DataSheetWiki


EL1502CM fiches techniques PDF

Elantec - High Power Differential Line Driver/Receiver

Numéro de référence EL1502CM
Description High Power Differential Line Driver/Receiver
Fabricant Elantec 
Logo Elantec 





1 Page

No Preview Available !





EL1502CM fiche technique
EL1502C - Product Brief
High Power Differential Line Driver/Receiver
Features
• Complete ADSL differential driver
and receiver
54VP-P output drive into 100
differential
• 50VP-P output drive into 50
differential
• Driver 2nd/3rd harmonics of
-70dBc/-75dBc at 2VP-P into 100
• Low supply current - 12.5mA per
drive amplifier and 5mA per
receive amplifier
• Standard surface-mount package
Applications
• ADSL line driver
• HDSL2 line driver
• Video distribution amplifier
Ordering Information
Part No
EL1502CM
Package
20-Lead SO
Tape & Reel
Outline #
MDP0027
General Description
The EL1502C is a complete transceiver solution for high speed data
transmission over twisted pair wires. It contains two wideband, high-
voltage drivers and two low-noise receive amplifiers. The EL1502C is
ideally suited for both ADSL and HDSL2 applications, in which it can
supply a 50VP-P signal into a 50differential load while exhibiting
very low distortion. The receive amplifiers also have very low distor-
tion and low-noise for superior reception of small signals.
The line drivers of the EL1502C are current-feedback type amplifiers,
which achieve a high slew rate while consuming moderate power.
They retain their frequency response over a wide range of externally
set gains. The receive amplifiers are of the voltage-feedback type and
can be used to implement a hybrid coupler or filter functions using
external passive components.
The EL1502C operates on ±5V to ±15V supplies. It retains its band-
width and linearity over the complete supply range.
The device is supplied in a standard form factor, 20-pin SOIC pack-
age. The eight center package pins of the package are used as ground
connections and heat spreaders, allowing for operation over the full --
-40°C to +85°C temperature range.
Connection Diagrams
VIN-D1 1
20 VIN-D2
VOUTD1 2
19 VOUTD2
VS- 3
18 VS+
GND* 4
17 GND*
GND* 5
16 GND*
GND* 6
15 GND*
GND* 7
14 GND*
VIN+D1 8
VOUT+R1 9
VIN-R1 10
+
-
13 VIN+D2
+
-
12 VOUT+R2
11 VIN-R2
20-Pin Wide Body SOIC
* Gnd pins are heat spreaders
Note: All information contained in this data sheet has been carefully checked and is believed to be accurate as of the date of publication; however, this data sheet cannot be a “controlled document”. Current revisions, if any, to these
specifications are maintained at the factory and are available upon your request. We recommend checking the revision level before finalization of your design documentation.
© 2001 Elantec Semiconductor, Inc.

PagesPages 2
Télécharger [ EL1502CM ]


Fiche technique recommandé

No Description détaillée Fabricant
EL1502C High Power Differential Line Driver/Receiver Elantec
Elantec
EL1502CM High Power Differential Line Driver/Receiver Elantec
Elantec

US18650VTC5A

Lithium-Ion Battery

Sony
Sony
TSPC106

PCI Bus Bridge Memory Controller

ATMEL
ATMEL
TP9380

NPN SILICON RF POWER TRANSISTOR

Advanced Semiconductor
Advanced Semiconductor


www.DataSheetWiki.com    |   2020   |   Contactez-nous  |   Recherche