DataSheetWiki


NCV4279 fiches techniques PDF

ON - 5.0 V Micropower 150 mA LDO Linear Regulator with DELAY / Adjustable RESET / and Monitor FLAG

Numéro de référence NCV4279
Description 5.0 V Micropower 150 mA LDO Linear Regulator with DELAY / Adjustable RESET / and Monitor FLAG
Fabricant ON 
Logo ON 





1 Page

No Preview Available !





NCV4279 fiche technique
NCV4279
5.0 V Micropower 150 mA
LDO Linear Regulator with
DELAY, Adjustable RESET,
and Sense Output
The NCV4279 is a 5.0 V precision micropower voltage regulator
with an output current capability of 150 mA.
The output voltage is accurate within ±2.0% with a maximum
dropout voltage of 0.5 V at 100 mA. Low quiescent current is a feature
drawing only 150 mA with a 1.0 mA load. This part is ideal for any and
all battery operated microprocessor equipment.
Microprocessor control logic includes an active reset output RO
with delay and a SI/SO monitor which can be used to provide an early
warning signal to the microprocessor of a potential impending reset
signal. The use of the SI/SO monitor allows the microprocessor to
finish any signal processing before the reset shuts the microprocessor
down.
The active Reset circuit operates correctly at an output voltage as
low as 1.0 V. The Reset function is activated during the power up
sequence or during normal operation if the output voltage drops
outside the regulation limits.
The reset threshold voltage can be decreased by the connection of an
external resistor divider to the RADJ lead. The regulator is protected
against reverse battery, short circuit, and thermal overlowawdw.DcaotaSnhdeeitt4iUo.conms.
The device can withstand load dump transients making it suitable for
use in automotive environments. The device has also been optimized
for EMC conditions.
If the application requires pullup resistors at the logic outputs Reset
and Sense Out, the NCV4269 with integrated resistors can be used.
Features
5.0 V ± 2.0% Output
Low 150 mA Quiescent Current
Active Reset Output Low Down to VQ = 1.0 V
Adjustable Reset Threshold
150 mA Output Current Capability
Fault Protection
+60 V Peak Transient Voltage
−40 V Reverse Voltage
Short Circuit
Thermal Overload
Early Warning through SI/SO Leads
Internally Fused Leads in SO−14 Package
Very Low Dropout Voltage
Electrical Parameters Guaranteed Over Entire Temperature Range
Pb−Free Packages are Available
NCV Prefix for Automotive and Other Applications Requiring Site
and Control Changes
http://onsemi.com
8
1
SO−8
D SUFFIX
CASE 751
MARKING
DIAGRAMS
8
4279
ALYW
G
1
14
1
SO−14
D SUFFIX
CASE 751A
14
NCV4279
AWLYWWG
1
A = Assembly Location
WL, L = Wafer Lot
YY, Y = Year
WW, W = Work Week
G, G = Lead Free Indicators
ORDERING INFORMATION
See detailed ordering and shipping information in the package
dimensions section on page 12 of this data sheet.
© Semiconductor Components Industries, LLC, 2005
December, 2005 − Rev. 3
1
Publication Order Number:
NCV4279/D

PagesPages 14
Télécharger [ NCV4279 ]


Fiche technique recommandé

No Description détaillée Fabricant
NCV4274 Voltage Regulator Family ON Semiconductor
ON Semiconductor
NCV4274A Voltage Regulator Family ON Semiconductor
ON Semiconductor
NCV4274C 400mA Low Dropout Voltage Regulator ON Semiconductor
ON Semiconductor
NCV4275 5.0 V Low-Drop Voltage Regulator ON Semiconductor
ON Semiconductor

US18650VTC5A

Lithium-Ion Battery

Sony
Sony
TSPC106

PCI Bus Bridge Memory Controller

ATMEL
ATMEL
TP9380

NPN SILICON RF POWER TRANSISTOR

Advanced Semiconductor
Advanced Semiconductor


www.DataSheetWiki.com    |   2020   |   Contactez-nous  |   Recherche