|
|
Número de pieza | NTE1764 | |
Descripción | Integrated Circuit Infrared Preamplifier | |
Fabricantes | NTE | |
Logotipo | ||
Hay una vista previa y un enlace de descarga de NTE1764 (archivo pdf) en la parte inferior de esta página. Total 2 Páginas | ||
No Preview Available ! NTE1764
Integrated Circuit
Infrared Preamplifier
Description:
The NTE1764 is an infrared preamplifier in a 14–Lead DIP type package and contains four main parts:
the gain–controlled amplifier I, the amplifier II, the pulse–separating amplifier III, and the inverter IV.
The amplifier I has a wide dynamic range and thus ensures interference free operation, also at bright
ambient light, 50Hz modulated light originating from fluorescent lamps, or at intensive infrared light,
e.g. produced by infrared sound transmission. It is also possible, to approach almost directly the re-
mote–control transmitter to the receiver without producing misfunction by overdriving the receiver.
The amplifier II further amplifies the signal, and amplifier III separates the pulse–shaped intelligence
signal from noise and other unwanted parts. The inverter IV provided additionally inverts the output
signal available at Pin7 as negative pulse, and thus delivers positive output pulses at Pin8. If an addi-
tional resistor is inserted between Pin6 and GND, the noise–immunity is increased, but the input sen-
sitivity decreased. Pin10 serves as test pin and must not be connected.
The capacitor connected from Pin2 to GND influences the automatic gain control of amplifier I con-
tained in the NTE1764. A capacitance of less than 1µF will cause misfunction in the distance range
of 0.2, to 2m.
Absolute Maximum Ratings: (Note 1)
Supply Voltage, V3 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6V
Ambient Operating Temperature Range, TA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . –20° to +65°C
Storage Temperature Range, TS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . –30° to +125°C
Recommended Operating Conditions: (Note 1)
Parameter
Symbol Min Typ Max Unit
Supply Voltage
V3 4.5 5.0 5.5 V
Electrical Characteristics: (V3 = 5V, TA = +25°C, Note 1)
Parameter
Symbol Min Typ Max Unit
Current Consumption
Gain Between Pin14 & Pin7
I2 – 1 2 mA
G 70 – – dB
Output Resistance Pin7 & Pin8, formed by the Pull–Up of an RO – 20 – kΩ
NPN Transistor
Output Low Voltage Pin7 & Pin8 at IOL = 1.6mA
IR Transmission Range using the SAA1250 IR Transmitter IC
and a Transmission Current Amplitude of 1.5A, and
One Transmitter Diode (NTE3017)
VOL
L1
– 0.4 0.8 V
– 12 – m
Two Transmitter Diodes (NTE3017)
L2 – 19 – m
Three Transmitter Diodes (NTE3017)
L3 – 20 – m
Note 1. All voltages are referred to GND (Pin1, Pin9, and Pin13).
1 page |
Páginas | Total 2 Páginas | |
PDF Descargar | [ Datasheet NTE1764.PDF ] |
Número de pieza | Descripción | Fabricantes |
NTE176 | Germaniun PNP Transistor Audio Power Amplifier | NTE |
NTE1761 | Integrated Circuit Infrared Remote Control Preamp | NTE |
NTE1762 | Integrated Circuit Infrared Remote Control Preamp | NTE |
NTE1764 | Integrated Circuit Infrared Preamplifier | NTE |
Número de pieza | Descripción | Fabricantes |
SLA6805M | High Voltage 3 phase Motor Driver IC. |
Sanken |
SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
Analog Devices |
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |