DataSheetWiki


74LCX574 fiches techniques PDF

ST Microelectronics - OCTAL D-TYPE FLIP FLOP NON-INVERTING (3-STATE) WITH 5V TOLERANT INPUTS AND OUTPUTS

Numéro de référence 74LCX574
Description OCTAL D-TYPE FLIP FLOP NON-INVERTING (3-STATE) WITH 5V TOLERANT INPUTS AND OUTPUTS
Fabricant ST Microelectronics 
Logo ST Microelectronics 





1 Page

No Preview Available !





74LCX574 fiche technique
74LCX574
OCTAL D-TYPE FLIP FLOP NON-INVERTING (3-STATE)
WITH 5V TOLERANT INPUTS AND OUTPUTS
s 5V TOLERANT INPUTS AND OUTPUTS
s HIGH SPEED:
fMAX = 150 MHz (MIN.) at VCC = 3V
s POWER DOWN PROTECTION ON INPUTS
AND OUTPUTS
s SYMMETRICAL OUTPUT IMPEDANCE:
|IOH| = IOL = 24mA (MIN) at VCC = 3V
s PCI BUS LEVELS GUARANTEED AT 24 mA
SOP
TSSOP
s BALANCED PROPAGATION DELAYS:
tPLH tPHL
s OPERATING VOLTAGE RANGE:
VCC(OPR) = 2.0V to 3.6V (1.5V Data
Retention)
s PIN AND FUNCTION COMPATIBLE WITH
74 SERIES 574
Table 1: Order Codes
PACKAGE
SOP
TSSOP
T&R
74LCX574MTR
74LCX574TTR
s LATCH-UP PERFORMANCE EXCEEDS
500mA (JESD 17)
s ESD PERFORMANCE:
HBM > 2000V (MIL STD 883 method 3015);
MM > 200V
DESCRIPTION
The 74LCX574 is a low voltage CMOS OCTAL
D-TYPE FLIP FLOP with 3 STATE OUTPUT
NON-INVERTING fabricated with sub-micron
silicon gate and double-layer metal wiring C2MOS
technology. It is ideal for low power and high
speed 3.3V applications; it can be interfaced to 5V
signal environment for both inputs and outputs.
These 8 bit D-Type flip-flops are controlled by a
clock input (CK) and an output enable input (OE).
On the positive transition of the clock, the Q
outputs will be set to the logic state that were
setup at the D inputs.
While the (OE) input is low, the 8 outputs will be in
a normal logic state (high or low logic level) and
while high level the outputs will be in a high
impedance state.
The Output control does not affect the internal
operation of flip flops; that is, the old data can be
retained or the new data can be entered even
while the outputs are off.
It has same speed performance at 3.3V than 5V
AC/ACT family, combined with a lower power
consumption.
All inputs and outputs are equipped with
protection circuits against static discharge, giving
them 2KV ESD immunity and transient excess
voltage.
Figure 1: Pin Connection And IEC Logic Symbols
September 2004
Rev. 5
1/13

PagesPages 13
Télécharger [ 74LCX574 ]


Fiche technique recommandé

No Description détaillée Fabricant
74LCX573 Low Voltage Octal Latch with 5V Tolerant Inputs and Outputs Fairchild Semiconductor
Fairchild Semiconductor
74LCX573MSA Low Voltage Octal Latch with 5V Tolerant Inputs and Outputs Fairchild Semiconductor
Fairchild Semiconductor
74LCX573MTC Low Voltage Octal Latch with 5V Tolerant Inputs and Outputs Fairchild Semiconductor
Fairchild Semiconductor
74LCX573SJ Low Voltage Octal Latch with 5V Tolerant Inputs and Outputs Fairchild Semiconductor
Fairchild Semiconductor

US18650VTC5A

Lithium-Ion Battery

Sony
Sony
TSPC106

PCI Bus Bridge Memory Controller

ATMEL
ATMEL
TP9380

NPN SILICON RF POWER TRANSISTOR

Advanced Semiconductor
Advanced Semiconductor


www.DataSheetWiki.com    |   2020   |   Contactez-nous  |   Recherche