|
|
PDF TDA3604Q Data sheet ( Hoja de datos )
| Número de pieza | TDA3604Q | |
| Descripción | Multiple voltage regulators with external reset delay and switch | |
| Fabricantes | NXP Semiconductors | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de TDA3604Q (archivo pdf) en la parte inferior de esta página. Total 20 Páginas | ||
|
No Preview Available !
INTEGRATED CIRCUITS
DATA SHEET
TDA3604Q; TDA3604TH
Multiple voltage regulators with
external reset delay and switch
Product specification
Supersedes data of 1997 Aug 15
File under Integrated Circuits, IC01
1997 Aug 21
1 page  
Philips Semiconductors
Multiple voltage regulators with external
reset delay and switch
Product specification
TDA3604Q; TDA3604TH
PINNING
SYMBOL
n.c.
VI(sw)
VP
REG1
RES
Ven(REG1)
Ven(sw)
VO(ig)
CRES
GND
REG2
VI(ig)
VO(sw)
SOT141-6
1
2
3
4
5
6
7
8
9
10
11
12
13
PIN
SOT418-2
DESCRIPTION
1, 2, 6, 9, 13, 18, 19 and 20 not connected
3 power switch input
4 supply voltage
5 regulator 1 output
7 reset output (+5 V)
8 regulator 1 enable input
10 power switch enable input
11 ignition output
12 reset delay capacitor
14 ground (0 V)
15 regulator 2 output
16 ignition input
17 power switch output
handbook, halfpage
n.c. 1
Vl(sw) 2
VP 3
REG1 4
RES 5
Ven(REG1) 6
Ven(sw) 7 TDA3604Q
V O(ig) 8
C RES 9
GND 10
REG2 11
VI(ig) 12
VO(sw) 13
MBE236
Fig.2 Pin configuration SOT141-6.
handbook, halfpage
n.c. 20
1 n.c.
n.c. 19
2 n.c.
n.c. 18
3 VI(sw)
VO(sw) 17
4 VP
VI(ig) 16
5 REG1
TDA3604TH
REG2 15
6 n.c.
GND 14
7 RES
n.c. 13
CRES 12
VO(ig) 11
8 Ven(REG1)
9 n.c.
10 Ven(sw)
MGK596
Fig.3 Pin configuration SOT418-2.
1997 Aug 21
5
5 Page 
Philips Semiconductors
Multiple voltage regulators with external
reset delay and switch
Product specification
TDA3604Q; TDA3604TH
Notes to the characteristics
1. Minimum operating voltage, only if VP has exceeded 6.5 V.
2. Enable inputs of regulator 1, ignition and power switch are low. Regulator 2 is unloaded.
3. Voltage drop due to load condition.
4. The spread on tracking is one sigma value.
5. Ignition output voltage will be less than or equal to the output voltage of regulator 2.
6. IREG1 = 5 mA unless otherwise specified.
7. The drop-out voltage of regulator 1 is measured between VP and VREG1.
8. At current limit, IREGm is held constant (see Fig.5).
9. The foldback current protection limits the dissipated power at short-circuit (see Figs 5 and 6).
10. The cross talk of regulator 1 is measured with an IREG2 = 0.5 mA up to 30 mA and input frequency of fi = 100 kHz.
11. IREG2 = 5 mA unless otherwise specified.
12. The drop-out voltage of regulator 2 is measured between VP and VREG2.
13. The cross talk of regulator 2 is measured with an IREG1 = 0.5 mA up to 100 mA and input frequency of fi = 100 kHz.
14. The drop-out voltage of the power switch is measured between VI(sw) and VO(sw).
15. The delay time depends on the value of the capacitor: td = C--I- × VthrC = C × 2.5 × 106
1997 Aug 21
11
11 Page | ||
| Páginas | Total 20 Páginas | |
| PDF Descargar | [ Datasheet TDA3604Q.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| TDA3604Q | Multiple voltage regulators with external reset delay and switch | NXP Semiconductors |
| TDA3604TH | Multiple voltage regulators with external reset delay and switch | NXP Semiconductors |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |