|
|
PDF NX-09T-CV Data sheet ( Hoja de datos )
| Número de pieza | NX-09T-CV | |
| Descripción | I/O Card Interface Connectors | |
| Fabricantes | Hirose Electric | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de NX-09T-CV (archivo pdf) en la parte inferior de esta página. Total 15 Páginas | ||
|
No Preview Available !
I/O Card Interface Connectors
NX Series
sFeatures
1. Low Profile
Protorusion above the PCB board is only 2.9mm, and the
connectors can be mounted to type I and II I/O cards.
2. EMI/RFI protection
Full metal shielding. Shield connects first, ahead of
contacts.
3. ESD Secure
Thermoplastic molded covers assures insulation
of the connections and shields from ESD.
4. Secure Latching
A built-in latch assures correct and secure
mating of connector.
5. Reliable Conductor Termination
Reliable termination of conductors is
accomplished by proven IDC termination.
6. Sequential Mating
The 0.8mm pitch contacts are engaging the
corresponding parts in sequence: Ground-
Power & Signal
7. Rugged Construction
Securely attached to the board with optional
screws.
8. Card Frame Kits
Available as a separate part number.
9. Secure Attachment to Frame Kit.
Compliant mounting bracket attaches the
connectore directly to the frame kit.
sApplications
Used with I/O cards, portable personal computers,and the external connections of various small-sized portable
terminals.
sSpecifications
Ratings
Current rating 0.5 A
Operating temperature
Operating humidity
Voltage rating 125 V AC
-30ç to +70ç (Note 1) Storage temperature range -10ç to +60ç (Note 2)
95% R.H. or less
(No condensation)
Storage humidity range 40 to 70% (Note 2)
Item
1. Insulation resistance
2. Withstanding voltage
3. Contact resistance
4. Vibration
Specification
250 M ohms min.
No flashover or insulation breakdown.
40 m ohms max.
No electrical discontinuity of 10µs or
more
100 V DC
300 V AC / 1 minute
100 mA
Conditions
Frequency: 10 to 55 Hz, single amplitude of 0.75 mm,
2 hours in each of the 3 directions.
5. Humidity (Steady state) Insulation resistance: 100 M ohms min. 96 hours at temperature of 60ç and humidity of 90% to 95%
6. Temperature cycle
No damage, cracks, or parts looseness.
-55ç, 30 min./15 to 30ç, within 5 min/85ç, 30 min
/15 to 35ç, within 5 min, for 5 cycles
7. Durability
(Insertion/withdrawal)
60 m ohms max.
3000 cycles
8. Resistance to
Soldering heat
No deformation of components affecting Reflow: At the recommended temperature profile
performance.
Manual soldering: 300ç for 3 seconds
Note 1: Includes temperature rise caused by current flow.
Note 2: The term "storage" refers to products stored for long period of time prior to mounting and use. Operating Temperature
Range and Humidity range covers non- conducting condition of installed connectors in storage, shipment or during
transportation.
B8
1 page  
sPlug units
NX30TA-15PAA
CL234-0005-8
sPlug Covers
NX-15T-CV
CL234-0006-0
Contact No.1
Part Number
NX30TA-09PAA
NX30TA-15PAA
NX30TA-25PAA
NX30TA-32PAA
CL No.
234-0002-0
234-0005-8
234-0008-6
234-0024-2
Unit: mm
Number of contacts A B
09 14.6 14.1
15 19.4 18.9
25 27.4 26.9
32 33.0 32.5
B12
Unit: mm
Part Number
CL No.
Number of contacts A B C D E F G Outer diameter of cable
NX-09T-CV
234-0003-2
09 18.2 21.2 14.0 26 06.0 5.5 6.5 less than Ø 5.5
NX-15T-CV
234-0006-0
15 23.0 26.0 18.8 28 07.0 6.0 7.0 less than Ø 6.0
NX-15T-CV1
234-0017-7
15 23.0 26.0 18.8 28 05.0 4.0 5.0 less than Ø 4.0
NX-25T-CV
234-0009-9
25 31.0 34.0 26.8 30 08.0 6.5 7.5 less than Ø 6.5
NX-25TA-CV1
234-0039-0
25 31.0 34.0 26.8 32 13.0 4.0 5.0 less than Ø 6.5(Note)
NX-32TA-CV1
234-0025-5
32 36.6 40.6 32.4 32 16.2 4.2 5.0 less than Ø 7.5(Note)
Note: Designed for flat cable use. when round cable is used, clamp portion shall be made flat, adjusting exclusive use bushing.
5 Page 
Back Connectors for Type II I/O Cards
sNX Series 68
sFeatures
1. Low profile
Receptacle connectors have a mounting height of 3.5
mm and can be mounted to type II I/O cards.
2. Shielded construction
A metal shell is used for shielding.
3. ESD protection
The use of an over-mold cover offers excellent ESD
protection.
sSpecifications
4. More efficient wiring work
Wiring on the plug side uses AWG #30 pressure welding
(discrete type) for more efficient wiring work.
sApplications
I/O card interfaces.
Item
1. Current rating
Specification
0.5A
Conditions
----------
BApplicable
2. Voltage rating
125 V AC
----------
I/O Cable
3. Insulation resistance 250 M ohms min. 100 V DC
Conductor size
AWG #30 (7/0.1)
4. Withstanding voltage 300 V AC
No flashover or insulation
breakdown.
Insulator outer diameter
Cable style
0.5mm
UL20276
5. Contact resistance 40 m ohms min. 100 mA
6. Durability (Insertion/withdrawal) 3000 cycles Contact resistance : 60 m ohms max.
sMaterials
Item
Material
Finish
Remarks
Insulator
Synthetic resin
Color : Black
UL94V-0
Receptacle
Contacts
Copper alloy
Selective gold plating
----------
Body
Stainless steel
Solder plating
----------
Plug unit
Insulator
Contacts
Synthetic resin
Copper alloy
Color : Black
Selective gold plating
UL94V-0
----------
Plug cover
Cover
Body
Synthetic resin
Stainless steel
Color : Black
----------
UL94V-0
----------
Frame
Synthetic resin
Color : Black
UL94V-0
FG terminal
Phosphor bronze
Gold plating
----------
Frame kit
Spring pin
Stainless steel
----------
----------
Coil spring
Stainless steel
----------
----------
Panel
sOrdering Information
qReceptacle
NX 60 H - 68 S 9 - SP
1 23
qPlug unit
4 56
NX 30 H - 68 P
7
1 23
qPlug cover
45
NX - 68 H - CV
1
43
8
qFrame kit
NX - 68 H - KT 9 (05)
Stainless steel With thermal adhesive tape
----------
1 Series name:NX
2 Wiring style 30: Loose lead pressure welding type (for fine wire)
60: SMT type
3 Serial type for form
4 Number of contacts: 68
5 Type of opening S: Receptacle
P: Plug
6 Coplanarity: 0.9 (Dimension from connector center to board mounting position)
7 Variations SP: Spring pin (for cards)
8 Type of accessories CV: Vertical opening cover
KT: Frame kit
9 Panel finish (05): Dull processing
1
43
86 9
B18
11 Page | ||
| Páginas | Total 15 Páginas | |
| PDF Descargar | [ Datasheet NX-09T-CV.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| NX-09T-CV | I/O Card Interface Connectors | Hirose Electric |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |