|
|
PDF OPA2132 Data sheet ( Hoja de datos )
| Número de pieza | OPA2132 | |
| Descripción | High-Speed FET-INPUT OPERATIONAL AMPLIFIERS | |
| Fabricantes | Burr-Brown | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de OPA2132 (archivo pdf) en la parte inferior de esta página. Total 13 Páginas | ||
|
No Preview Available !
OPA132
OPA2132
OPA4132
OPA132
OPA2132
OPA4132
OPA132
OPA2132
OPA4132
SBOS054A – JANUARY 1995 – REVISED JUNE 2004
High-Speed
FET-INPUT OPERATIONAL AMPLIFIERS
FEATURES
q FET INPUT: IB = 50pA max
q WIDE BANDWIDTH: 8MHz
q HIGH SLEW RATE: 20V/µs
q LOW NOISE: 8nV/√Hz (1kHz)
q LOW DISTORTION: 0.00008%
q HIGH OPEN-LOOP GAIN: 130dB (600Ω load)
q WIDE SUPPLY RANGE: ±2.5 to ±18V
q LOW OFFSET VOLTAGE: 500µV max
q SINGLE, DUAL, AND QUAD VERSIONS
DESCRIPTION
The OPA132 series of FET-input op amps provides high-
speed and excellent dc performance. The combination of
high slew rate and wide bandwidth provide fast settling time.
Single, dual, and quad versions have identical specifications
for maximum design flexibility. High performance grades
are available in the single and dual versions. All are ideal for
general-purpose, audio, data acquisition and communica-
tions applications, especially where high source impedance
is encountered.
OPA132 op amps are easy to use and free from phase
inversion and overload problems often found in
common FET-input op amps. Input cascode circuitry pro-
vides excellent common-mode rejection and
maintains low input bias current over its wide input voltage
range. OPA132 series op amps are stable in unity gain and
provide excellent dynamic behavior over a wide range of
load conditions, including high load capacitance. Dual and
quad versions feature completely independent circuitry for
lowest crosstalk and freedom from interaction, even when
overdriven or overloaded.
Single and dual versions are available in 8-pin DIP and
SO-8 surface-mount packages. Quad is available in 14-pin
DIP and SO-14 surface-mount packages. All are specified
for –40°C to +85°C operation.
OPA132
Offset Trim 1
–In 2
+In 3
V– 4
8 Offset Trim
7 V+
6 Output
5 NC
8-Pin DIP, SO-8
OPA2132
Out A 1
–In A 2
+In A 3
V– 4
A
B
8 V+
7 Out B
6 –In B
5 +In B
8-Pin DIP, SO-8
Out A 1
–In A 2
+In A 3
V+ 4
+In B 5
–In B 6
Out B 7
OPA4132
AD
BC
14-Pin DIP
SO-14
14 Out D
13 –In D
12 +In D
11 V–
10 +In C
9 –In C
8 Out C
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
All trademarks are the property of their respective owners.
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of Texas Instruments
standard warranty. Production processing does not necessarily include
testing of all parameters.
www.ti.com
Copyright © 1995-2004, Texas Instruments Incorporated
1 page  
TYPICAL PERFORMANCE CURVES (Cont.)
At TA = +25°C, VS = ±15V, RL = 2kΩ, unless otherwise noted.
AOL, CMR, PSR vs TEMPERATURE
130
120 Open-Loop
Gain
110
PSR
100
CMR
90
–75 –50 –25
0
25 50 75
Ambient Temperature (°C)
100 125
QUIESCENT CURRENT AND SHORT-CIRCUIT CURRENT
vs TEMPERATURE
4.3 60
4.2 50
4.1
4.0 ±IQ
3.9
±ISC
40
30
20
3.8
–75 –50 –25 0 25 50 75
Ambient Temperature (°C)
10
100 125
OFFSET VOLTAGE
PRODUCTION DISTRIBUTION
12
Typical production
distribution of packaged
10 units. Single, dual and
quad units included.
8
6
4
2
0
Offset Voltage (µV)
0.01
0.001
TOTAL HARMONIC DISTORTION + NOISE
vs FREQUENCY
RL
2kΩ
600Ω
G = +10
0.0001
G = +1
0.00001
10
100
VO = 3.5Vrms
1k
Frequency (Hz)
10k
100k
OFFSET VOLTAGE DRIFT
PRODUCTION DISTRIBUTION
12
Typical production distribution
10 of packaged units. Single,
dual and quad units included.
8
6
4
2
0
Offset Voltage Drift (µV/°C)
MAXIMUM OUTPUT VOLTAGE
vs FREQUENCY
30
Maximum output voltage
VS = ±15V
without slew-rate
induced distortion
20
10
0
10k
VS = ±5V
VS = ±2.5V
100k
1M
Frequency (Hz)
10M
OPA132, 2132, 4132
SBOS054A
www.ti.com
5
5 Page 
11 Page | ||
| Páginas | Total 13 Páginas | |
| PDF Descargar | [ Datasheet OPA2132.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| OPA2130 | Low Power Precision FET-Input Operational Amplifiers (Rev. A) |  Texas Instruments |
| OPA2130PA | Low Power / Precision FET-INPUT OPERATIONAL AMPLIFIERS | Burr-Brown |
| OPA2130UA | Low Power / Precision FET-INPUT OPERATIONAL AMPLIFIERS | Burr-Brown |
| OPA2131 | General Purpose FET-Input Operational Amplifiers (Rev. A) | Texas Instruments |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |