DataSheetWiki


MAX1400CAI fiches techniques PDF

Maxim Integrated - Oversampling (Sigma-Delta) ADC

Numéro de référence MAX1400CAI
Description Oversampling (Sigma-Delta) ADC
Fabricant Maxim Integrated 
Logo Maxim Integrated 





1 Page

No Preview Available !





MAX1400CAI fiche technique
19-1430; Rev 1; 7/02
+5V, 18-Bit, Low-Power, Multichannel,
Oversampling (Sigma-Delta) ADC
General Description
The MAX1400 18-bit, low-power, multichannel, serial-
output ADC uses a sigma-delta modulator with a digital
decimation filter to achieve true 16-bit accuracy. The
user-selectable decimation factor of the digital filter
allows the conversion resolution to be reduced in
exchange for a higher output data rate. The device
achieves true 16-bit performance at an output data rate of
up to 480sps. In addition, the modulator sampling
frequency may be optimized for either lowest power
dissipation or highest throughput rate. The MAX1400
operates from +5V.
This device offers three fully differential input channels
that can be independently programmed with a gain
between +1V/V and +128V/V. Furthermore, it can com-
pensate an input-referred DC offset (such as system off-
set) up to 117% of the selected full-scale range. These
three differential channels may also be configured to
operate as five pseudo-differential input channels. Two
additional, fully differential system-calibration channels
are provided for gain and offset error correction. External
access is provided to the multiplexer (mux) output to
facilitate additional signal processing.
The MAX1400 can be configured to scan all signal inputs
sequentially and provide the results through the serial
interface with minimum communications overhead. When
used with a 2.4576MHz or 1.024MHz master clock, the
digital decimation filter can be programmed to produce
zeros in its frequency response at the line fre-
quency and associated harmonics, ensuring excellent
line rejection without the need for further post-filtering.
The MAX1400 comes in a 28-pin SSOP package.
Applications
Portable Industrial Instruments
Portable Weigh Scales
Loop-Powered Systems
Pressure Transducers
PART
MAX1400CAI
MAX1400EAI
Ordering Information
TEMP RANGE
0°C to +70°C
-40°C to +85°C
PIN-PACKAGE
28 SSOP
28 SSOP
SPI and QSPI are trademarks of Motorola, Inc.
Features
o 18-Bit Resolution, Sigma-Delta ADC
o 16-Bit Performance with No Missing Codes
to 480sps
o Low Quiescent Current
250µA (operating mode)
2µA (power-down mode)
o 3 Fully Differential or 5 Pseudo-Differential Signal
Input Channels
o 2 Additional Fully Differential Calibration
Channels/Auxiliary Input Channels
o Access to the Mux Output/ADC Input
o Programmable Gain and Offset
o Fully Differential Reference Inputs
o Converts Continuously or On Command
o Automatic Channel Scanning and Continuous
Data Output Mode
o Operates with +5V Analog Supply and
+3V or +5V Digital Supply
o SPI™/QSPI™-Compatible 3-Wire Serial Interface
o 28-Pin SSOP Package
Pin Configuration
TOP VIEW
CLKIN 1
CLKOUT 2
CS 3
RESET 4
MUXOUT+ 5
MUXOUT- 6
ADCIN+ 7
ADCIN- 8
AGND 9
V+ 10
AIN1 11
AIN2 12
AIN3 13
AIN4 14
MAX1400
SSOP
28 SCLK
27 DIN
26 DOUT
25 INT
24 VDD
23 DGND
22 CALOFF+
21 CALOFF-
20 REFIN+
19 REFIN-
18 CALGAIN+
17 CALGAIN-
16 AIN6
15 AIN5
________________________________________________________________ Maxim Integrated Products 1
For pricing, delivery, and ordering information, please contact Maxim/Dallas Direct! at
1-888-629-4642, or visit Maxim’s website at www.maxim-ic.com.

PagesPages 30
Télécharger [ MAX1400CAI ]


Fiche technique recommandé

No Description détaillée Fabricant
MAX1400CAI Oversampling (Sigma-Delta) ADC Maxim Integrated
Maxim Integrated

US18650VTC5A

Lithium-Ion Battery

Sony
Sony
TSPC106

PCI Bus Bridge Memory Controller

ATMEL
ATMEL
TP9380

NPN SILICON RF POWER TRANSISTOR

Advanced Semiconductor
Advanced Semiconductor


www.DataSheetWiki.com    |   2020   |   Contactez-nous  |   Recherche