DataSheetWiki


OPB762T fiches techniques PDF

ETC - Photologic Reflective Object Sensors

Numéro de référence OPB762T
Description Photologic Reflective Object Sensors
Fabricant ETC 
Logo ETC 





1 Page

No Preview Available !





OPB762T fiche technique
Product Bulletin OPB760T
June 1996
Photologic® Reflective Object Sensors
Types OPB760T, OPB761T, OPB762T, OPB763T
Features
Choice of mounting configurations
Choice of output configurations
Description
The OPB760T series of reflective
assemblies feature Photologic®
output. This electrical output can be
specified as either TTL Totem Pole or
TTL Open Collector. Either may be
supplied with inverter or buffer output
polarity. All have the added stability of a
built-in hysteresis amplifier.
Mounting Options
OPB760N series PC board mount,
without mounting tabs
OPB760T series PC board mount, with
two mounting tabs
OPB770N series wire leads with
connector, without mounting tabs
OPB770T series wire leads with
connector, with two mounting tabs
Absolute Maximum Ratings (TA = 25o C unless otherwise noted)
Supply Voltage, VCC (Not to exceed 3 sec.) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 V
Storage Temperature Range. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -40o C to +85o C
Operating Temperature Range . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -40o C to +70o C
Lead Soldering Temperature [1/16 inch (1.6 mm) from case for 5 sec. with soldering
iron] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 240o C(1)
Input Diode Power Dissipation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100 mW(2)
Output Photologic® Power Dissipation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 200 mW(3)
Total Device Power Dissipation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 300 mW(4)
Voltage at Output Lead (Open Collector Output) . . . . . . . . . . . . . . . . . . . . . . . . . . 35 V
Diode Forward D.C. Current. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40 mA
Diode Reverse D.C. Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 V
Notes:
(1) RMA flux is recommended. Duration can be extended to 10 sec. max. when flow soldering.
(2) Derate linearly 2.22 mW/o C above 25o C.
(3) Derate linearly 4.44 mW/o C above 25o C.
(4) Derate linearly 6.66 mW/o C above 25o C.
(5) The OPB760T thru OPB763T series are terminated with .020" square leads designed for
printed circuit board mounting.
(6) Normal application would be with light source blocked, simulated by IF = 0mA.
(7) Tested at d = 0.080" from a 90% diffuse white test surface.
(8) Tested at d = 0.080", 0.150" and 0.220" from a 90% diffuse white test surface. Reference:
Eastman Kodak, Catalog #1257795.
(9) Tested at d = 0.080", 0.150" and 0.220" from a 5% diffuse black test surface.
(10) All parameters tested using pulse technique.
Optek Technology, Inc. 1215 W. Crosby Road Carrollton, Texas 75006 (972) 323-2200
Fax (972) 323-2396
11-54

PagesPages 4
Télécharger [ OPB762T ]


Fiche technique recommandé

No Description détaillée Fabricant
OPB762 Photologic Reflective Object Sensor TT electronics
TT electronics
OPB762N Photologic Reflective Object Sensor TT electronics
TT electronics
OPB762N Photologic Reflective Object Sensors OPTEK Technologies
OPTEK Technologies
OPB762T Photologic Reflective Object Sensor TT electronics
TT electronics

US18650VTC5A

Lithium-Ion Battery

Sony
Sony
TSPC106

PCI Bus Bridge Memory Controller

ATMEL
ATMEL
TP9380

NPN SILICON RF POWER TRANSISTOR

Advanced Semiconductor
Advanced Semiconductor


www.DataSheetWiki.com    |   2020   |   Contactez-nous  |   Recherche