DataSheet39.com

What is NTE2015?

This electronic component, produced by the manufacturer "NTE", performs the same function as "Integrated Circuit 7-Channel Darlington Array/Driver".


NTE2015 Datasheet PDF - NTE

Part Number NTE2015
Description Integrated Circuit 7-Channel Darlington Array/Driver
Manufacturers NTE 
Logo NTE Logo 


There is a preview and NTE2015 download ( pdf file ) link at the bottom of this page.





Total 3 Pages



Preview 1 page

No Preview Available ! NTE2015 datasheet, circuit

NTE2011/NTE2012/NTE2013/NTE2014/NTE2015
Integrated Circuit
7–Channel Darlington Array/Driver
Description:
The NTE2011 through NTE2015 are high–voltage, high–current Darlington arrays in a 16–Lead DIP
type package and are comprised of seven silicon NPN Darlington pairs on a common monolithic sub-
strate. All units have open–collector outputs and integral diodes for inductive load transient suppres-
sion.
Peak inrush currents to 600mA (NTE2011, NTE2013, NTE2014) or 750mA (NTE2012, NTE2015) are
permissible, making them ideal for driving tungstun filament lamps.
The NTE2011 is a general purpose array that may be used with standard bi–polar digital logic using
external current limiting, or with most PMOS or CMOS directly. This device is pinned with outputs
opposite inputs to facilitate printed wiring board layouts.
The NTE2012 is designed for use with 14V to 25V PMOS devices. Each input has a Zener diode and
resistor in series to limit the input current to a safe value in that application. The Zener diode also gives
this device excellent noise immunity.
The NTE2013 has a 2.7kseries base resistor for each Darlington pair, allowing operation directly
with TTL or CMOS operating at a supply voltage of 5V. This device will handle numerous interface
needs – particularly those beyond the capabilities of standard logic buffers.
The NTE2014 has a 10.5kseries input resistor that permits operation directly from CMOS or PMOS
outputs utilizing supply voltages of 6V to 15V. The required input current is below that of the NTE2013,
while the required input voltage is less than that required by the NTE2012.
The NTE2015 is designed for use with standard TTL and Schottky TTL, with which higher output cur-
rents are required and loading of the logic output is not a concern. This device will sink a minimum
of 350mA when driven from a “totem pole” logic output.
Absolute Maximum Ratings: (TA = +25°C for any one Darlington pair unless otherwise specified)
Output Voltage, VCE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50V
Input Voltage, VIN
NTE2012, NTE2013, NTE2014 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30V
NTE2015 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15V
Continuous Collector Current. IC
NTE2011, NTE2013, NTE2014 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 500mA
NTE2012, NTE2015 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 600mA
Continuous Input Current, IIN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25mA
Power Dissipation, PD
One Darlington Pair . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1W
Total Device (Note 1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2W
Operating Ambient Temperature Range, TA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . –20° to +85°C
Storage Temperature Range, Tstg . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . –55° to +150°C
Note 1. The NTE2015 is a discontinued device and no longer available.
Note 2. Derate at the rate of 16.6mW/°C above +25°C.
Note 3. Under normal operating conditions, these devices will sustain 350mA per output with
VCE(sat) = 1.6V at +70°C with a pulse width of 20ms and a duty cycle of 34%.


Part Details

On this page, you can learn information such as the schematic, equivalent, pinout, replacement, circuit, and manual for NTE2015 electronic component.


Information Total 3 Pages
Link URL [ Copy URL to Clipboard ]
Download [ NTE2015.PDF Datasheet ]

Share Link :

Electronic Components Distributor


An electronic components distributor is a company that sources, stocks, and sells electronic components to manufacturers, engineers, and hobbyists.


SparkFun Electronics Allied Electronics DigiKey Electronics Arrow Electronics
Mouser Electronics Adafruit Newark Chip One Stop


Featured Datasheets

Part NumberDescriptionMFRS
NTE2011The function is Integrated Circuit 7-Channel Darlington Array/Driver. NTENTE
NTE2012The function is Integrated Circuit 7-Channel Darlington Array/Driver. NTENTE
NTE2013The function is Integrated Circuit 7-Channel Darlington Array/Driver. NTENTE

Semiconductors commonly used in industry:

1N4148   |   BAW56   |   1N5400   |   NE555   |  

LM324   |   BC327   |   IRF840  |   2N3904   |  



Quick jump to:

NTE2     1N4     2N2     2SA     2SC     74H     BC     HCF     IRF     KA    

LA     LM     MC     NE     ST     STK     TDA     TL     UA    



Privacy Policy   |    Contact Us     |    New    |    Search