|
|
PDF MAX1005 Data sheet ( Hoja de datos )
| Número de pieza | MAX1005 | |
| Descripción | IF Undersampler | |
| Fabricantes | Maxim Integrated | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de MAX1005 (archivo pdf) en la parte inferior de esta página. Total 8 Páginas | ||
|
No Preview Available !
19-1291; Rev 0; 9/97
IF Undersampler
_______________General Description
The MAX1005 is a combined digitizer and reconstruc-
tion integrated circuit designed to work in systems that
demodulate and modulate communications signals. It
integrates IF undersampling and signal synthesis func-
tions into a single, low-power circuit. Its analog-to-
digital converter (ADC) is used to directly sample or
undersample a downconverted RF signal, while its
digital-to-analog converter (DAC) recreates the IF sub-
carrier and transmission data. The MAX1005’s ADC is
ideal for undersampling applications, due to the analog
input amplifier’s wide (15MHz) bandwidth. The DAC
has very low glitch energy, which minimizes the trans-
mission of unwanted spurious signals. An on-chip
reference provides for low-noise ADC and DAC conver-
sions.
The MAX1005 provides a high level of signal integrity
from a low power budget. It operates from a single
power supply, or from separate analog and digital sup-
plies with independent voltages ranging from +2.7V to
+5.5V. The MAX1005 can operate with an unregulated
analog supply of 5.5V and a regulated digital supply
down to 2.7V. This flexible power-supply operation
saves additional power in complex digital systems.
The MAX1005 has three operating modes: transmit
(DAC active), receive (ADC active), and shutdown
(ADC and DAC inactive). In shutdown mode, the total
supply current drops below 1µA. The device requires
only 2.4µs to wake up from shutdown mode. The
MAX1005 is ideal for hand-held, as well as base-station
applications. It is available in a tiny 16-pin QSOP pack-
age specified for operation over both the commercial
and extended temperature ranges.
________________________Applications
PWT1900
PHS/P
Wireless Loops
PCS/N
____________________________Features
o Differential-Input, 5-Bit ADC
o Differential-Output, 7-Bit DAC
o 15Msps Min Conversion Rate
o 25MHz -1dB Full-Power Bandwidth
o 44dB SFDR for ADC
39dB at 10.7MHz SFDR (Imaged) for DAC
o Internal Voltage Reference
o Parallel Logic Interface
o Single-Supply Operation (+2.7V to +5.5V)
o 0.1µA Low-Power Shutdown Mode
______________Ordering Information
PART
MAX1005CEE
MAX1005EEE
TEMP. RANGE
0°C to +70°C
-40°C to +85°C
PIN-PACKAGE
16 QSOP
16 QSOP
__________________Pin Configuration
TOP VIEW
VCCD 1
DGND 2
RXEN 3
AIO+ 4
AIO- 5
TXEN 6
AGND 7
VCCA 8
MAX1005
QSOP
16 CLK
15 D0
14 D1
13 D2
12 D3
11 D4
10 D5
9 D6
Functional Diagram appears at end of data sheet.
________________________________________________________________ Maxim Integrated Products 1
For free samples & the latest literature: http://www.maxim-ic.com, or phone 1-800-998-8800.
For small orders, phone 408-737-7600 ext. 3468.
1 page  
IF Undersampler
__________________________________________Typical Operating Characteristics
(VCCA = VCCD = 3.0V, TA = +25°C, unless otherwise noted.)
RECEIVE ADC
INTEGRAL NONLINEARITY
0.50
0.40
0.30
0.20
0.10
0.00
-0.10
-0.20
-0.30
-0.40
-0.50
-15 -12 -9 -6 -3 0 3 6 9 12 15
CODE
TRANSMIT DAC
DIFFERENTIAL NONLINEARITY
0.5
0.4
0.3
0.2
0.1
0
-0.1
-0.2
-0.3
-0.4
-0.5
-64 -48 -32 -16 0 16 32 48
CODE
64
RECEIVE ADC
DIFFERENTIAL NONLINEARITY
0.50
0.40
0.30
0.20
0.10
0.00
-0.10
-0.20
-0.30
-0.40
-0.50
-15 -12 -9 -6 -3 0 3 6 9 12 15
CODE
RECEIVE ADC FFT PLOT
30
20 fIN = 10.7MHz
fCLK = 15MHz
10 256 POINTS
0
-10
-20
-30
-40
-50
-60
-70
0
1.465 2.930 4.395 5.860
FREQUENCY (MHz)
7.325
TRANSMIT DAC
INTEGRAL NONLINEARITY
0.5
0.4
0.3
0.2
0.1
0
-0.1
-0.2
-0.3
-0.4
-0.5
-64 -48 -32 -16 0 16 32 48
CODE
64
FULL POWER ANALOG
INPUT BANDWIDTH
0
-1 VIN = 90% OF FULL SCALE
-2
-3
-4
-5
-6
-7
1
10
ANALOG INPUT FREQUENCY (MHz)
100
_______________________________________________________________________________________ 5
5 Page | ||
| Páginas | Total 8 Páginas | |
| PDF Descargar | [ Datasheet MAX1005.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| MAX100 | 250Msps / 8-Bit ADC with Track/Hold | Maxim Integrated |
| MAX1002 | Low-Power / 60Msps / Dual / 6-Bit ADC | Maxim Integrated |
| MAX1003 | Low-Power / 90Msps / Dual 6-Bit ADC | Maxim Integrated |
| MAX1005 | IF Undersampler | Maxim Integrated |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |