DataSheetWiki


NCV8501 fiches techniques PDF

ON - Micropower 150 mA LDO Linear Regulators with ENABLE / DELAY / RESET / and Monitor FLAG

Numéro de référence NCV8501
Description Micropower 150 mA LDO Linear Regulators with ENABLE / DELAY / RESET / and Monitor FLAG
Fabricant ON 
Logo ON 





1 Page

No Preview Available !





NCV8501 fiche technique
NCV8501 Series
Micropower 150 mA LDO
Linear Regulators
with ENABLE, DELAY,
RESET, and Monitor FLAG
The NCV8501 is a family of precision micropower voltage
regulators. Their output current capability is 150 mA. The family has
output voltage options for adjustable, 2.5 V, 3.3 V, 5.0 V, 8.0 V, and 10 V.
The output voltage is accurate within ±2.0% with a maximum
dropout voltage of 0.6 V at 150 mA. Low quiescent current is a feature
drawing only 90 mA with a 100 mA load. This part is ideal for any and
all battery operated microprocessor equipment.
Microprocessor control logic includes an active RESET (with
DELAY), and a FLAG monitor which can be used to provide an early
warning signal to the microprocessor of a potential impending RESET
signal. The use of the FLAG monitor allows the microprocessor to
finish any signal processing before the RESET shuts the
microprocessor down.
The active RESET circuit operates correctly at an output voltage as
low as 1.0 V. The RESET function is activated during the power up
sequence or during normal operation if the output voltage drops
outside the regulation limits.
The regulator is protected against reverse battery, short circuit, and
thermal overload conditions. The device can withstand load dump
transients making it suitable for use in automotive environments. The
device has also been optimized for EMC conditions.
Features
Output Voltage Options: Adjustable, 2.5 V, 3.3 V, 5.0 V, 8.0 V, 10 V
±2.0% Output
Low 90 mA Quiescent Current
Fixed or Adjustable Output Voltage
Active RESET
ENABLE
150 mA Output Current Capability
Fault Protection
+60 V Peak Transient Voltage
−15 V Reverse Voltage
Short Circuit
Thermal Overload
Early Warning through FLAG/MON Leads
NCV Prefix for Automotive and Other Applications Requiring Site
and Change Control
Pb−Free Packages are Available
http://onsemi.com
8
1
SO−8
D SUFFIX
CASE 751
16
1
SOIC 16 LEAD
WIDE BODY
EXPOSED PAD
PDW SUFFIX
CASE 751R
MARKING DIAGRAMS
SO−8
8
8501x
ALYW
1
SOW−16
E PAD
16
8501x
AWLYYWW
1
x = Voltage Ratings as Indicated Below:
A = Adjustable
2 = 2.5 V
3 = 3.3 V
5 = 5.0 V
8 = 8.0 V
1 = 10 V
A = Assembly Location
WL, L = Wafer Lot
YY, Y = Year
WW, W = Work Week
ORDERING INFORMATION
See detailed ordering and shipping information in the package
dimensions section on page 13 of this data sheet.
© Semiconductor Components Industries, LLC, 2004
September, 2004 − Rev. 19
1
Publication Order Number:
NCV8501/D

PagesPages 16
Télécharger [ NCV8501 ]


Fiche technique recommandé

No Description détaillée Fabricant
NCV8501 Micropower 150 mA LDO Linear Regulators with ENABLE / DELAY / RESET / and Monitor FLAG ON
ON
NCV8502 Micropower 150 mA LDO Linear Regulators ON
ON
NCV8503 Micropower 400 mA LDO Linear Regulators ON Semiconductor
ON Semiconductor
NCV8504 Micropower 400 mA LDO Linear Regulators ON Semiconductor
ON Semiconductor

US18650VTC5A

Lithium-Ion Battery

Sony
Sony
TSPC106

PCI Bus Bridge Memory Controller

ATMEL
ATMEL
TP9380

NPN SILICON RF POWER TRANSISTOR

Advanced Semiconductor
Advanced Semiconductor


www.DataSheetWiki.com    |   2020   |   Contactez-nous  |   Recherche