLTAGE SUPPRESSOR(VOLTAGE - 5.0 TO 170 Volts 500 Watt Peak Pulse Power) Pan Jit International Inc.
Pan Jit International Inc.

US18650VTC5A

Lithium-Ion Battery

Sony
Sony
TSPC106

PCI Bus Bridge Memory Controller

ATMEL
ATMEL
TP9380

NPN SILICON RF POWER TRANSISTOR

Advanced Semiconductor
Advanced Semiconductor


www.DataSheetWiki.com    |   2020   |   Contactez-nous  |   Recherche