DataSheetWiki


MAX1582ETC fiches techniques PDF

Maxim Integrated - High-Efficiency / 26V Step-Up Converter for White LED Main and Subdisplay Backlighting

Numéro de référence MAX1582ETC
Description High-Efficiency / 26V Step-Up Converter for White LED Main and Subdisplay Backlighting
Fabricant Maxim Integrated 
Logo Maxim Integrated 





1 Page

No Preview Available !





MAX1582ETC fiche technique
19-2783; Rev 0; 4/03
EVAALVUAAILTAIOBNLEKIT High-Efficiency, 26V Step-Up Converter
for White LED Main and Subdisplay Backlighting
General Description
The MAX1582 drives up to six white LEDs in series with
a constant current to provide display backlighting for
two (main and sub-) displays in cell phones and other
hand-held devices. This configuration eliminates the
need for ballast resistors and expensive factory calibra-
tion. The proprietary dual-output, step-up pulse-width
modulation (PWM) converter includes a 30V, low RDSON
N-channel MOSFET switch for high efficiency and maxi-
mum battery life.
The MAX1582 utilizes 1MHz current-mode PWM control
to allow small input and output capacitors and a small
inductor, while minimizing ripple on the input supply and
avoiding interference to sensitive circuitry in the equip-
ment. Integrated overvoltage protection eliminates the
need for an external zener diode to protect the IC from
open circuit. Flexible dimming control utilizes either an
analog control signal or direct digital PWM control with-
out external RC filtering. This also increases dimming
accuracy at low brightness levels. The PWM dimming
signal can be any frequency from 200Hz to 200kHz.
Soft-start eliminates inrush current during startup.
The MAX1582 is available in tiny 4 4 chip-scale
(UCSP™) and 12-pin thin QFN packages.
Applications
Cell Phones with One or Two Displays
Smart Phones, Palmtops, and Wireless
Handhelds
Other Hand-Held Devices with Dual Displays
Typical Application Circuit
INPUT
2.6V TO 5.5V
22µH
2.2µF
ANALOG OR
DIRECT PWM
DIMMING
0.022µF
V+ LX
VP MAX1582
OUT1
CTRL
PGND
0.1µF
2 TO 4 LEDS
EN1 OUT2
EN2
2 TO 3 LEDS
COMP
CS
GND 7.5
MAIN
DISPLAY
SUB-
DISPLAY
Features
o Accurate Current Regulation for Uniform
Illumination
o Lights Up Two LED Sections for Main and
Subdisplays
o Up to 84% Efficiency
o Internal High-Power, 30V MOSFET
o Low 15mVP-P Input Ripple
o Flexible Dimming Control
Analog DAC Controlled
Direct-Digital PWM (No RC Required)
from 200Hz to 200kHz
o Overvoltage Protection to Eliminate Zener Diode
o Constant 1MHz PWM Operation
o Low-Profile Inductor and Capacitors
o Soft-Start Eliminates Inrush Current
o 2.6V to 5.5V Input
o 0.01µA (typ) Shutdown Current
o Tiny UCSP (2.1mm 2.1mm 0.61mm) and Thin
QFN (4mm 4mm) Packages
Ordering Information
PART
TEMP RANGE PIN-PACKAGE
TOP
MARK
MAX1582ETC -40°C to +85°C 12 Thin QFN-EP* AACE
MAX1582EBE-T -40°C to +85°C 16 UCSP-16
1582EBE
*EP = Exposed paddle.
UCSP is a trademark of Maxim Integrated Products, Inc.
Pin Configurations
TOP VIEW
12 11 10
V+ 1
VP 2
CTRL 3
MAX1582
9 OUT2
8 CS
7 EN2
456
4mm x 4mm
THIN QFN
Pin Configurations continued at end of data sheet.
________________________________________________________________ Maxim Integrated Products 1
For pricing, delivery, and ordering information, please contact Maxim/Dallas Direct! at
1-888-629-4642, or visit Maxim’s website at www.maxim-ic.com.

PagesPages 10
Télécharger [ MAX1582ETC ]


Fiche technique recommandé

No Description détaillée Fabricant
MAX1582ETC High-Efficiency / 26V Step-Up Converter for White LED Main and Subdisplay Backlighting Maxim Integrated
Maxim Integrated

US18650VTC5A

Lithium-Ion Battery

Sony
Sony
TSPC106

PCI Bus Bridge Memory Controller

ATMEL
ATMEL
TP9380

NPN SILICON RF POWER TRANSISTOR

Advanced Semiconductor
Advanced Semiconductor


www.DataSheetWiki.com    |   2020   |   Contactez-nous  |   Recherche