|
|
PDF N74F85N Data sheet ( Hoja de datos )
| Número de pieza | N74F85N | |
| Descripción | 4-bit magnitude comparator | |
| Fabricantes | Philips | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de N74F85N (archivo pdf) en la parte inferior de esta página. Total 10 Páginas | ||
|
No Preview Available !
INTEGRATED CIRCUITS
74F85
4-bit magnitude comparator
Product specification
IC15 Data Handbook
Philips Semiconductors
1994 Sep 27
1 page  
Philips Semiconductors
4-bit magnitude comparator
Product specification
74F85
ABSOLUTE MAXIMUM RATINGS
(Operation beyond the limits set forth in this table may impair the useful life of the device.
Unless otherwise noted these limits are over the operating free-air temperature range.)
SYMBOL
PARAMETER
VCC
VIN
IIN
VOUT
IOUT
Tamb
Tstg
Supply voltage
Input voltage
Input current
Voltage applied to output in High output state
Current applied to output in Low output state
Operating free-air temperature range
Storage temperature range
RATING
–0.5 to +7.0
–0.5 to +7.0
–30 to +5
–0.5 to VCC
40
0 to +70
–65 to +150
UNIT
V
V
mA
V
mA
°C
°C
RECOMMENDED OPERATING CONDITIONS
SYMBOL
PARAMETER
VCC
VIH
VIL
IIK
IOH
IOL
Tamb
Supply voltage
High-level input voltage
Low-level input voltage
Input clamp current
High-level output current
Low-level output current
Operating free-air temperature range
LIMITS
MIN
NOM
MAX
4.5 5.0 5.5
2.0
0.8
–18
–1
20
0 +70
UNIT
V
V
V
mA
mA
mA
°C
DC ELECTRICAL CHARACTERISTICS
(Over recommended operating free-air temperature range unless otherwise noted.)
SYMBOL
PARAMETER
TEST CONDITIONS1
LIMITS
MIN TYP2 MAX
UNIT
VOH High-level output voltage
VCC = MIN, VIL = MAX
VIH = MIN, IOH = MAX
±10%VCC
2.5
±5%VCC
2.7 3.4
V
VOL Low-level output voltage
VCC = MIN, VIL = MAX
VIH = MIN, IOL = MAX
±10%VCC
±5%VCC
0.30 0.50
0.30 0.50
V
VIK Input clamp voltage
VCC = MIN, II = IIK
–0.73 –1.2
V
II Input current at maximum input voltage VCC = 0.0V, VI = 7.0V
100 µA
IIH High-level input current
VCC = MAX, VI = 2.7V
20 µA
IIL Low-level input current
IOS Short-circuit output current3
VCC = MAX, VI = 0.5V
VCC = MAX
–20 µA
–60
–150
mA
ICCH
VIN = GND
36 50
ICC Supply current (total)
ICCL VCC = MAX
An = Bn = IA=B = GND,
IA>B= IA<B = 4.5V
mA
40 54
NOTES:
1. For conditions shown as MIN or MAX, use the appropriate value specified under recommended operating conditions for the applicable type.
2. All typical values are at VCC = 5V, Tamb = 25°C.
3. Not more than one output should be shorted at a time. For testing IOS, the use of high-speed test apparatus and/or sample-and-hold
techniques are preferable in order to minimize internal heating and more accurately reflect operational values. Otherwise, prolonged shorting
of a High output may raise the chip temperature well above normal and thereby cause invalid readings in other parameter tests. In any
sequence of parameter tests, IOS tests should be performed last.
September 27, 1994
5
5 Page | ||
| Páginas | Total 10 Páginas | |
| PDF Descargar | [ Datasheet N74F85N.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| N74F85D | 4-bit magnitude comparator | Philips |
| N74F85N | 4-bit magnitude comparator | Philips |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |