DataSheetWiki


TD340D fiches techniques PDF

ST Microelectronics - H-BRIDGE QUAD POWER MOSFET DRIVER FOR DC MOTOR CONTROL

Numéro de référence TD340D
Description H-BRIDGE QUAD POWER MOSFET DRIVER FOR DC MOTOR CONTROL
Fabricant ST Microelectronics 
Logo ST Microelectronics 





1 Page

No Preview Available !





TD340D fiche technique
TD340
H-BRIDGE QUAD POWER MOSFET DRIVER
FOR DC MOTOR CONTROL
s QUAD N-CHANNEL MOSFET DRIVE
s INTEGRATED CHARGE PUMP FOR HIGH
SIDE MOSFET DRIVING
s VERY LOW GROUND EMI NOISE
s MOTOR SPEED AND DIRECTION CON-
TROL (LOW SIDE PWM)
s INTERNAL OR EXTERNAL PWM SOURCE
s 25kHz SWITCHING FREQUENCY ABILITY
s SYNCHRONOUS HIGH SIDE RECTIFICA-
TION
s REVERSED BATTERY ACTIVE PROTEC-
TION ABILITY
s INTEGRATED 5V POWER SUPPLY FOR
MICROCONTROLLER
s INTEGRATED SECURITY CIRCUITS:
UVLO, OVLO, WATCHDOG
s 60V MAX RATING
DESCRIPTION
The TD340 integrated circuit allows N-Channel
Power Mosfets driving in a full H-bridge
configuration and is best suited for DC Motor
Control Applications. The four drivers outputs are
designed to allow 25kHz MOSFET switching.
The speed and direction of the motor are to be set
by two pins. Voltage across the motor is controlled
by low side Pulse Width Modulation (PWM). This
PWM feature can be made internally when the
input pin is connected to an analog signal, or it can
be given directly from a digital source.
An internal charge pump allows proper upper
MOS driving for full static operation (100% PWM).
TD340 achieves very low EMI noise thanks to its
balanced charge pump structure and its drivers
moderate slew rate.
To avoid excessive heating due to free wheeling,
appropriate synchronous rectification is achieved
on the corresponding High Side MOSFET.
Moreover, TD340 integrates a 5V voltage
regulator suitable as a power supply output for the
microcontroller, a Reset circuit and a Watchdog
circuit.
Security functions disable the TD340 (MOS off)
when abnormal conditions occur like overvoltage,
undervoltage or CPU loss of control (watchdog).
TD340 withstands transients as met in automotive
field without special protection devices thanks to
its 60V BCD technology.
PRELIMINARY DATA
D
SO20
(Plastic Micropackage)
ORDER CODE
Part Number Temperature Range
TD340ID
-40°C, +125°C
Package
D
D = Small Outline Package (SO) - also available in Tape & Reel (DT)
PIN CONNECTIONS (top view)
VBATT 1
VOUT 2
RESET 3
CWD 4
WD 5
STBY 6
TEMP 7
IN1 8
IN2 9
CF 10
20 OSC
19 CB1
18 H1
17 S1
16 CB2
15 H2
14 S2
13 L2
12 L1
11 GND
May 2000
1/21
This is preliminary information on a new product now in development or undergoing evaluation. Details are subject to change without notice.

PagesPages 21
Télécharger [ TD340D ]


Fiche technique recommandé

No Description détaillée Fabricant
TD340 H-BRIDGE QUAD POWER MOSFET DRIVER FOR DC MOTOR CONTROL ST Microelectronics
ST Microelectronics
TD3400 High performance vector control inverter for injection molding machine User manual EMERSON
EMERSON
TD34063 DC TO DC CONVERTER CONTROLLER TMC
TMC
TD34063 1.5A STEP-DOWN/STEP-UP/INVERTING DC-DC CONVERTER Techcode
Techcode

US18650VTC5A

Lithium-Ion Battery

Sony
Sony
TSPC106

PCI Bus Bridge Memory Controller

ATMEL
ATMEL
TP9380

NPN SILICON RF POWER TRANSISTOR

Advanced Semiconductor
Advanced Semiconductor


www.DataSheetWiki.com    |   2020   |   Contactez-nous  |   Recherche