DataSheetWiki


FRS140D fiches techniques PDF

Intersil - 17A/ 100V/ 0.145 Ohm/ Rad Hard/ N-Channel Power MOSFETs

Numéro de référence FRS140D
Description 17A/ 100V/ 0.145 Ohm/ Rad Hard/ N-Channel Power MOSFETs
Fabricant Intersil 
Logo Intersil 





1 Page

No Preview Available !





FRS140D fiche technique
June 1998
FRS140D, FRS140R,
FRS140H
17A, 100V, 0.145 Ohm, Rad Hard,
N-Channel Power MOSFETs
Features
• 17A, 100V, RDS(on) = 0.145
• Second Generation Rad Hard MOSFET Results From New Design Concepts
• Gamma
• Gamma Dot
• Photo Current
• Neutron
- Meets Pre-Rad Specifications to 100KRAD(Si)
- Defined End Point Specs at 300KRAD(Si) and 1000KRAD(Si)
- Performance Permits Limited Use to 3000KRAD(Si)
- Survives 3E9RAD(Si)/sec at 80% BVDSS Typically
- Survives 2E12 Typically If Current Limited to IDM
- 3.0nA Per-RAD(Si)/sec Typically
- Pre-RAD Specifications for 3E13 Neutrons/cm2
- Usable to 3E14 Neutrons/cm2
Description
The Intersil Corporation has designed a series of SECOND GENERATION hard-
ened power MOSFETs of both N and P channel enhancement types with ratings
from 100V to 500V, 1A to 60A, and on resistance as low as 25mW. Total dose
hardness is offered at 100K RAD(Si) and 1000KRAD(Si) with neutron hardness
ranging from 1E13n/cm2 for 500V product to 1E14n/cm2 for 100V product. Dose
rate hardness (GAMMA DOT) exists for rates to 1E9 without current limiting and
2E12 with current limiting.
This MOSFET is an enhancement-mode silicon-gate power field effect transistor
of the vertical DMOS (VDMOS) structure. It is specially designed and processed
to exhibit minimal characteristic changes to total dose (GAMMA) and neutron (no)
exposures. Design and processing efforts are also directed to enhance survival to
heavy ion (SEU) and/or dose rate (GAMMA DOT) exposure.
This part may be supplied as a die or in various packages other than shown
above. Reliability screening is available as either non TX (commercial), TX
equivalent of MIL-S-19500, TXV equivalent of MIL-S-19500, or space equiva-
lent of MIL-S-19500. Contact the Intersil High-Reliability Marketing group for
any desired deviations from the data sheet.
Package
TO-257AA
CAUTION: Beryllia Warning per MIL-S-19500
refer to package specifications.
Symbol
Absolute Maximum Ratings (TC = +25oC) Unless Otherwise Specified
Drain-Source Voltage. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . VDS
Drain-Gate Voltage (RGS = 20k). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . VDGR
Continuous Drain Current
TC = +25oC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .ID
TC = +100oC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .ID
Pulsed Drain Current . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . IDM
Gate-Source Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .VGS
Maximum Power Dissipation
TC = +25oC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . PT
TC = +100oC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . PT
Derated Above +25oC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Inductive Current, Clamped, L = 100µH, (See Test Figure). . . . . . . . . . . . . . . . . . . . . . . . . . ILM
Continuous Source Current (Body Diode) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . IS
Pulsed Source Current (Body Diode) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ISM
Operating And Storage Temperature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . TJC, TSTG
Lead Temperature (During Soldering)
Distance > 0.063 in. (1.6mm) From Case, 10s Max. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . TL
CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
http://www.intersil.com or 407-727-9207 | Copyright © Intersil Corporation 1999
4-1
FRS140D, R, H
100
100
17
11
51
±20
75
30
0.60
51
17
51
-55 to +150
300
UNITS
V
V
A
A
A
V
W
W
W/oC
A
A
A
oC
oC
File Number 3254.2

PagesPages 6
Télécharger [ FRS140D ]


Fiche technique recommandé

No Description détaillée Fabricant
FRS140D 17A/ 100V/ 0.145 Ohm/ Rad Hard/ N-Channel Power MOSFETs Intersil
Intersil
FRS140H 17A/ 100V/ 0.145 Ohm/ Rad Hard/ N-Channel Power MOSFETs Intersil
Intersil
FRS140R 17A/ 100V/ 0.145 Ohm/ Rad Hard/ N-Channel Power MOSFETs Intersil
Intersil

US18650VTC5A

Lithium-Ion Battery

Sony
Sony
TSPC106

PCI Bus Bridge Memory Controller

ATMEL
ATMEL
TP9380

NPN SILICON RF POWER TRANSISTOR

Advanced Semiconductor
Advanced Semiconductor


www.DataSheetWiki.com    |   2020   |   Contactez-nous  |   Recherche