DataSheetWiki


MA4SPS502 fiches techniques PDF

Tyco - Surface Mount Monolithic PIN Diode Chip

Numéro de référence MA4SPS502
Description Surface Mount Monolithic PIN Diode Chip
Fabricant Tyco 
Logo Tyco 





1 Page

No Preview Available !





MA4SPS502 fiche technique
Surface Mount Monolithic
PIN Diode Chip
Features
n Surface Mount Device
n No Wirebonds Required
n Rugged Silicon-Glass Construction
n Silicon Nitride Passivation
n Polymer Scratch Protection
n Low Parasitic Capacitance and Inductance
n High Power Handling (Efficient Heatsinking)
Case Style ODS-12701,2
Description
This device is a silicon-glass PIN diode chip fabricated with
M/A-COM’s patented HMICprocess. This device features
two silicon pedestals embedded in a low loss glass. The diode
is formed on the top of one pedestal and connections to the
backside of the device are facilitated by making the pedestal
sidewalls conductive. Selective backside metalization is
applied producing a surface mount device. The topside is fully
encapsulated with silicon nitride and has an additional polymer
layer for scratch protection. These protective coatings prevent
damage to the junction and the anode air-bridge during
handling and assembly.
Applications
These packageless devices are suitable for usage in moderate
incident power (10 W C.W.) or higher incident peak power
(500 W) series, shunt, or series-shunt switches. Small parasitic
inductance, 0.35 nH, and excellent RC time constant, 0.22 pS,
make the devices ideal for wireless TR switch and accessory
switch circuits, where higher P1dB and IP3 values are required.
These diodes can also be used in π, T, tapered resistance, and
switched-pad attenuator control circuits for 50or 75
systems.
Absolute Maximum Ratings1
@ TA = +25°C (unless otherwise specified)
Parameter
Absolute Maximum
Reverse Voltage
Forward Current
Operating Temperature
Storage Temperature
Dissipated Power (RF & DC)
Mounting Temperature
-300 V
600 mA
-65 °C to +150 °C
-65 °C to +150 °C
2W
+235 °C for 10 seconds
1. Backside metal: 0.1 micron thk. gold.
2. Hatched areas indicate bond pads.
Dim Inches
Millimeters
Min. Max. Min. Max.
A
0.056
0.058 1.435 1.485
B
0.022
0.024 0.555 0.605
C
0.004
0.008 0.102 0.203
D
0.020
0.022 0.505 0.555
E
0.013
0.015 0.325 0.375
1. Exceeding these limits may cause permanent damage.

PagesPages 3
Télécharger [ MA4SPS502 ]


Fiche technique recommandé

No Description détaillée Fabricant
MA4SPS502 Surface Mount Monolithic PIN Diode Chip Tyco
Tyco

US18650VTC5A

Lithium-Ion Battery

Sony
Sony
TSPC106

PCI Bus Bridge Memory Controller

ATMEL
ATMEL
TP9380

NPN SILICON RF POWER TRANSISTOR

Advanced Semiconductor
Advanced Semiconductor


www.DataSheetWiki.com    |   2020   |   Contactez-nous  |   Recherche