DataSheetWiki


TCL1117-5.00 fiches techniques PDF

TelCom Semiconductor - 800mA LOW DROPOUT POSITIVE REGULATORS ADJUSTABLE AND FIXED 2.85V/ 3.30V/ 5.00V

Numéro de référence TCL1117-5.00
Description 800mA LOW DROPOUT POSITIVE REGULATORS ADJUSTABLE AND FIXED 2.85V/ 3.30V/ 5.00V
Fabricant TelCom Semiconductor 
Logo TelCom Semiconductor 





1 Page

No Preview Available !





TCL1117-5.00 fiche technique
800mA LOW DROPOUT POSITIVE REGULATORS
ADJUSTABLE AND FIXED 2.85V, 3.30V, 5.00V
PRELIMINARY INFORMATION
TTCCLL11111177
TCTCLL11111177--22..8855
TCTCLL11111177--33..30
TCTCLL11111177--55..00
800mA LOW DROPOUT POSITIVE REGULATORS
ADJUSTABLE AND FIXED 2.85V, 3.30V, 5.00V
FEATURES
s Space-saving SOT-223 Package
s Pin Compatible with Older Adjustable 3 Terminal
Regulators
s Adjustable or Fixed Voltages of 2.85V, 3.30V or 5.00V
s High Output Current ..................................... 800mA
s Low Dropout Voltage ............ 1.2V at IOUT = 800mA
s Guaranteed Dropout Voltage at Multiple Current
Levels
s Line Regulation (Max) ...................................... 0.2%
s Load Regulation (Max) ..................................... 0.4%
APPLICATIONS
s Active SCSI Terminators
s High Efficiency Linear Regulators
s Post Regulators for Switching Supplies
s Battery Chargers
s 5V - 3.3V Linear Regulators
ORDERING INFORMATION
Part Number*
Package
Part Marking
TCL1117-ADJCDB
SOT-223-3
1117
TCL1117-2.85CDB
SOT-223-3
11172
TCL1117-3.30CDB
SOT-223-3
11173
TCL1117-5.00CDB
SOT-223-3
11175
TCL1117-ADJCEB
DDPAK-3
TCL1117-2.85CEB
DDPAK-3
TCL1117-3.30CEB
DDPAK-3
TCL1117-5.00CEB
DDPAK-3
*Ambient temperature range is determined by maximum operating
power dissipation and a maximum die temperature of 125°C (see Power
Dissipation and Thermal Design Section).
TYPICAL APPLICATION
GENERAL DESCRIPTION
The TCL1117 is a low-dropout positive voltage regula-
tor (LDO) with 800mA output current capability. It is available
in fixed and adjustable output voltage versions, 2.85V (ac-
tive SCSI terminators), 3.30V and 5.00V. Output/reference
voltage accuracy is guaranteed to ±1.0%. Over-current
protection is integrated onto the chip. Dropout is specified
at 1.2V maximum at full rated output current and less than
1.0V at low loads (<100mA). The SOT-223 package makes
the TCL1117 especially attractive for tight physical layouts.
For stability, a 10µF output capacitor is required. The
TCL1117 is an NPN-based design which has significantly
lower unused quiescent current than similar PNP-based
regulators.
PIN CONFIGURATIONS
SOT-223
3-Lead Package
FRONT VIEW
DDPAK-3
FRONT VIEW
TAB IS VOUT
IN
OUT
ADJ/GND
123
4.75V to 5.25V
IN
10µF
TCL1117-5.00 OUT
GND
22µF
110
110
110
18 to 27
LINES
Active Terminator for SCSI-2 Bus
TCL1117-05 6/5/97 TelCom Semiconductor reserves the right to make changes in the circuitry an1d specifications of its devices.

PagesPages 9
Télécharger [ TCL1117-5.00 ]


Fiche technique recommandé

No Description détaillée Fabricant
TCL1117-5.00 800mA LOW DROPOUT POSITIVE REGULATORS ADJUSTABLE AND FIXED 2.85V/ 3.30V/ 5.00V TelCom Semiconductor
TelCom Semiconductor
TCL1117-5.00CDB 800mA LOW DROPOUT POSITIVE REGULATORS ADJUSTABLE AND FIXED 2.85V/ 3.30V/ 5.00V TelCom Semiconductor
TelCom Semiconductor
TCL1117-5.00CEB 800mA LOW DROPOUT POSITIVE REGULATORS ADJUSTABLE AND FIXED 2.85V/ 3.30V/ 5.00V TelCom Semiconductor
TelCom Semiconductor

US18650VTC5A

Lithium-Ion Battery

Sony
Sony
TSPC106

PCI Bus Bridge Memory Controller

ATMEL
ATMEL
TP9380

NPN SILICON RF POWER TRANSISTOR

Advanced Semiconductor
Advanced Semiconductor


www.DataSheetWiki.com    |   2020   |   Contactez-nous  |   Recherche