DataSheetWiki


OP179 fiches techniques PDF

Analog Devices - Rail-to-Rail High Output Current Operational Amplifiers

Numéro de référence OP179
Description Rail-to-Rail High Output Current Operational Amplifiers
Fabricant Analog Devices 
Logo Analog Devices 





1 Page

No Preview Available !





OP179 fiche technique
a
Rail-to-Rail High Output
Current Operational Amplifiers
FEATURES
Rail-to-Rail Inputs and Outputs
High Output Current: ؎60 mA
Single Supply: 5 V to 12 V
Wide Bandwidth: 5 MHz
High Slew Rate: 3 V/s
Low Distortion: 0.01%
Unity-Gain Stable
No Phase Reversal
Short-Circuit Protected
Drives Capacitive Loads: 10 nF
APPLICATIONS
Multimedia
Telecom
DAA Transformer Driver
LCD Driver
Low Voltage Servo Control
Modems
FET Drivers
GENERAL DESCRIPTION
The OP179 and OP279 are rail-to-rail, high output current,
single-supply amplifiers. They are designed for low voltage
applications that require either current or capacitive load drive
capability. The OP179/OP279 can sink and source currents of
± 60 mA (typical) and are stable with capacitive loads to 10 nF.
Applications that benefit from the high output current of the
OP179/OP279 include driving headphones, displays, transform-
ers and power transistors. The powerful output is combined with a
unique input stage that maintains very low distortion with wide
common-mode range, even in single supply designs.
The OP179/OP279 can be used as a buffer to provide much
greater drive capability than can usually be provided by CMOS
outputs. CMOS ASICs and DAC often have outputs that can
swing to both the positive supply and ground, but cannot drive
more than a few milliamps.
Bandwidth is typically 5 MHz and the slew rate is 3 V/µs, making
these amplifiers well suited for single supply applications that
require audio bandwidths when used in high gain configurations.
Operation is guaranteed from voltages as low as 4.5 V, up to 12 V.
OP179/OP279
PIN CONFIGURATIONS
5-Lead SOT-23-5
(RT-5)
OP179
OUT A 1
5 V–
V+ 2
+IN A 3
4 ؊IN A
8-Lead SOIC
(S Suffix)
NC 1
؊IN A 2
+IN A 3
V؊ 4
OP179
8 NC
7 V+
6 OUT A
5 NC
NC = NO CONNECT
8-Lead SOIC and TSSOP
SO-8 (S) and RU-8
OUT A 1
؊IN A 2
+IN A 3
V؊ 4
OP279
8 V+
7 OUT B
6 ؊IN B
5 +IN B
Very good audio performance can be attained when using the
OP179/OP279 in 5 volt systems. THD is below 0.01% with a
600 load, and noise is a respectable 21 nV/Hz. Supply current
is less than 3.5 mA per amplifier.
The single OP179 is available in the 5-lead SOT-23-5 package.
It is specified over the industrial (–40°C to +85°C) tempera-
ture range.
The OP279 is available in 8-lead TSSOP and SO-8 surface
mount packages. They are specified over the industrial (–40°C
to +85°C) temperature range.
REV. G
Information furnished by Analog Devices is believed to be accurate and
reliable. However, no responsibility is assumed by Analog Devices for its
use, nor for any infringements of patents or other rights of third parties that
may result from its use. No license is granted by implication or otherwise
under any patent or patent rights of Analog Devices.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: 781/329-4700
www.analog.com
Fax: 781/326-8703
© Analog Devices, Inc., 2002

PagesPages 16
Télécharger [ OP179 ]


Fiche technique recommandé

No Description détaillée Fabricant
OP176 Bipolar/JFET / Audio Operational Amplifier Analog Devices
Analog Devices
OP177 Ultraprecision Operational Amplifier Analog Devices
Analog Devices
OP179 Rail-to-Rail High Output Current Operational Amplifiers Analog Devices
Analog Devices

US18650VTC5A

Lithium-Ion Battery

Sony
Sony
TSPC106

PCI Bus Bridge Memory Controller

ATMEL
ATMEL
TP9380

NPN SILICON RF POWER TRANSISTOR

Advanced Semiconductor
Advanced Semiconductor


www.DataSheetWiki.com    |   2020   |   Contactez-nous  |   Recherche