DataSheetWiki


NTE9370 fiches techniques PDF

NTE Electronics - Integrated Circuit HTL / Quad D-Type Flip-Flop

Numéro de référence NTE9370
Description Integrated Circuit HTL / Quad D-Type Flip-Flop
Fabricant NTE Electronics 
Logo NTE Electronics 





1 Page

No Preview Available !





NTE9370 fiche technique
NTE9370
Integrated Circuit
HTL, Quad D–Type Flip–Flop
Description:
Four D–type flip–flops utilizing a common clock line make up the NTE9370. Each flip–flop has compli-
mentary passive pull up outputs with a single D input. This circuit is ideal as a quad latch for temporary
storage of 4–bit binary numbers.
Data is transferred from D inputs to outputs when the clock line is low. With the clock line high, output
data is held and D inputs are ignored.
Absolute Maximum Ratings:
Supply Voltage:
Continuous . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16.5V
Pulsed (< 0.1sec) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18V
Input Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . –0.5V to 16.5V
Voltage Applied to Output . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . –0.5V to +16.5V
Continuous Sink Current (TA = +25°C):
Continuous . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15mA
Surge (< 1sec) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20mA
Output Short Circuit Duration to GND . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Continuous
Operating Temperature Range, Topr . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . –30° to +85°C
Storage Temperature Range, Tstg . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . –55° to +100°C
Lead Temperature (During Soldering, 1/16” from case, 10sec max), TL . . . . . . . . . . . . . . . . . +300°C
Electrical Characteristics: (VCC = 12V ±1V unless otherwise specified)
Parameter
Symbol
Test Conditions
Input Threshold Voltage, Low
Input Threshold Voltage, High
Input Current, Low (1 Unit Load)
VIL Guaranteed input low threshold for all inputs
VIH Guaranteed input high threshold for all inputs
IIL VCC = Max, VIN = VOL1 max
Input Leakage Current (1 Unit Load) IIH VCC = Max, VIN = VCC
Output Low Voltage
Output High Voltage
Test Supply Voltage
VOL
VOH
VCC
VCC = Min, VIL = 5V VIH = 6.5V,
IOL = F.O. x U.L.
Min Typ Max Unit
5––V
– – 6.5 V
– – 2.1 mA
– – 10 µA
– – 1.5 V
10 – – V
11 12 13 V
Note 1. F.O. is fanout in unit loads (U.L.). A unit load is defined by the above input specifications.

PagesPages 2
Télécharger [ NTE9370 ]


Fiche technique recommandé

No Description détaillée Fabricant
NTE937 Integrated Circuit JFET Input Operational Amplifier NTE Electronics
NTE Electronics
NTE9370 Integrated Circuit HTL / Quad D-Type Flip-Flop NTE Electronics
NTE Electronics
NTE937M Integrated Circuit JFET Input Operational Amplifier NTE Electronics
NTE Electronics

US18650VTC5A

Lithium-Ion Battery

Sony
Sony
TSPC106

PCI Bus Bridge Memory Controller

ATMEL
ATMEL
TP9380

NPN SILICON RF POWER TRANSISTOR

Advanced Semiconductor
Advanced Semiconductor


www.DataSheetWiki.com    |   2020   |   Contactez-nous  |   Recherche