DataSheetWiki


NTE924 fiches techniques PDF

NTE Electronics - Integrated Circuit Voltage Follower / Operational Amplifier

Numéro de référence NTE924
Description Integrated Circuit Voltage Follower / Operational Amplifier
Fabricant NTE Electronics 
Logo NTE Electronics 





1 Page

No Preview Available !





NTE924 fiche technique
NTE924 & NTE924M
Integrated Circuit
Voltage Follower, Operational Amplifier
Description:
The NTE924 and NTE924M are monolithic operational amplifiers internally connected as unity–gain
non–inverting amplifiers. These devices use super–gain transistors in the input stage to get low bias
current without sacrificing speed. Directly interchangeable with the NTE909 and NTE941 series in
voltage follower applications, these devices have internal frequency compensation and provision for
offset balancing.
Features:
D Available in 8–Lead DIP (NTE924M) and 8–Lead Metal Can (NTE924) Packages
D Input Current: 10nA Max Over Temperature
D Small Signal Bandwidth: 20MHz
D Slew Rate: 30V/µs
D Supply Voltage Range: ±5V to ±18V
Absolute Maximum Ratings:
Supply Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ±18V
Power Dissipation (Note 2), PD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 500mW
Input Voltage (Note 3) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ±15V
Output Short–Circuit Duration (Note 4) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Indefinite
Operating Temperature Range, Topr . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0° to +70°C
Storage Temperature Range, Tstg . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . –65° to +150°C
Lead Temperature (During Soldering, 10sec), TL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . +260°C
Note 1. The NTE924M is a discontinued device and no longer available.
Note 2. For operating at elevated temperatures, the NTE924 must be derated based on a thermal
resistance of +150°C/W, junction–to–ambient, or +45°C/W, junction–to–case. The thermal
resistance of the NTE924M is +100°C/W, junction–to–ambient.
Note 3. For supply voltages less than ±15V, the absolute maximum input voltage is equal to the supply
voltage.
Note 4. Continuous short–circuit is allowed for case temperatures to +70°C or +55°C ambient tem-
perature. It is necessary to insert a resistor greater than 2kin series with the input when
the amplifier is driven from low impedance sources to prevent damage when the output is
shorted. RS = 5k min, 14k typical is recommended for dynamic stability in all applications.

PagesPages 3
Télécharger [ NTE924 ]


Fiche technique recommandé

No Description détaillée Fabricant
NTE92 Silicon Complementary Transistors Hi-Fi Power Amp / Audio Ourtput NTE Electronics
NTE Electronics
NTE9200 4-Lead SIP / Frequency Divider NTE Electronics
NTE Electronics
NTE922 Integrated Circuit Voltage Comparator NTE Electronics
NTE Electronics
NTE922M Integrated Circuit Voltage Comparator NTE Electronics
NTE Electronics

US18650VTC5A

Lithium-Ion Battery

Sony
Sony
TSPC106

PCI Bus Bridge Memory Controller

ATMEL
ATMEL
TP9380

NPN SILICON RF POWER TRANSISTOR

Advanced Semiconductor
Advanced Semiconductor


www.DataSheetWiki.com    |   2020   |   Contactez-nous  |   Recherche