|
|
PDF N74F07N Data sheet ( Hoja de datos )
| Número de pieza | N74F07N | |
| Descripción | Inverter/buffer drivers | |
| Fabricantes | Philips | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de N74F07N (archivo pdf) en la parte inferior de esta página. Total 11 Páginas | ||
|
No Preview Available !
INTEGRATED CIRCUITS
74F07
Inverter/buffer drivers
Product data
Supersedes data of 1992 Jul 24
Philips
Semiconductors
2004 Mar 12
1 page  
Philips Semiconductors
Hex inverter/buffer drivers (open-collector)
Product data
74F07
DC ELECTRICAL CHARACTERISTICS
(Over recommended operating free-air temperature range unless otherwise noted.)
SYMBOL
PARAMETER
TEST CONDITIONS1
LIMITS
UNIT
MIN
TYP2
MAX
IOH High-level output current
VCC = MIN, VIL = MAX,
VOH = MAX, VIH = MIN
VOL Low-level output voltage
VCC = MIN,
VIL = MAX,
IOL = MAX ±10% VCC
VIH = MIN
±5% VCC
VIK Input clamp voltage
VCC = MIN, II = IIK
II
Input current at maximum input
VCC = MAX, VI = 7.0V
voltage
0.30
0.30
–0.73
250
0.50
0.50
–1.2
100
µA
V
V
V
µA
IIH High-level input current
VCC = MAX, VI = 2.7V
20 µA
IIL Low-level input current
VCC = MAX, VI = 0.5V
ICC Supply current (total)
ICCH VCC = MAX
–0.6 mA
10 14 mA
ICCL
32 45 mA
NOTES:
1. For conditions shown as MIN or MAX, use the appropriate value specified under recommended operating conditions for the applicable type.
2. All typical values are at VCC = 5V, Tamb = 25°C.
3. Not more than one output should be shorted at a time. For testing IOS, the use of high-speed test apparatus and/or sample-and-hold
techniques are preferable in order to minimize internal heating and more accurately reflect operational values. Otherwise, prolonged shorting
of a High output may raise the chip temperature well above normal and thereby cause invalid readings in other parameter tests. In any
sequence of parameter tests, IOS tests should be performed last.
AC ELECTRICAL CHARACTERISTICS
SYMBOL
PARAMETER
TEST CONDITION
tPLH Propagation delay
tPHL
An to Yn
Waveform 1
LIMITS
VCC = +5.0V
Tamb = +25°C
CL = 50pF, RL = 100Ω
Min Typ Max
VCC = +5.0V ± 10%
Tamb = 0°C to +70°C
CL = 50pF, RL = 100Ω
Min Max
2.0 4.0 6.0
3.0 5.0 7.0
2.0
2.5
6.5
7.5
UNIT
ns
2004 Mar 12
5
5 Page 
Philips Semiconductors
Hex inverter/buffer drivers (open-collector)
Product data
74F07
Data sheet status
Level
Data sheet status [1]
Product
status [2] [3]
I Objective data
Development
Definitions
This data sheet contains data from the objective specification for product development.
Philips Semiconductors reserves the right to change the specification in any manner without notice.
II Preliminary data
Qualification
This data sheet contains data from the preliminary specification. Supplementary data will be published
at a later date. Philips Semiconductors reserves the right to change the specification without notice, in
order to improve the design and supply the best possible product.
III Product data
Production
This data sheet contains data from the product specification. Philips Semiconductors reserves the
right to make changes at any time in order to improve the design, manufacturing and supply. Relevant
changes will be communicated via a Customer Product/Process Change Notification (CPCN).
[1] Please consult the most recently issued data sheet before initiating or completing a design.
[2] The product status of the device(s) described in this data sheet may have changed since this data sheet was published. The latest information is available on the Internet at URL
http://www.semiconductors.philips.com.
[3] For data sheets describing multiple type numbers, the highest-level product status determines the data sheet status.
Definitions
Short-form specification — The data in a short-form specification is extracted from a full data sheet with the same type number and title. For detailed information see
the relevant data sheet or data handbook.
Limiting values definition — Limiting values given are in accordance with the Absolute Maximum Rating System (IEC 60134). Stress above one or more of the limiting
values may cause permanent damage to the device. These are stress ratings only and operation of the device at these or at any other conditions above those given
in the Characteristics sections of the specification is not implied. Exposure to limiting values for extended periods may affect device reliability.
Application information — Applications that are described herein for any of these products are for illustrative purposes only. Philips Semiconductors make no
representation or warranty that such applications will be suitable for the specified use without further testing or modification.
Disclaimers
Life support — These products are not designed for use in life support appliances, devices, or systems where malfunction of these products can reasonably be
expected to result in personal injury. Philips Semiconductors customers using or selling these products for use in such applications do so at their own risk and agree
to fully indemnify Philips Semiconductors for any damages resulting from such application.
Right to make changes — Philips Semiconductors reserves the right to make changes in the products—including circuits, standard cells, and/or software—described
or contained herein in order to improve design and/or performance. When the product is in full production (status ‘Production’), relevant changes will be communicated
via a Customer Product/Process Change Notification (CPCN). Philips Semiconductors assumes no responsibility or liability for the use of any of these products, conveys
no license or title under any patent, copyright, or mask work right to these products, and makes no representations or warranties that these products are free from patent,
copyright, or mask work right infringement, unless otherwise specified.
Contact information
For additional information please visit
http://www.semiconductors.philips.com.
Fax: +31 40 27 24825
For sales offices addresses send e-mail to:
© Koninklijke Philips Electronics N.V. 2004
All rights reserved. Printed in U.S.A.
Document order number:
Date of release: 03-04
9397 750 13033
Philips
Semiconductors
2004 Mar 12
11
11 Page | ||
| Páginas | Total 11 Páginas | |
| PDF Descargar | [ Datasheet N74F07N.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| N74F07AD | Inverter/buffer drivers | Philips |
| N74F07D | Inverter/buffer drivers | Philips |
| N74F07D | Inverter/buffer drivers | Philips |
| N74F07N | Inverter/buffer drivers | Philips |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |