|
|
Número de pieza | NTE861 | |
Descripción | Integrated Circuit Quad / Normally Open / SPST JFET Analog Switch w/Disable | |
Fabricantes | NTE Electronics | |
Logotipo | ||
Hay una vista previa y un enlace de descarga de NTE861 (archivo pdf) en la parte inferior de esta página. Total 3 Páginas | ||
No Preview Available ! NTE861
Integrated Circuit
Quad, Normally Open, SPST JFET
Analog Switch w/Disable
Description:
The NTE861 is a monolithic combination of bipolar and JFET technology producing a one chip quad
JFET switch. A unique circuit technique is employed to maintain a constant resistance over the ana-
log voltage range of ±10V. The input is designed to operate from minimum TTL levels, and switch
operation also ensures a break–before–make action.
Features:
D Analog signals are not loaded
D Constant “ON” resistance for signals up to ±10V and 100kHz
D Pin compatible with CMOS switches with the advantage of blow out free handling
D Small signal analog signals to 50MHz
D Break–before–make action
D High open switch isolation at 1.0MHz
D Low leakage in “OFF” state
D TTL, DTL, RTL compatibility
D Single disable pin opens all switches in package
This device operates from a ±15V supply and swings a ±10V analog signal. The JFET switches are
designed for applications where a dc to medium frequency analog signal needs to be controlled.
Absolute Maximum Ratings:
Positive Supply–Negative Supply (VCC –VEE) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36V
Reference Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . VEE ≤ VR ≤ VCC
Logic Input Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . VR –4.0V ≤ VIN ≤ VR +6.0V
Analog Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . VEE ≤ VA ≤ VCC +6V; VA ≤ VEE +36V
Analog Current . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . IA < 20mA
Power Dissipation (Note 1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 500mW
Operating Temperature Range . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0° to 70°C
Storage Temperature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . –65° to 150°C
Typical Thermal Resistance, Junction–to–Ambient, RthJA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 85°C/W
Lead Temperature (Soldering, 10 seconds) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . +300°C
Note 1 For operating at high temperature this device must be derated based on a +100°C maximum
junction temperature and a thermal resistance of +150°C/W.
1 page |
Páginas | Total 3 Páginas | |
PDF Descargar | [ Datasheet NTE861.PDF ] |
Número de pieza | Descripción | Fabricantes |
NTE860 | Integrated Circuit Low-Power / Narrow-Band FM IF | NTE Electronics |
NTE861 | Integrated Circuit Quad / Normally Open / SPST JFET Analog Switch w/Disable | NTE Electronics |
NTE862 | Integrated Circuit Audio Power Amplifier | NTE |
NTE863 | Integrated Circuit OP Amp/Comparator | NTE Electronics |
Número de pieza | Descripción | Fabricantes |
SLA6805M | High Voltage 3 phase Motor Driver IC. |
Sanken |
SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
Analog Devices |
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |