DataSheetWiki


MAX115 fiches techniques PDF

Maxim Integrated - 2x4-Channel / Simultaneous-Sampling 12-Bit ADCs

Numéro de référence MAX115
Description 2x4-Channel / Simultaneous-Sampling 12-Bit ADCs
Fabricant Maxim Integrated 
Logo Maxim Integrated 





1 Page

No Preview Available !





MAX115 fiche technique
19-1928; Rev 0; 1/01
EVAALVUAAILTAIOBNLEKIT
2x4-Channel, Simultaneous-Sampling
12-Bit ADCs
________________General Description
The MAX115/MAX116 are high-speed, multichannel,
12-bit data-acquisition systems (DAS) with simultane-
ous track/holds (T/Hs). These devices contain a 12-bit,
2µs, successive-approximation analog-to-digital con-
verter (ADC), a +2.5V reference, a buffered reference
input, and a bank of four simultaneous-sampling T/H
amplifiers that preserve the relative phase information
of the sampled inputs. The MAX115/MAX116 have two
multiplexed inputs for each T/H, allowing a total of eight
inputs. In addition, the converter is overvoltage tolerant
to ±17V. A fault condition on any channel will not dam-
age the IC. Available input ranges are ±5V (MAX115)
and ±2.5V (MAX116).
The parallel interface’s data access and bus release
timing specifications are compatible with most popular
digital signal processors and 16-bit/32-bit microproces-
sors. The MAX115/MAX116 conversion results can be
accessed without resorting to wait-states.
________________________Applications
Multiphase Motor Control
Power-Grid Synchronization
Power-Factor Monitoring
Digital Signal Processing
Vibration and Waveform Analysis
____________________________Features
o Four Simultaneous-Sampling T/H Amplifiers with
Two Multiplexed Inputs (Eight Single-Ended
Inputs Total)
o 2µs Conversion Time per Channel
o Throughput: 390ksps (1 Channel)
218ksps (2 Channels)
152ksps (3 Channels)
116ksps (4 Channels)
o Input Range: ± 5V (MAX115)
± 2.5V (MAX116)
o Fault-Protected Input Multiplexer (±17V)
o Internal +2.5V or External Reference Operation
o Programmable On-Board Sequencer
o High-Speed Parallel DSP Interface
o Internal 10MHz Clock
Ordering Information
PART
MAX115CAX
MAX115EAX
MAX116CAX
MAX116EAX
TEMP. RANGE
0°C to +70°C
-40°C to +85°C
0°C to +70°C
-40°C to +85°C
PIN-PACKAGE
36 SSOP
36 SSOP
36 SSOP
36 SSOP
Pin Configuration
Typical Operating Circuit
TOP VIEW
CH2B 1
CH2A 2
CH1B 3
CH1A 4
AVDD 5
REFIN 6
REFOUT 7
AGND 8
D11 (MSB) 9
D10 10
D9 11
D8 12
D7 13
D6 14
D5 15
D4 16
DVDD 17
DGND 18
MAX115
MAX116
SSOP
36 AGND
35 CH3B
34 CH3A
33 CH4B
32 CH4A
31 AVSS
30 INT
29 CONVST
28 RD
27 WR
26 CS
25 CLK
24 A0
23 A1
22 D0/A2 (LSB)
21 D1/A3
20 D2
19 D3
+5V
0.1µF
0.1µF
-5V
0.1µF
CH1A
CH1B
CH2A
CH2B
CH3A
CH3B
CH4A
CH4B
AVDD
AGND
AVSS
REFIN
MAX115
MAX116
A0
A1
D0/A2
D1/A3
D2
D3
D4
D5
D6
D7
D8
D9
D10
D11
DVDD
4.7µF
REFOUT
DGND
CLK CONVST INT CS RD WR
16MHz
CONTROL INTERFACE
+5V
0.1µF
________________________________________________________________ Maxim Integrated Products 1
For price, delivery, and to place orders, please contact Maxim Distribution at 1-888-629-4642,
or visit Maxim’s website at www.maxim-ic.com.

PagesPages 14
Télécharger [ MAX115 ]


Fiche technique recommandé

No Description détaillée Fabricant
MAX110 Low-Cost / 2-Channel / 14-Bit Serial ADCs Maxim Integrated
Maxim Integrated
MAX1101 Single-Chip / 8-Bit CCD Digitizer with Clamp and 6-Bit PGA Maxim Integrated
Maxim Integrated
MAX11014 (MAX11014 / MAX11015) Automatic RF MESFET Amplifier Drain-Current Controllers Maxim Integrated Products
Maxim Integrated Products
MAX11015 (MAX11014 / MAX11015) Automatic RF MESFET Amplifier Drain-Current Controllers Maxim Integrated Products
Maxim Integrated Products

US18650VTC5A

Lithium-Ion Battery

Sony
Sony
TSPC106

PCI Bus Bridge Memory Controller

ATMEL
ATMEL
TP9380

NPN SILICON RF POWER TRANSISTOR

Advanced Semiconductor
Advanced Semiconductor


www.DataSheetWiki.com    |   2020   |   Contactez-nous  |   Recherche