DataSheetWiki


OPB370 fiches techniques PDF

ETC - Slotted Op ti cal Switches

Numéro de référence OPB370
Description Slotted Op ti cal Switches
Fabricant ETC 
Logo ETC 





1 Page

No Preview Available !





OPB370 fiche technique
Product Bulletin OPB360
August 1996
Slotted Optical Switches
Types OPB360, OPB370 Series
Package N
Package L
Package P
Package T
Features
0.125" (3.18 mm) wide gap
Choice of aperture
Choice of opaque or IR transmissive
shell material
Choice of mounting configuration
Choice of lead spacing
Description
The OPB360/370 series of slotted
switches provides the design engineer
with the flexibility of a custom device
from a standard product line. Building
from a standard housing with a .125"
(3.18 mm) wide slot, the user can specify
(1) electrical output parameters, (2)
mounting tab configuration, (3) choice of
lead spacing, (4) discrete shell material,
and (5) aperture width.
All housings are an opaque grade of
injection-molded plastic to minimize the
assembly's sensitivity to ambient
radiation, both visible and near-infrared.
Discrete shells (exposed on the parallel
faces inside the device throat) are either
IR transmissive plastic for applications
where aperture contamination may occur
or opaque plastic with aperture openings
for maximum protection against ambient
light.
Absolute Maximum Ratings (TA = 25o C unless otherwise noted)
Storage and Operating Temperature Range . . . . . . . . . . . . . . . . . . . . . . . . -40o C to +85o C
Lead Soldering Temperature Range [1/16 inch (1.6 mm) from case for 5 sec. with
soldering iron] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 240o C(2)
Input Diode
Forward DC Current . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50 mA
Peak Forward Current (1 µs pulse width, 300 pps) . . . . . . . . . . . . . . . . . . . . . . . 3.0 A
Reverse DC Voltage. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2.0 V
Power Dissipation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100 mW(1)
Output Phototransistor
Collector-Emitter Voltage. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30 V
Emitter-Collector Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.0 V
Collector DC Current . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30 mA
Power Dissipation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100 mW(1)
Notes:
(1) Derate linearly 1.67 mW/o C above 25o C.
(2) RMA flux is recommended. Duration can be extended to 10 sec. max. when flow soldering.
(3) All parameters tested using pulse technique.
(4) Lead spacing of 0.220" (5.59 mm) or 0.320" (8.13 mm) is available. Leads are 0.20" sq. (5.08
mm) and 0.425" (10.80 mm) long (min).
(5) Methanol and isopropanol are recommended as cleaning agents. Plastic housings are
soluble in chlorinated hydrocarbons and ketones.
(6) Polarity is denoted by color of housing top:
LED - Gray or Clear
Sensor - Black
Replaces/Upgrades
OPB860, OPB870 Series
Optek Technology, Inc.
1215 W. Crosby Road
Carrollton, Texas 75006
12-8
(972) 323-2200
Fax (972) 323-2396

PagesPages 4
Télécharger [ OPB370 ]


Fiche technique recommandé

No Description détaillée Fabricant
OPB370 Slotted Op ti cal Switches ETC
ETC
OPB37x (OPBxxx) Slotted Optical Switches Optek Technology
Optek Technology

US18650VTC5A

Lithium-Ion Battery

Sony
Sony
TSPC106

PCI Bus Bridge Memory Controller

ATMEL
ATMEL
TP9380

NPN SILICON RF POWER TRANSISTOR

Advanced Semiconductor
Advanced Semiconductor


www.DataSheetWiki.com    |   2020   |   Contactez-nous  |   Recherche