DataSheetWiki


IDT74FCT157CTE fiches techniques PDF

Integrated Device Tech - FAST CMOS QUAD 2-INPUT MULTIPLEXER

Numéro de référence IDT74FCT157CTE
Description FAST CMOS QUAD 2-INPUT MULTIPLEXER
Fabricant Integrated Device Tech 
Logo Integrated Device Tech 





1 Page

No Preview Available !





IDT74FCT157CTE fiche technique
Integrated Device Technology, Inc.
FAST CMOS
QUAD 2-INPUT
MULTIPLEXER
IDT54/74FCT157T/AT/CT/DT
IDT54/74FCT257T/AT/CT/DT
IDT54/74FCT2257T/AT/CT
FEATURES:
• Common features:
– Low input and output leakage 1µA (max.)
– CMOS power levels
– True TTL input and output compatibility
– VOH = 3.3V (typ.)
– VOL = 0.3V (typ.)
– Meets or exceeds JEDEC standard 18 specifications
– Product available in Radiation Tolerant and Radiation
Enhanced versions
– Military product compliant to MIL-STD-883, Class B
and DESC listed (dual marked)
– Available in DIP, SOIC, SSOP, QSOP, CERPACK
and LCC packages
• Features for FCT157T/257T:
– Std., A, C and D speed grades
– High drive outputs (-15mA IOH, 48mA IOL)
• Features for FCT2257T:
– Std., A, and C speed grades
– Resistor outputs (-15mA IOH, 12mA IOL Com.)
(-12mA IOH, 12mA IOL Mil.)
– Reduced system switching noise
FUNCTIONAL BLOCK DIAGRAM
DESCRIPTION:
The FCT157T, FCT257T/FCT2257T are high-speed quad
2-input multiplexers built using an advanced dual metal CMOS
technology. Four bits of data from two sources can be
selected using the common select input. The four buffered
outputs present the selected data in the true (non-inverting)
form.
The FCT157T has a common, active-LOW, enable input.
When the enable input is not active, all four outputs are held
LOW. A common application of ‘FCT157T is to move data
from two different groups of registers to a common bus.
Another application is as a function generator. The ‘FCT157T
can generate any four of the 16 different functions of two
variables with one variable common.
The FCT257T/FCT2257T have a common Output Enable
(OE) input. When OE is HIGH, all outputs are switched to a
high-impedance state allowing the outputs to interface directly
with bus-oriented systems.
The FCT2257T has balanced output drive with current
limiting resistors. This offers low ground bounce, minimal
undershoot and controlled output fall times-reducing the need
for external series terminating resistors. FCT2xxxT parts are
plug-in replacements for FCTxxxT parts.
PIN CONFIGURATIONS
S
157 Only E
I1B –I1D
I0B –I0D
3 other multiplexers
Z B–Z D
S
I0A
I1A
ZA
I0B
I1B
ZB
GND
1 16
2 15
3
P16-1,
D16-1,
14
4 SO16-1, 13
5 SO16-7 12
6 & 11
7 E16-1 10
89
Vcc
E or OE*
I0C
I1C
ZC
I0D
I 1D
ZD
DIP/SOIC/QSOP/CERPACK
TOP VIEW
2537 drw 02
I1A
I0A
257 Only OE
ZA
2537 drw 01
INDEX
3 2 20 19
I1A 4
1 18 I0C
ZA 5 L20-2 17 I1C
NC 6
16 NC
I0B 7
15 ZC
I1B 8
14 I0D
9 10 11 12 13
The IDT logo is a registered trademark of Integrated Device Technology, Inc.
MILITARY AND COMMERCIAL TEMPERATURE RANGES
LCC
TOP VIEW
* E for FCT157, OE for FCT257/FCT2257.
©1996 Integrated Device Technology, Inc.
6.6
2537 drw 03
JUNE 1996
2537/6
1

PagesPages 7
Télécharger [ IDT74FCT157CTE ]


Fiche technique recommandé

No Description détaillée Fabricant
IDT74FCT157CT FAST CMOS QUAD 2-INPUT MULTIPLEXER Integrated Device Tech
Integrated Device Tech
IDT74FCT157CTD FAST CMOS QUAD 2-INPUT MULTIPLEXER Integrated Device Tech
Integrated Device Tech
IDT74FCT157CTDB FAST CMOS QUAD 2-INPUT MULTIPLEXER Integrated Device Tech
Integrated Device Tech
IDT74FCT157CTE FAST CMOS QUAD 2-INPUT MULTIPLEXER Integrated Device Tech
Integrated Device Tech

US18650VTC5A

Lithium-Ion Battery

Sony
Sony
TSPC106

PCI Bus Bridge Memory Controller

ATMEL
ATMEL
TP9380

NPN SILICON RF POWER TRANSISTOR

Advanced Semiconductor
Advanced Semiconductor


www.DataSheetWiki.com    |   2020   |   Contactez-nous  |   Recherche