DataSheetWiki


PDSP16510AA0AC fiches techniques PDF

Mitel Networks Corporation - Stand Alone FFT Processor

Numéro de référence PDSP16510AA0AC
Description Stand Alone FFT Processor
Fabricant Mitel Networks Corporation 
Logo Mitel Networks Corporation 





1 Page

No Preview Available !





PDSP16510AA0AC fiche technique
PDSP1PD6S5P11605A10
Stand Alone FFT Processor
Supersedes version in December 1993 Digital Video & DSP IC Handbook, HB3923-1
DS3475 - 4.4 May 1996
The PDSP16510 performs Forward or Inverse Fast
Fourier Transforms on complex or real data sets containing up
to 1024 points. Data and coefficients are each represented by
16 bits, with block floating point arithmetic for increased
dynamic range.
An internal RAM is provided which can hold up to 1024
complex data points. This removes the memory transfer
bottleneck, inherent in building block solutions. Its organisa-
tion allows the PDSP16510 to simultaneously input new data,
transform data stored in the RAM, and to output previous
results. No external buffering is needed for transforms con-
taining up to 256 points, and the PDSP16510 can be directly
connected to an A/D converter to perform continuous trans-
forms. The user can choose to overlap data blocks by either
0%, 50%, or 75%. Inputs and outputs are synchronous to the
40MHz system clock used for internal operations.
A 1024 point complex transform can be completed in
some 98µs, which is equivalent to throughput rates of 450
million operations per second. Multiple devices can be con-
nected in parallel in order to increase the sampling rate up to
the 40MHz system clock. Six devices are needed to give the
maximum performance with 1024 point transforms.
Either a Hamming or a Blackman-Harris window operator
can be internally applied to the incoming real or complex data.
The latter gives 67dB side lobe attenuation. The operator
values are calculated internally and do not require an external
ROM nor do they incur any time penalty.
The device outputs the real and imaginary components of
the frequency bins. These can be directly connected to the
PDSP16330 in order to produce magnitude and phase values
from the complex data.
ASSOCIATED PRODUCTS
PDSP16540 Bucket Buffer
PDSP16330 Pythagoras Processor.
PDSP16256 Programmable FIR Filter.
PDSP16350 I/Q Splitter / NCO
DATA INPUT
3 TERM
WINDOW
OPERATOR
COEFFICIENT
ROM
WORKSPACE
RAM
WORKSPACE
RAM
FOUR
DATA PATHS
OUTPUT
BUFFER
RESULT OUPUT
Fig. 1. Block Diagram
FEATURES
Completely self contained FFT Processor
Internal RAM supports up to1024 complex points
16 bit data and coefficients plus block floating point for
increased dynamic range
450 MIP operation gives 98 microsecond transforma-
tion times for 1024 points
Up to 40MHz sampling rates with multiple devices.
Internal window operator gives 67dB side lobe
attenuation and needs no external ROM.
84 pin PGA or 132 surface mount package
SAMPLE
CLOCK
ANALOG
INPUT
CONFIGURATION
WORD
DIS
AUX15:0
GND
INEN DOS
R15:0
PDSP16510
A/D D15:0
I15:0
DEF DEN DAV S3:0
CLK
X
PDSP16330
Y
PHASE
MAGNITUDE
GND
RESET
SCALE VALUE
AVAILABLE
Fig. 2. Typical 256 Point Real Only System Performing Continuous Transforms
1

PagesPages 25
Télécharger [ PDSP16510AA0AC ]


Fiche technique recommandé

No Description détaillée Fabricant
PDSP16510AA0AC Stand Alone FFT Processor Mitel Networks Corporation
Mitel Networks Corporation

US18650VTC5A

Lithium-Ion Battery

Sony
Sony
TSPC106

PCI Bus Bridge Memory Controller

ATMEL
ATMEL
TP9380

NPN SILICON RF POWER TRANSISTOR

Advanced Semiconductor
Advanced Semiconductor


www.DataSheetWiki.com    |   2020   |   Contactez-nous  |   Recherche