|
|
PDF LA6393D Data sheet ( Hoja de datos )
| Número de pieza | LA6393D | |
| Descripción | High-Performance Dual Comparator | |
| Fabricantes | Sanyo | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de LA6393D (archivo pdf) en la parte inferior de esta página. Total 5 Páginas | ||
|
No Preview Available !
Ordering number : EN999D
LA6393D
LA6393S
Monolithic Linear IC
High-Performance Dual Comparator
Overview
The LA6393D and 6393S are high-performance dual comparators that are capable of operating from a single power
supply voltage over a wide range of 2 to 36V. Because of their excellent input characteristics and low power, they
can be very conveniently applied to multisignal parallel comparator circuits that require high-density assembly.
Features
• LA6393D: DIP-8 pin package, LA6393S: SIP-9 pin package.
• Wide operating power-supply voltage range (Single power supply: 2.0 to 36.0V, dual power supplies:
±1.0 to ±18.0V).
• Wide common-mode input voltage range (0 to VCC-1.5V).
• Open-collector output enabling wired OR.
• Small current drain (0.6mA) and low power.
Specifications
Absolute Maximum Ratings at Ta = 25°C
Parameter
Maximum supply voltage
Differential input voltage
Common-mode input voltage range
Allowable power dissipation
Operating temperature
Storage temperature
Symbol
VCC max
VID
VICM
Pd max
Topr
Tstg
Conditions
Ratings
36
36
-0.3 to +36
570
-30 to +85
-55 to +125
Unit
V
V
V
mW
°C
°C
Any and all SANYO Semiconductor products described or contained herein do not have specifications
that can handle applications that require extremely high levels of reliability, such as life-support systems,
aircraft's control systems, or other applications whose failure can be reasonably expected to result in
serious physical and/or material damage. Consult with your SANYO Semiconductor representative
nearest you before usingany SANYO Semiconductor products described or contained herein in such
applications.
SANYO Semiconductor assumes no responsibility for equipment failures that result from using products
at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition
ranges, or other parameters) listed in products specifications of any and all SANYO Semiconductor
products described or contained herein.
O1806 MS IM / 40500TN (KT) / 1300TA / 7087KI / 4235MW / 6032KI, ID No.999-1/5
1 page  
LA6393D / LA6393S
6 VO, VIN - t
+5V
5 5.1kΩ
VIN
4-
6 VO, VIN - t
5
4
3
+ VO
3
22
+5V
1 1 5.1kΩ
VIN
0 0-
0 100 + VO
-50 50
-100
-150
-1.0 -0.5 0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0
Time, t - µs
ILA01106
0
-50
-1.0 -0.5 0
0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0
Time, t - µs
ILA01107
Sample Application Circuits
VREF
VIN
10kΩ
VCC
3kΩ
VOUT
10kΩ
51kΩ
51kΩ
1MΩ
VCC
15kΩ
51kΩ
VOUT
Voltage comparator
(with hysteresis)
Square wave generator
ILA07114
Specifications of any and all SANYO Semiconductor products described or contained herein stipulate the
performance, characteristics, and functions of the described products in the independent state, and are
not guarantees of the performance, characteristics, and functions of the described products as mounted
in the customer's products or equipment. To verify symptoms and states that cannot be evaluated in an
independent device, the customer should always evaluate and test devices mounted in the customer's
products or equipment.
SANYO Semiconductor Co., Ltd. strives to supply high-quality high-reliability products. However, any
and all semiconductor products fail with some probability. It is possible that these probabilistic failures
could give rise to accidents or events that could endanger human lives, that could give rise to smoke or
fire, or that could cause damage to other property. When designing equipment, adopt safety measures
so that these kinds of accidents or events cannot occur. Such measures include but are not limited to
protective circuits and error prevention circuits for safe design, redundant design, and structural design.
In the event that any or all SANYO Semiconductor products (including technical data,services) described
or contained herein are controlled under any of applicable local export control laws and regulations, such
products must not be exported without obtaining the export license from the authorities concerned in
accordance with the above law.
No part of this publication may be reproduced or transmitted in any form or by any means, electronic or
mechanical, including photocopying and recording, or any information storage or retrieval system, or
otherwise, without the prior written permission of SANYO Semiconductor Co., Ltd.
Any and all information described or contained herein are subject to change without notice due to
product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification"
for the SANYO Semiconductor product that you intend to use.
Information (including circuit diagrams and circuit parameters) herein is for example only; it is not
guaranteed for volume production. SANYO Semiconductor believes information herein is accurate and
reliable, but no guarantees are made or implied regarding its use or any infringements of intellectual
property rights or other rights of third parties.
This catalog provides information as of October, 2006. Specifications and information herein are subject
to change without notice.
PS No.999-5/5
5 Page | ||
| Páginas | Total 5 Páginas | |
| PDF Descargar | [ Datasheet LA6393D.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| LA6393D | High Performance Dual Comparator | Sanyo |
| LA6393D | High-Performance Dual Comparator | Sanyo |
| LA6393M | High-Performance Dual Comparator | Sanyo |
| LA6393S | High-Performance Dual Comparator | Sanyo |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |