DataSheet.es    


PDF M5M5J167KT-70HI Data sheet ( Hoja de datos )

Número de pieza M5M5J167KT-70HI
Descripción CMOS STATIC RAM
Fabricantes Hitachi 
Logotipo Hitachi Logotipo



Hay una vista previa y un enlace de descarga de M5M5J167KT-70HI (archivo pdf) en la parte inferior de esta página.


Total 11 Páginas

No Preview Available ! M5M5J167KT-70HI Hoja de datos, Descripción, Manual

To all our customers
Regarding the change of names mentioned in the document, such as Mitsubishi
Electric and Mitsubishi XX, to Renesas Technology Corp.
The semiconductor operations of Hitachi and Mitsubishi Electric were transferred to Renesas
Technology Corporation on April 1st 2003. These operations include microcomputer, logic, analog
and discrete devices, and memory chips other than DRAMs (flash memory, SRAMs etc.)
Accordingly, although Mitsubishi Electric, Mitsubishi Electric Corporation, Mitsubishi
Semiconductors, and other Mitsubishi brand names are mentioned in the document, these names
have in fact all been changed to Renesas Technology Corp. Thank you for your understanding.
Except for our corporate trademark, logo and corporate statement, no changes whatsoever have been
made to the contents of the document, and these changes do not constitute any alteration to the
contents of the document itself.
Note : Mitsubishi Electric will continue the business operations of high frequency & optical devices
and power devices.
Renesas Technology Corp.
Customer Support Dept.
April 1, 2003

1 page




M5M5J167KT-70HI pdf
Jan.10,2003 Ver. 2.1
M5M5J167KT - 70HI
MITSUBISHI LSIs
16777216-BIT (1048576-WORD BY 16-BIT / 2097152-WORD BY 8-BIT) CMOS STATIC RAM
ABSOLUTE MAXIMUM RATINGS
Symbol
Parameter
Conditions
Vcc Supply v oltage
VI Input v oltage
With respect to GND
With respect to GND
VO Output v oltage
With respect to GND
Pd Power dissipation
Ta = 25°C
T a Operating temperature
T stg Storage temperature
Ratings
- 0.3* ~ +4.6
- 0.3* ~ Vcc + 0.3 (max. 4.6V)
0 ~ Vcc
700
-40 ~ +85
- 65 ~ +150
* -3.0V in case of AC (Pulse<=width
Units
V
mW
ºC
ºC
30ns)
DC ELECTRICAL CHARACTERISTICS (Ta=-40~85ºC Vcc=2.7V~3.6V,unless otherwise noted)
Symbol
Parameter
Conditions
Limits
Min
Ty p Max
Units
VIH High-lev el input v oltage
2.2 Vcc+0.2V
VIL
VOH
V OL
II
IO
Icc1
Icc2
Icc3
Icc4
Low-lev el input v oltage
High-level output voltage
IOH= - 0.5mA
Low-lev el output v oltage IOL= 2.0mA
Input leakage current VI =0 ~ Vcc
Output leakage current BC1# and BC2#=VIH or S1#=VIH or S2=VIL or OE#=VIH, VI/O=0 ~ Vcc
Activ e supply c urrent
( AC,MOS lev el )
BC1# and BC2# < 0.2V, S1# < 0.2V, S2 >Vcc-0.2V
other inputs < 0.2V or > Vcc-0.2V
Output - open (duty 100%)
f = 10MHz
f = 1MHz
Activ e supply c urrent
( AC,TTL lev el )
BC1# and BC2#=V IL , S1#=V IL ,S2=V IH
other pins =V IH or VIL
Output - open (duty 100%)
f = 10MHz
f = 1MHz
(1) S1# > Vcc - 0.2V and S2 > Vcc - 0.2V,
BYTE# > Vcc - 0.2V or < 0.2V,
other inputs = 0 ~ Vcc
(2)S2 < 0.2V,
Stand by s upply current
BYTE# > Vcc - 0.2V or < 0.2V,
other inputs = 0 ~ Vcc
( AC,MOS lev el ) (3) BC1# and BC2# > Vcc - 0.2V
S1# < 0.2V, S2 > Vcc - 0.2V
BYTE# > Vcc - 0.2V or < 0.2V,
A19 > Vcc - 0.2V or < 0.2V
other inputs = 0 ~ Vcc
Stand by s upply current
BC1# and BC2# =VIH or S1# =VIH or S2=VIL
BYTE# > Vcc - 0.2V or < 0.2V,
( AC,TTL lev el )
A19 =V IH or V IL
Other inputs= 0 ~ Vcc
~ +25°C
~ +40°C
~ +70°C
~ +85°C
- 0.2 *
2.4
-
-
-
-
-
-
-
-
-
30
5
30
5
2.0
2.4
-
-
-
0.6
0.4
±1
±1
50
15
50
15
10
16
40
80
2.0
V
µA
mA
µA
mA
Note 3: Direction for current flowing into IC is indicated as positive (no mark)
* -1.0V in case of AC (Pulse width <= 30ns)
Note 4: Typical parameter indicates the value for the center of distribution at 3.0V, and not 100% tested.
CAPACITANCE (Ta=-40~+85ºC Vcc=2.7V~3.6V,unless otherwise noted)
Symbol
Parameter
CI Input capacitance
CO Output capacitance
Conditions
VI=GND, VI=25mVrms, f =1MHz
VO=GND,VO=25mVrms, f =1MHz
Limits
Min Ty p Max
20
20
Units
pF
4

