|
|
Número de pieza | SA5223 | |
Descripción | Wide dynamic range AGC transimpedance amplifier 150MHz | |
Fabricantes | Philips | |
Logotipo | ||
Hay una vista previa y un enlace de descarga de SA5223 (archivo pdf) en la parte inferior de esta página. Total 12 Páginas | ||
No Preview Available ! INTEGRATED CIRCUITS
SA5223
Wide dynamic range AGC
transimpedance amplifier (150MHz)
Product specification
IC19 Data Handbook
1995 Oct 24
Philips
Semiconductors
1 page Philips Semiconductors
Wide dynamic range AGC transimpedance amplifier(150MHz)
Product specification
SA5223
GND
1
8 VCC
G1 2
IN 3
NC NC
NC
7 OUT
6 OUTB
PAD CENTER LOCATIONS
X(mm) Y(mm)
GND1
IN
GND2
OUT
OUTB
VCC
-0.400
-0.400
+0.400
+0.400
+0.400
+0.400
-0.053
-0.223
-0.342
-0.046
+0.154
+0.380
DIE SIZE
X(mm) Y(mm)
1.08 1.32
GND
4
5 G2
Figure 1. SA5223 Bonding Diagram
SD00507
Die Sales Disclaimer
Due to the limitations in testing high frequency and other parameters
at the die level, and the fact that die electrical characteristics may
shift after packaging, die electrical parameters are not specified and
die are not guaranteed to meet electrical characteristics (including
temperature range) as noted in this data sheet which is intended
only to specify electrical characteristics for a packaged device.
All die are 100% functional with various parametrics tested at the
wafer level, at room temperature only (25°C), and are guaranteed to
be 100% functional as a result of electrical testing to the point of
wafer sawing only. Although the most modern processes are
utilized for wafer sawing and die pick and place into waffle pack
carriers, it is impossible to guarantee 100% functionality through this
process. There is no post waffle pack testing performed on
individual die.
Since Philips Semiconductors has no control of third party
procedures in the handling or packaging of die, Philips
Semiconductors assumes no liability for device functionality or
performance of the die or systems on any die sales.
Although Philips Semiconductors typically realizes a yield of 85%
after assembling die into their respective packages, with care
customers should achieve a similar yield. However, for the reasons
stated above, Philips Semiconductors cannot guarantee this or any
other yield on any die sales.
1995 Oct 24
5
5 Page Philips Semiconductors
Wide dynamic range AGC transimpedance amplifier (150MHz)
Product specification
SA5223
SO8: plastic small outline package; 8 leads; body width 3.9mm
SOT96-1
1995 Oct 24
11
11 Page |
Páginas | Total 12 Páginas | |
PDF Descargar | [ Datasheet SA5223.PDF ] |
Número de pieza | Descripción | Fabricantes |
SA5222 | Low-power FDDI transimpedance amplifier | Philips |
SA5223 | Wide dynamic range AGC transimpedance amplifier 150MHz | Philips |
SA5224 | FDDI fiber optic postamplifier | Philips |
SA5225 | Fiber optic postamplifier | Philips |
Número de pieza | Descripción | Fabricantes |
SLA6805M | High Voltage 3 phase Motor Driver IC. |
Sanken |
SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
Analog Devices |
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |