DataSheetWiki


NTE956 fiches techniques PDF

NTE Electronics - Integrated Circuit 3-Terminal Adjustable Positive Voltage Regulator

Numéro de référence NTE956
Description Integrated Circuit 3-Terminal Adjustable Positive Voltage Regulator
Fabricant NTE Electronics 
Logo NTE Electronics 





1 Page

No Preview Available !





NTE956 fiche technique
NTE956
Integrated Circuit
3–Terminal Adjustable Positive
Voltage Regulator
Description:
The NTE956 is an adjustable 3–terminal positive voltage regulator in a TO220 type package capable
of supplying in excess of 1.5A over a 1.2V to 37V output range. This device is exceptionally easy to
use and both line and load regulation are better than standard fixed regulators.
In addition to higher performance than fixed regulators, the NTE956 offers full overload protection
available only in IC’s. Included on the chip are current limit, thermal overload protection and safe area
protection. All overload protection circuitry remains fully functional even if the adjustment terminal
is disconnected.
Normally, no capacitors are needed unless the device is situated far from the input filter capacitors
in which case an input bypass is needed. An optional output capacitor can be added to improve tran-
sient response. The adjustment terminal can be bypassed to achieve very high ripple rejection ratios
which are difficult to achieve with standard 3–terminal regulators.
Besides replacing fixed regulators, the NTE956 is useful in a wide variety of other applications. Since
the regulator is “floating” and sees only the input–to–output differential voltage, supplies of several
hundred volts can be regulated as long as the maximum input to output differential is not exceeded.
Also, it makes an especially simple adjustable switching regulator, a programmable output regulator,
or by connecting a fixed resistor between the adjustment and output, the NTE956 can be used as a
precision current regulator. Supplies with electronic shutdown can be achieved by clamping the ad-
justment terminal to GND which programs the output to 1.2V where most loads draw little current.
Features:
D Adjustable Output Down to 1.2V
D Guaranteed 1.5A Output Current
D Line Regulation Typically 0.01%/V
D Load Regulation Typically 0.1%
D Current Limit Constant with Temperature
D 100% Electrical Burn–In
D Eliminates the Need to Stock Many Voltages
D 80dB Ripple Rejection
Absolute Maximum Ratings:
Power Dissipation, PD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Internally Limited
Input–Output Voltage Differential, VI–VO . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40V
Operating Junction Temperature Range, TJ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0° to +125°C
Storage Temperature Range, Tstg . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . –65° to +150°C
Typical Thermal Resistance, Junction–to–Case, RthJC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4°C/W
Lead Temperature (During Soldering, 10sec), TL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . +300°C

PagesPages 2
Télécharger [ NTE956 ]


Fiche technique recommandé

No Description détaillée Fabricant
NTE950 Integrated Circuit Positive 3 Terminal Voltage Regulator / 100mA NTE Electronics
NTE Electronics
NTE951 Integrated Circuit Positive 3 Terminal Voltage Regulator / 100mA NTE Electronics
NTE Electronics
NTE952 Integrated Circuit Precision 2.5V Shunt NTE Electronics
NTE Electronics
NTE953 Linear Integrated Circuit 4-Terminal Positive Adjustable Voltage Regulator NTE Electronics
NTE Electronics

US18650VTC5A

Lithium-Ion Battery

Sony
Sony
TSPC106

PCI Bus Bridge Memory Controller

ATMEL
ATMEL
TP9380

NPN SILICON RF POWER TRANSISTOR

Advanced Semiconductor
Advanced Semiconductor


www.DataSheetWiki.com    |   2020   |   Contactez-nous  |   Recherche