5 Page





M5M5J167KT-70HI arduino
Jan.10,2003 Ver. 2.1
M5M5J167KT - 70HI
MITSUBISHI LSIs
16777216-BIT (1048576-WORD BY 16-BIT / 2097152-WORD BY 8-BIT) CMOS STATIC RAM
Keep safety first in your circuit designs!
Mitsubishi Electric Corporation puts the maximum effort into making semiconductor products betterand more
reliable, but there isalways the possibility that trouble may occur with them. Trouble with semiconductors may lead
to personal injury, fire or property damage. Remember to give due consideration to safety when making your
circuit designs, with appropriate measures such as (i) placement of substitutive, auxiliary circuits, (ii) use of non-
flammable material or (iii) prevention against any malfunction or mishap.
Notes regarding these materials
These materials are intended as a reference to assist our customers in the selection of the Mitsubishi
semiconductor product best suited to the customer's application; they do not convey any license under any
intellectual property rights, or any other rights, belonging to Mitsubishi Electric Corporation or a third party.
Mitsubishi Electric Corporation assumes no responsibility for any damage, or infringement of any third-party's
rights, originating in the use of any product data, diagrams, charts, programs, algorithms, or circuit application
examples contained in these materials.
All information contained in these materials, including product data, diagrams, charts, programs and algorithms
represents information on products at the time of publication of these materials, and are subject to change by
Mitsubishi Electric Corporation without notice due to product improvements or other reasons. It is therefore
recommended that customers contact Mitsubishi Electric Corporation or an authorized Mitsubishi Semiconductor
product distributor for the latest product information before purchasing a product listed herein.
The information described here may contain technical inaccuracies or typographical errors. Mitsubishi Electric
Corporation assumes no responsibility for any damage, liability, or other loss rising from these inaccuracies or
errors.
Please also pay attention to information published by Mitsubishi Electric Corporation by various means,
including the Mitsubishi Semiconductor home page (http://www.mitsubishichips.com).
When using any or all of the information contained in these materials, including product data, diagrams, charts,
programs, and algorithms, please be sure to evaluate all information as a total system before making a final
decision on the applicability of the information and products. Mitsubishi Electric Corporation assumes no
responsibility for any damage, liability or other loss resulting from the information contained herein.
Mitsubishi Electric Corporation semiconductors are not designed or manufactured for use in a device or system
that is used under circumstances in which human life is potentially at stake. Please contact Mitsubishi Electric
Corporation or an authorized Mitsubishi Semiconductor product distributor when considering the use of a product
contained herein for any specific purposes, such as apparatus or systems for transportation, vehicular, medical,
aerospace, nuclear, or undersea repeater use.
The prior written approval of Mitsubishi Electric Corporation is necessary to reprint or reproduce in whole or in
part these materials.
If these products or technologies are subject to the Japanese export control restrictions, they must be exported
under a license from the Japanese government and cannot be imported into a country other than the approved
destination. Any diversion or reexport contrary to the export control laws and regulations of Japan and/or the
country of destination is prohibited.
Please contact Mitsubishi Electric Corporation or an authorized Mitsubishi Semiconductor product distributor for
further details on these materials or the products contained therein.

11 Page







PáginasTotal 11 Páginas
PDF Descargar[ Datasheet M5M5J167KT-70HI.PDF ]




Hoja de datos destacado

Número de piezaDescripciónFabricantes
M5M5J167KT-70HICMOS STATIC RAMHitachi
Hitachi

Número de piezaDescripciónFabricantes
SLA6805M

High Voltage 3 phase Motor Driver IC.

Sanken
Sanken
SDC1742

12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters.

Analog Devices
Analog Devices


DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares,
permitiéndote verlos en linea o descargarlos en PDF.


DataSheet.es    |   2020   |  Privacy Policy  |  Contacto  |  Buscar