DataSheetWiki


MAX1403EAI fiches techniques PDF

Maxim Integrated - +3V / 18-Bit / Low-Power / Multichannel / Oversampling Sigma-Delta ADC

Numéro de référence MAX1403EAI
Description +3V / 18-Bit / Low-Power / Multichannel / Oversampling Sigma-Delta ADC
Fabricant Maxim Integrated 
Logo Maxim Integrated 





1 Page

No Preview Available !





MAX1403EAI fiche technique
19-1481; Rev 0; 4/99
EVAALVUAAILTAIOBNLEKIT +3V, 18-Bit, Low-Power, Multichannel,
Oversampling (Sigma-Delta) ADC
General Description
The MAX1403 18-bit, low-power, multichannel, serial-
output analog-to-digital converter (ADC) features
matched 200µA current sources for sensor excitation.
This ADC uses a sigma-delta modulator with a digital
decimation filter to achieve 16-bit accuracy. The digital
filter’s user-selectable decimation factor allows the con-
version resolution to be reduced in exchange for a
higher output data rate. True 16-bit performance is
achieved at an output data rate of up to 480sps. In
addition, the modulator sampling frequency may be
optimized for either lowest power dissipation or highest
throughput rate. The MAX1403 operates from +3V.
This device offers three fully differential input channels
that may be independently programmed with a gain
between +1V/V and +128V/V. Furthermore, it can com-
pensate an input-referred DC offset up to 117% of the
selected full-scale range. These three differential chan-
nels may also be configured to operate as five pseudo-
differential input channels. Two additional, fully
differential system-calibration channels are provided for
gain and offset error correction.
The MAX1403 can be configured to sequentially scan all
signal inputs and provide the results via the serial inter-
face with minimum communications overhead. When
used with a 2.4576MHz or 1.024MHz master clock, the
digital decimation filter can be programmed to produce
zeros in its frequency response at the line frequency and
associated harmonics, ensuring excellent line rejection
without the need for further postfiltering.
The MAX1403 is available in a 28-pin SSOP package.
Applications
Portable Industrial Instruments
Portable Weigh Scales
Loop-Powered Systems
Pressure Transducers
PART
MAX1403CAI
MAX1403EAI
Ordering Information
TEMP. RANGE
0°C to +70°C
-40°C to +85°C
PIN-PACKAGE
28 SSOP
28 SSOP
SPI and QSPI are trademarks of Motorola, Inc.
Features
o 18-Bit Resolution, Sigma-Delta ADC
o 16-Bit Accuracy with No Missing Codes to 480sps
o Matched On-Board Current Sources (200µA) for
Sensor Excitation
o Low Quiescent Current
250µA (operating mode)
2µA (power-down mode)
o 3 Fully Differential or 5 Pseudo-Differential Signal
Input Channels
o 2 Additional, Fully Differential Calibration
Channels/Auxiliary Input Channels
o Programmable Gain and Offset
o Fully Differential Reference Inputs
o Converts Continuously or On Command
o Automatic Channel Scanning and Continuous
Data Output Mode
o Operates with Analog and Digital Supplies
from +2.7V to +3.6V
o SPI™/QSPI™-Compatible 3-Wire Serial Interface
o 28-Pin SSOP Package
Pin Configuration
TOP VIEW
CLKIN 1
CLKOUT 2
CS 3
RESET 4
DS1 5
DS0 6
OUT2 7
OUT1 8
AGND 9
V+ 10
AIN1 11
AIN2 12
AIN3 13
AIN4 14
MAX1403
SSOP
28 SCLK
27 DIN
26 DOUT
25 INT
24 VDD
23 DGND
22 CALOFF+
21 CALOFF-
20 REFIN+
19 REFIN-
18 CALGAIN+
17 CALGAIN-
16 AIN6
15 AIN5
________________________________________________________________ Maxim Integrated Products 1
For free samples & the latest literature: http://www.maxim-ic.com, or phone 1-800-998-8800.
For small orders, phone 1-800-835-8769.

PagesPages 30
Télécharger [ MAX1403EAI ]


Fiche technique recommandé

No Description détaillée Fabricant
MAX1403EAI +3V / 18-Bit / Low-Power / Multichannel / Oversampling Sigma-Delta ADC Maxim Integrated
Maxim Integrated

US18650VTC5A

Lithium-Ion Battery

Sony
Sony
TSPC106

PCI Bus Bridge Memory Controller

ATMEL
ATMEL
TP9380

NPN SILICON RF POWER TRANSISTOR

Advanced Semiconductor
Advanced Semiconductor


www.DataSheetWiki.com    |   2020   |   Contactez-nous  |   Recherche