DataSheetWiki


OPA632 fiches techniques PDF

Burr-Brown - Low Power / Single-Supply OPERATIONAL AMPLIFIERS TM

Numéro de référence OPA632
Description Low Power / Single-Supply OPERATIONAL AMPLIFIERS TM
Fabricant Burr-Brown 
Logo Burr-Brown 





1 Page

No Preview Available !





OPA632 fiche technique
® OPA631
OPA631
OPA632
For most current data sheet and other product
information, visit www.burr-brown.com
TM Low Power, Single-Supply
OPERATIONAL AMPLIFIERS
FEATURES
q HIGH BANDWIDTH: 75MHz (G = +2)
q LOW SUPPLY CURRENT: 6mA
q ZERO POWER DISABLE (OPA632)
q +3V AND +5V OPERATION
q INPUT RANGE INCLUDES GROUND
q 4.8V OUTPUT SWING ON +5V SUPPLY
q HIGH SLEW RATE: 100V/µs
q LOW INPUT VOLTAGE NOISE: 6nV/HZ
q AVAILABLE IN SOT23 PACKAGE
APPLICATIONS
q SINGLE SUPPLY ADC INPUT BUFFER
q SINGLE SUPPLY VIDEO LINE DRIVER
q CCD IMAGING CHANNELS
q LOW POWER ULTRASOUND
q PLL INTEGRATORS
q PORTABLE CONSUMER ELECTRONICS
+3V
2.26k
Disable
+3V
374
VIN
562
DIS
OPA632
Pwrdn
100
750
22pF
ADS901
10-Bit
20Msps
DESCRIPTION
The OPA631 and OPA632 are low power, high-speed,
voltage-feedback amplifiers designed to operate on a
single +3V or +5V supply. Operation on ±5V or +10V
supplies is also supported. The input range extends
below ground and to within 1V of the positive supply.
Using complementary common-emitter outputs pro-
vides an output swing to within 30mV of ground and
130mV of the positive supply. The high output drive
current and low differential gain and phase errors also
make them ideal for single-supply consumer video
products.
Low distortion operation is ensured by the high gain
bandwidth (68MHz) and slew rate (100V/µs), making
the OPA631 and OPA632 ideal input buffer stages to
3V and 5V CMOS converters. Unlike other low power,
single-supply amplifiers, distortion performance im-
proves as the signal swing is decreased. A low 6nV
input voltage noise supports wide dynamic range op-
eration. Channel multiplexing or system power reduc-
tion can be achieved using the high speed disable line.
Power dissipation can be reduced to zero by taking the
disable line High.
The OPA631 and OPA632 are available in an industry-
standard SO-8 package. The OPA631 is also available
in an ultra-small SOT23-5 package, while the OPA632
is available in the SOT23-6. Where higher full-power
bandwidth and lower distortion are required in a single-
supply operational amplifier, consider the OPA634
and OPA635.
RELATED PRODUCTS
Medium Speed, No Disable
With Disable
High Speed, No Disable
With Disable
SINGLES
OPA631
OPA632
OPA634
OPA635
DUALS
OPA2631
OPA2634
International Airport Industrial Park • Mailing Address: PO Box 11400, Tucson, AZ 85734 • Street Address: 6730 S. Tucson Blvd., Tucson, AZ 85706 • Tel: (520) 746-1111
Twx: 910-952-1111 • Internet: http://www.burr-brown.com/ • Cable: BBRCORP • Telex: 066-6491 • FAX: (520) 889-1510 • Immediate Product Info: (800) 548-6132
© 1999 Burr-Brown Corporation
PDS-1377A
Printed in U.S.A. June, 1999

PagesPages 17
Télécharger [ OPA632 ]


Fiche technique recommandé

No Description détaillée Fabricant
OPA631 SpeedPlus Low-Power Single-Supply Operational Amplifiers (Rev. A) Texas Instruments
Texas Instruments
OPA631 Low Power / Single-Supply OPERATIONAL AMPLIFIERS TM Burr-Brown
Burr-Brown
OPA632 SpeedPlus Low-Power Single-Supply Operational Amplifiers (Rev. A) Texas Instruments
Texas Instruments
OPA632 Low Power / Single-Supply OPERATIONAL AMPLIFIERS TM Burr-Brown
Burr-Brown

US18650VTC5A

Lithium-Ion Battery

Sony
Sony
TSPC106

PCI Bus Bridge Memory Controller

ATMEL
ATMEL
TP9380

NPN SILICON RF POWER TRANSISTOR

Advanced Semiconductor
Advanced Semiconductor


www.DataSheetWiki.com    |   2020   |   Contactez-nous  |   Recherche