DataSheet39.com

What is TC9020?

This electronic component, produced by the manufacturer "ETC", performs the same function as "Gigabit Ethernet Controller".


TC9020 Datasheet PDF - ETC

Part Number TC9020
Description Gigabit Ethernet Controller
Manufacturers ETC 
Logo ETC Logo 


There is a preview and TC9020 download ( pdf file ) link at the bottom of this page.





Total 2 Pages



Preview 1 page

No Preview Available ! TC9020 datasheet, circuit

TC9021/TC9020 GGiiggaabbiitt EEtthheerrnneett CCoonnttrroolllleerr

Features
IEEE 802.3z compliant MAC supporting full wire speed
at 1Gbps
1000Mbps, 100Mbps, and 10Mbps triple speed support
GMII, MII or TBI interface with integrated 1000BASE-X
PCS with Auto-Negotiation
Half duplex carrier extension and packet bursting
Scatter/gather DMA capable of 1Gbps transaction
32/64-bit PCI bus support--- TC9021
32-bit PCI bus support --- TC9020
TCP/UDP/IP checksum offloading
Minimize interrupts
Supports “interrupt-less” transmit operation
Support for IEEE 802.1p prioritizing via priority queuing
and interrupts
Extensive IEEE 802.1Q VLAN support
Jumbo frame support
Provides a variety of flexible receive filtering modes,
including VLAN, IP multicast, and hash table
Flash ROM interface for remote network boot
ACPI and wake On LAN support
Windows NT 4.0, Windows 9x, Windows 2000, Novell
Netware 4.x/5.x, Linux 2.x
Low power 2.5/3.3V CMOS design with 5V tolerant I/O
0.25um CMOS technology
208-pin PQFP
Functional Description
The TC9021/TC9020 is part of a new generation of high performance, host-optimized network interface cards
designed for mission critical systems such as servers and high-end workstations. Offering two gigabits per second of
aggregate bandwidth, the TC9021/TC9020 optimizes performance while minimizing network overhead on the host
system. Compared to leading Fast Ethernet solutions, the TC9021/TC9020 transfers data at less than one tenth of
the host CPU utilization rate.
IEEE 802.3z Gigabit Ethernet MAC
The TC9021/TC9020 implements IEEE 802.3z half duplex functions such as Carrier Extension and Packet Bursting.
In full duplex mode, the TC9021/TC9020 implements both symmetrical and asymmetrical flow control via IEEE
802.3x PAUSE MAC Control frames. PAUSE frames can be automatically generated by the TC9021/TC9020
according to programmable flow control thresholds within the on-chip receive FIFO. The TC9021/TC9020 MAC has
been carefully implemented to ensure full wire speed at 1Gbps with 96-bit transmit and 64-bit receive inter-frame
spacing.
GMII, MII and TBI Interface
The TC9021/TC9020 implements both a GMII and MII interface, which offers a simple, cost-effective migration from
Fast Ethernet networks to high-speed Gigabit Ethernet networks over existing Category 5 cabling. For fiber optics
applications, the TC9021/TC9020 implements an IEEE 802.3z 1000BASE-X Physical Coding Sublayer (PCS). The
PCS includes an 8B10B encoder and decoder, Auto-negotiation, and Ten Bit Interface (TBI). With the industry
standard SERDES devices, the TC9021/TC9020 allows for gigabit optical link connections to the host system.
32/64-bit, 33/66MHz PCI Bus
The only one difference between the TC9021 and the TC9020 is the PCI bus width. The TC9020 can only be used in
32-bit PCI bus and The TC9021can be directly interface to either 32-bit or 64-bit bus. Advanced PCI commands, such
as Write and Invalidate, Read Line, and Read Multiple, are also implemented to further improve system
performance.
Bus Master Dual Channel DMA
The TC9021/TC9020 implements independent scatter/gather DMA engines to support full duplex Gigabit Ethernet
connectivity. These two DMA engines are capable of accessing data on any byte boundary and moving data to and
from discontiguous memory locations. This capability eliminates CPU-intensive data copying. Furthermore, each
DMA engine has been carefully designed to sustain well over 1 gigabit per second of throughput across a PCI bus.
This ensures that the TC9021/TC9020 will not be a bottleneck in high performance data networking applications.
Protocol Offloading
The TC9021/TC9020 also off-loads network protocol tasks from the host CPU. It generates TCP, UDP and IP
checksum values for outgoing frames and verifies the checksum value on incoming frames. Ethernet MAC frame CRC
calculation is also implemented on-chip.
website:www.tmi.com.tw


Part Details

On this page, you can learn information such as the schematic, equivalent, pinout, replacement, circuit, and manual for TC9020 electronic component.


Information Total 2 Pages
Link URL [ Copy URL to Clipboard ]
Download [ TC9020.PDF Datasheet ]

Share Link :

Electronic Components Distributor


An electronic components distributor is a company that sources, stocks, and sells electronic components to manufacturers, engineers, and hobbyists.


SparkFun Electronics Allied Electronics DigiKey Electronics Arrow Electronics
Mouser Electronics Adafruit Newark Chip One Stop


Featured Datasheets

Part NumberDescriptionMFRS
TC9020The function is Gigabit Ethernet Controller. ETCETC
TC9021The function is Gigabit Ethernet Controller. ETCETC
TC9028AFThe function is INFRARED REMOTE CONTROL TRANSMITTING CMOS LSI WITH MICROCONTROLLING. ToshibaToshiba

Semiconductors commonly used in industry:

1N4148   |   BAW56   |   1N5400   |   NE555   |  

LM324   |   BC327   |   IRF840  |   2N3904   |  



Quick jump to:

TC90     1N4     2N2     2SA     2SC     74H     BC     HCF     IRF     KA    

LA     LM     MC     NE     ST     STK     TDA     TL     UA    



Privacy Policy   |    Contact Us     |    New    |    Search