|
|
PDF NTE1901 Data sheet ( Hoja de datos )
| Número de pieza | NTE1901 | |
| Descripción | Integrated Circuit Negative Adjustable Voltage Regulator / -1.2V to -37V / 100mA | |
| Fabricantes | NTE | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de NTE1901 (archivo pdf) en la parte inferior de esta página. Total 3 Páginas | ||
|
No Preview Available !
NTE1901
Integrated Circuit
Negative Adjustable Voltage Regulator,
–1.2V to –37V, 100mA
Description:
The NTE1901 is an adjustable 3–terminal negative voltage regulator in a TO92 type package capable
of supplying 100mA over a –12,V to –37V output range. It is exceptionally easy to use and both line
and load regulation are better than standard fixed regulators.
In addition to higher performance than fixed regulators, the NTE1901 offers full overload protection.
Included on the chip are current limit, thermal overload protection and safe area protection. All over-
load protection circuitry remains fully functional even if the adjustment terminal is disconnected.
Normally, no capacitors are needed unless the device is situated more than 6 inches from the input
filter capacitor in which case an input bypass is needed. An optional output capacitor can be added
to improve transient response. The adjustment terminal can be bypassed to achieve very high ripple
rejection ratios which are difficult to achieve with standard 3–terminal regulators.
Besides replacing fixed regulators, the NTE1901 is useful in a wide variety of other applications.
Since the regulator is “floating” and sees only the input–to–output differential voltage, supplies of sev-
eral hundred volts can be regulated as long as the maximum input–to–output differential is not ex-
ceeded.
Also, it makes an especially simple adjustable switching regulator, a programmable output regulator,
or by connecting a fixed resistor between the adjustment and output, the NTE1901 can be used as
a precision current regulator. Supplies with electronic shutdown can be achieved by clamping the
adjustment terminal to ground which programs the output to 1.2V where most loads draw little current.
Features:
D Adjustable Output Down to 1.2V
D Guaranteed 100mA Output Current
D Line Regulation Typically 0.01%/V
D Load Regulation Typically 0.1%
D Current Limit Constant with Temperature
D Eliminates the Need to Stock Many Voltages
D Standard 3–Lead Transistor Package
D 80db Ripple Rejection
D Output is Short Circuit Protected
1 page | ||
| Páginas | Total 3 Páginas | |
| PDF Descargar | [ Datasheet NTE1901.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| NTE190 | Silicon NPN Transistor High Voltage Amplifier | NTE |
| NTE1900 | Integrated Circuit 3-Terminal Adjustable Positive Voltage Regulator | NTE |
| NTE1901 | Integrated Circuit Negative Adjustable Voltage Regulator / -1.2V to -37V / 100mA | NTE |
| NTE1902 | Integrated Circuit 3 Terminal Positive Voltage Regulator 9V / 100mA | NTE |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |