DataSheetWiki


UPD17207GF fiches techniques PDF

NEC - 4-BIT SINGLE-CHIP MICROCONTROLLER WITH LCD CONTROLLER/DRIVER AND A/D CONVERTER FOR INFRARED REMOTE CONTROL TRANSMITTERS

Numéro de référence UPD17207GF
Description 4-BIT SINGLE-CHIP MICROCONTROLLER WITH LCD CONTROLLER/DRIVER AND A/D CONVERTER FOR INFRARED REMOTE CONTROL TRANSMITTERS
Fabricant NEC 
Logo NEC 





1 Page

No Preview Available !





UPD17207GF fiche technique
DATA SHEET
MOS INTEGRATED CIRCUIT
µPD17201A, 17207
4-BIT SINGLE-CHIP MICROCONTROLLER WITH
LCD CONTROLLER/DRIVER AND A/D CONVERTER
FOR INFRARED REMOTE CONTROL TRANSMITTERS
DESCRIPTION
The µPD17201A, 17207 is a 4-bit single-chip microcontroller, used for infrared remote control transmitters, which
in-tegrates an LCD controller/driver, A/D converter, and remote controller carrier generator circuit on a single chip.
For the CPU, this microcontroller employs the 17K architecture of the general-purpose register method, and it can
directly execute operations between data memory addresses which would have been conventionally executed by an
accumulator. In addition, all the instructions are 16-bit, 1-word instructions, enabling efficient programming.
A one-time PROM model, µPD17P207, to which data can be written only once is also available. This one-time
PROM model is useful for program evaluation of the µPD17201A or 17207.
Detalied functionins are described in the following manual. Be sure to read this manual when designing
your system.
µPD172xx Subseries User’s Manual: IEU-1317
FEATURES
• 17K architecture
: General-purpose register method
• Program memory (ROM)
: 3072 x 16 bits (µPD17201A)
4096 x 16 bits (µPD17207)
• Data memory (RAM)
: 336 x 4 bits (including LCD register 36 × 4 bits)
• Infrared remote controller carrier generator (REM output)
• LCD controller/driver
: Up to 136 segments can be displayed
· Common pins
: 4 (2 can be used as segment pins)
· Segment pins
: 34
· Voltage booster circuit for driving LCD : LCD drive voltage can be adjusted from 2.4 to 5.4 V with external
resistor
• 8-bit A/D converter
: 4 channels (successive approximation method in software)
• 8-bit timer
: 1 channel
• Watch timer/watchdog timer
: 1 channel (WDOUT output)
• 3-line serial interface
: 1 channel
• External interrupt pin (INT)
:1
• I/O pin
: 20 (including INT)
• Instruction execution time
: 4 µs (main clock: fX = 4 MHz)
488 µs (subclock: fXT = 32.768 kHz)
• Supply voltage
: VDD = 2.2 to 5.5 V (main clock : fX = 4 MHz)
: VDD = 2.0 to 5.5 V (subclock : fXT = 32.768 kHz)
Unless otherwise specified, the µPD17207 is treated as the representative model throughout this documents.
The information in this document is subject to change without notice.
Document No. U11778EJ5V0DS00 (5th edition)
(Previous No. IC-2773)
Date Published November 1996 P
Printed in Japan
The mark shows major revised points.
©
1991

PagesPages 30
Télécharger [ UPD17207GF ]


Fiche technique recommandé

No Description détaillée Fabricant
UPD17207GF 4-BIT SINGLE-CHIP MICROCONTROLLER WITH LCD CONTROLLER/DRIVER AND A/D CONVERTER FOR INFRARED REMOTE CONTROL TRANSMITTERS NEC
NEC

US18650VTC5A

Lithium-Ion Battery

Sony
Sony
TSPC106

PCI Bus Bridge Memory Controller

ATMEL
ATMEL
TP9380

NPN SILICON RF POWER TRANSISTOR

Advanced Semiconductor
Advanced Semiconductor


www.DataSheetWiki.com    |   2020   |   Contactez-nous  |   Recherche