DataSheetWiki


150D186X9006B2 fiches techniques PDF

Vishay Siliconix - Solid-Electrolyte TANTALEX Capacitors Hermetically-Sealed/ Axial-Lead

Numéro de référence 150D186X9006B2
Description Solid-Electrolyte TANTALEX Capacitors Hermetically-Sealed/ Axial-Lead
Fabricant Vishay Siliconix 
Logo Vishay Siliconix 





1 Page

No Preview Available !





150D186X9006B2 fiche technique
150D
Vishay Sprague
Solid-Electrolyte TANTALEX® Capacitors
Hermetically-Sealed, Axial-Lead
PERFORMANCE CHARACTERISTICS
Operating Temperature: - 55°C to + 85°C. (To + 125°C
with voltage derating.)
Capacitance Tolerance: At 120 Hz, + 25°C. ± 20%,
± 10% standard. ± 5% available as special.
Dissipation Factor: At 120 Hz, + 25°C. Dissipation factor, as
determined from the expression 2πfRC, shall not exceed the
values listed in the Standard Ratings Tables.
DC Leakage Current (DCL Max.):
At + 25°C: Leakage current shall not exceed the values listed
in he Standard Ratings Tables.
FEATURES
• These high performance, hermetically-sealed TANTALEX®
capacitors have set the standard for solid-electrolyte
tantalum capacitors for more than three decades.
• High capacitance, low DCL, low dissipation factor and
exceptional operating stability.
• Performance and reliability have been proven in
commercial, industrial and military applications.
• Available in four case codes and capacitors and are
supplied with plastic-film insulation.
• Terminals are solid, tinned nickel wire leads.
• The Military equivalent to the 150D is the CSR13 which is
qualified to MIL-C-39003/01.
At + 85°C: Leakage current shall not exceed 10 times the
values listed in the Standard Ratings Tables.
At +125°C: Leakage shall not exceed 15 times the values
listed in the Standard Ratings Tables.
Life Test: Capacitors shall withstand rated DC
voltage applied at + 85°C for 2000 hours or derated DC
voltage applied at + 125°C for 1000 hours.
Following the life test:
1. DCL shall not exceed 125% of the initial requirement.
2. Dissipation Factor shall meet the initial requirement.
3. Change in capacitance shall not exceed ± 5%.
DIMENSIONS in inches [millimeters]
1.500 ± 0.250
[38.10 ± 6.35]
L
1.500 ± 0.250
[38.10 ± 6.35]
D
DIA.
SOLID TINNED
NICKEL LEADS
J
MAX.
0.047 [1.19] MAX.
0.125 [3.18] MAX.
CASE
CODE
WITH INSULATING SLEEVE*
DL
J (MAXIMUM)
A
0.135 ± 0.016
0.286 ± 0.031
0.422
[3.43 ± 0.41]
[7.26 ± 0.79]
[10.720]
B
0.185 ± 0.016
0.474 ± 0.031
0.610
[4.70 ± 0.41]
[12.04 ± 0.79]
[15.490]
R
0.289 ± 0.016
0.686 ± 0.031
0.822
[7.34 ± 0.41]
[17.42 ± 0.79]
[20.880]
S
0.351 ± 0.016
0.786 ± 0.031
0.922
[8.92 ± 0.41]
[19.96 ± 0.79]
[23.420]
*When a shrink-fitted insulation is used, it shall lap over the ends of the capacitor body.
www.vishay.com
10
For technical questions, contact [email protected]
LEAD SIZE
AWG
NO.
NOMINAL
DIAMETER
24 0.020
[0.51]
24 0.020
[0.51]
22 0.025
[0.64]
22 0.025
[0.64]
Document Number: 40015
Revision 11-Jun-03

PagesPages 9
Télécharger [ 150D186X9006B2 ]


Fiche technique recommandé

No Description détaillée Fabricant
150D186X9006B2 Solid-Electrolyte TANTALEX Capacitors Hermetically-Sealed/ Axial-Lead Vishay Siliconix
Vishay Siliconix
150D186X9006B2 Solid-Electrolyte TANTALEX Capacitors Hermetically-Sealed/ Axial-Lead Vishay Siliconix
Vishay Siliconix

US18650VTC5A

Lithium-Ion Battery

Sony
Sony
TSPC106

PCI Bus Bridge Memory Controller

ATMEL
ATMEL
TP9380

NPN SILICON RF POWER TRANSISTOR

Advanced Semiconductor
Advanced Semiconductor


www.DataSheetWiki.com    |   2020   |   Contactez-nous  |   Recherche