DataSheetWiki


IDT23S05E-1DC fiches techniques PDF

Integrated Device - 3.3V ZERO DELAY CLOCK BUFFER / SPREAD SPECTRUM COMPATIBLE

Numéro de référence IDT23S05E-1DC
Description 3.3V ZERO DELAY CLOCK BUFFER / SPREAD SPECTRUM COMPATIBLE
Fabricant Integrated Device 
Logo Integrated Device 





1 Page

No Preview Available !





IDT23S05E-1DC fiche technique
IDT23S05E
3.3V ZERO DELAY CLOCK BUFFER, SPREAD SPECTRUM
COMMERCIAL AND INDUSTRIAL TEMPERATURE RANGES
3.3V ZERO DELAY CLOCK
BUFFER, SPREAD SPECTRUM
COMPATIBLE
IDT23S05E
FEATURES:
• Phase-Lock Loop Clock Distribution
• 10MHz to 200MHz operating frequency
• Distributes one clock input to one bank of five outputs
• Zero Input-Output Delay
• Output Skew < 250ps
• Low jitter <200 ps cycle-to-cycle
• IDT23S05E-1 for Standard Drive
• IDT23S05E-1H for High Drive
• No external RC network required
• Operates at 3.3V VDD
• Power down mode
• Spread spectrum compatible
• Available in SOIC package
DESCRIPTION:
The IDT23S05E is a high-speed phase-lock loop (PLL) clock buffer,
designed to address high-speed clock distribution applications. The zero
delay is achieved by aligning the phase between the incoming clock and
the output clock, operable within the range of 10 to 200MHz.
The IDT23S05E is an 8-pin version of the IDT23S09E. IDT23S05E
accepts one reference input, and drives out five low skew clocks. The -1H
version of this device operates up to 200MHz frequency and has a higher
drive than the -1 device. All parts have on-chip PLLs which lock to an input
clock on the REF pin. The PLL feedback is on-chip and is obtained from the
CLKOUT pad. In the absence of an input clock, the IDT23S05E enters
power down. In this mode, the device will draw less than 12µA for
Commercial Temperature range and less than 25µA for Industrial tempera-
ture range, the outputs are tri-stated, and the PLL is not running, resulting
in a significant reduction of power.
The IDT23S05E is characterized for both Industrial and Commercial
operation.
FUNCTIONAL BLOCK DIAGRAM
REF 1
PLL
Control
Logic
8
CLKOUT
3 CLK1
2 CLK2
5 CLK3
7
CLK4
The IDT logo is a registered trademark of Integrated Device Technology, Inc.
COMMERCIAL AND INDUSTRIAL
c 2003 Integrated Device Technology, Inc.
TEMPERATURE
1
RANGES
OCTOBER 2003
DSC - 6398/5

PagesPages 8
Télécharger [ IDT23S05E-1DC ]


Fiche technique recommandé

No Description détaillée Fabricant
IDT23S05E-1DC 3.3V ZERO DELAY CLOCK BUFFER / SPREAD SPECTRUM COMPATIBLE Integrated Device
Integrated Device
IDT23S05E-1DCI 3.3V ZERO DELAY CLOCK BUFFER / SPREAD SPECTRUM COMPATIBLE Integrated Device
Integrated Device

US18650VTC5A

Lithium-Ion Battery

Sony
Sony
TSPC106

PCI Bus Bridge Memory Controller

ATMEL
ATMEL
TP9380

NPN SILICON RF POWER TRANSISTOR

Advanced Semiconductor
Advanced Semiconductor


www.DataSheetWiki.com    |   2020   |   Contactez-nous  |   Recherche