DataSheetWiki


M54975 fiches techniques PDF

Mitsubishi - Bi-CMOS 8-BIT SERIAL-INPUT LATCHED DRIVER

Numéro de référence M54975
Description Bi-CMOS 8-BIT SERIAL-INPUT LATCHED DRIVER
Fabricant Mitsubishi 
Logo Mitsubishi 





1 Page

No Preview Available !





M54975 fiche technique
MITSUBISHI <CONTROL / DRIVER IC>
M54975P/FP
Bi-CMOS 8-BIT SERIAL-INPUT LATCHED DRIVER
DESCRIPTION
The M54975 is a semiconductor integrated circuit fabricated using
Bi-CMOS technology. It contains a serial input to serial/parallel
output 8-bit CMOS shift register and CMOS latch as well as bipolar
8-bit parallel-output driver.
FEATURES
q Serial input to serial/parallel output
q Cascade connections possible through serial output
q Latch circuit included for each stage
q Enable input for output control
q Low supply current .................................. ICC 10µA at standby
q Serial input/output level is compatible with standard CMOS
q Driver : Withstand voltage ...................................... BVCEO 30V
Large drive current ................................ (IO(max)=300mA)
q Wide operating temperature range ..................... Ta=-20 – +75°C
APPLICATION
Thermal printer head dot driver, Serial-to parallel conversion, Relay
and Solenoid driver
FUNCTION
The M54975 consists of an 8-bit D-type flip-flop, the output of
which is connected to 8 latches.
When data is applied to the serial data input (S-IN) and a clock
pulse is applied to clock input (T), an “L” to “H” change of the clock
will cause the data input signals to enter the internal shift registers
and the data in the shift registers will be shifted in order.
PIN CONFIGURATION (TOP VIEW)
Clock
Serial input
T1
S-IN 2
Logic GND L-GND 3
VCC 4
Serial output S-OUT 5
Latch input LATCH 6
Enable input
EN 7
Driver GND P-GND 8
16 O1
15 O2
14 O3
13 O4
12 O5
11 O6
10 O7
9 O8
Outline 16P4(P)
16P2N-A(FP)
Parallel outputs
Using a number of M54975 units for bit expansion in series will
entail connecting serial output (S-OUT) to S-IN of the next-stage
M54975.
In parallel output, when the latch input is set to “H” and the output-
control input (enable input EN) is “L”, a clock pulse changing from
“L” to “H” will cause the serial data input signal to appear at output
O1, and the data will be shifted in order at outputs O2 – O8.
The parallel output will yield a signal that is inverted with respect to
the serial data input.
Setting the LATCH input to “L” will prevent data from entering the
latch.
When the EN input is set to “H”, all outputs (O1 – O8) will be set to
OFF. Since the internal logic state of the IC is uncertain at power-
on time, set the EN input to “H” (and outputs O1 – O8 will set to
BLOCK DIAGRAM
Parallel outputs
O1 O2 O3 O4 O5 O6 O7 O8
16 15 14 13 12 11 10
9
Power supply
VCC 4
8 P-GND Driver GND
Enable input
EN 7
Latch input LATCH 6
Serial input S-IN 2
Clock
T1
Q QQQ QQQ Q
LD LD LD LD LD LD LD LD
DQ DQ DQ DQ DQ DQ DQ DQ
TTTTTTTT
3
L-GND
Logic GND
5 S-OUT Serial output

PagesPages 5
Télécharger [ M54975 ]


Fiche technique recommandé

No Description détaillée Fabricant
M54970P 9-Bit Serial Input / Latched Driver Mitsubishi Electric
Mitsubishi Electric
M54972 Bi-CMOS 8-BIT SERIAL-INPUT LATCHED DRIVER Mitsubishi
Mitsubishi
M54972 Bi-CMOS 8-BIT SERIAL-INPUT LATCHED DRIVER Mitsubishi
Mitsubishi
M54974P Bi-CMOS 12-BIT SERIAL-INPUT LATCHED DRIVER Mitsubishi
Mitsubishi

US18650VTC5A

Lithium-Ion Battery

Sony
Sony
TSPC106

PCI Bus Bridge Memory Controller

ATMEL
ATMEL
TP9380

NPN SILICON RF POWER TRANSISTOR

Advanced Semiconductor
Advanced Semiconductor


www.DataSheetWiki.com    |   2020   |   Contactez-nous  |   Recherche