DataSheetWiki


NT68P62U fiches techniques PDF

ETC - 8-Bit Microcontroller for Monitor (32K OTP ROM Type)

Numéro de référence NT68P62U
Description 8-Bit Microcontroller for Monitor (32K OTP ROM Type)
Fabricant ETC 
Logo ETC 





1 Page

No Preview Available !





NT68P62U fiche technique
NT68P62-01
8-Bit Microcontroller for Monitor (32K OTP ROM Type)
Features
n Operating voltage range: 4.5V to 5.5V
n CMOS technology for low power consumption
n 6502 8-bit CMOS CPU core
n 8 MHz operation frequency
n 32K bytes of OTP (one time programming) ROM
n 512 bytes of RAM
n One 8-bit base timer
n 13 channels of 8-bit PWM outputs with 5V open drain
n 4 channel A/D converters with 6-bit resolution
n 25 bi-directional I/O port pins (8 dedicated I/O pins)
n Hsync/vsync signals processor for separate &
composite signal, including hardware sync signals
polarity detection and freq. counters with 2 sets of
Hsync counting interval
n Hsync/Vsync polarity controlled output, 5 selectable
free run output signals and self-test patterns, auto-
mute function, half freq. I/O function
n Two built-in I2C bus interfaces support VESA
DDC1/2B+
n Two layers of interrupt management
NMI interrupt sources
- INTE0 (External INT with selectable edge trigger)
- INTMUTE (Auto Mute Activated)
IRQ interrupt sources
- INTS0/1 (SCL Go-low INT)
- INTA0/1 (Slave Address Matched INT)
- INTTX0/1 (Shift Register INT)
- INTRX0/1 (Shift Register INT)
- INTNAK0/1 (No Acknowledge)
- INTSTOP0/1 (Stop Condition Occurred INT)
- INTE1 (External INT with Selectable Edge Trigger)
- INTV (VSYNC INT)
- INTMR (Base Timer INT)
- INTADC (AD Conversion Done INT)
n Hardware watch-dog timer function
n 40-pin P-DIP and 42-pin S-DIP packages
General Description
The NT68P62 is a new generation of monitor µC for auto-
sync and digital control applications. Particularly, this chip
supports various and efficient functions to allow users to
easily develop USB monitors. It contains the 6502 8-bit
CPU core, 512 bytes of RAM used as working RAM and
stack area, 32K bytes of OTP ROM, 13-channel of 8-bit
PWM D/A converters, 4-channel A/D converters for keys
detection which can save I/O pins, one 8-bit pre-loadable
base timer, internal Hsync and Vsync signals processor,
and a watch-dog timer which prevents the system from
abnormal operation and two I2C bus interface. The user
can store EDID data in the 128 bytes of RAM for DDC1/2B,
so that user can reduce a dedicated EEPROM for EDID.
And Half frequency output function can save external one-
shot circuit. All of these designs are committed to offer our
user saving component cost. The 42 pin S-DIP IC provides
two additional I/O pins – port40 & port41, Part number
NT68P62U represents the S-DIP IC. For future reference,
port40 & port42 is only available for the 42 pin S-DIP IC.
1 V2.2

PagesPages 56
Télécharger [ NT68P62U ]


Fiche technique recommandé

No Description détaillée Fabricant
NT68P62 8-Bit Microcontroller for Monitor (32K OTP ROM Type) ETC
ETC
NT68P62-01 8-Bit Microcontroller for Monitor (32K OTP ROM Type) ETC
ETC
NT68P62U 8-Bit Microcontroller for Monitor (32K OTP ROM Type) ETC
ETC

US18650VTC5A

Lithium-Ion Battery

Sony
Sony
TSPC106

PCI Bus Bridge Memory Controller

ATMEL
ATMEL
TP9380

NPN SILICON RF POWER TRANSISTOR

Advanced Semiconductor
Advanced Semiconductor


www.DataSheetWiki.com    |   2020   |   Contactez-nous  |   Recherche