DataSheet.es    


PDF UPD17010 Data sheet ( Hoja de datos )

Número de pieza UPD17010
Descripción 4-BIT SINGLE-CHIP MICROCONTROLLER WITH HARDWARE DEDICATED TO DIGITAL TUNING SYSTEM
Fabricantes NEC 
Logotipo NEC Logotipo



Hay una vista previa y un enlace de descarga de UPD17010 (archivo pdf) en la parte inferior de esta página.


Total 30 Páginas

No Preview Available ! UPD17010 Hoja de datos, Descripción, Manual

DATA SHEET
MOS INTEGRATED CIRCUIT
µ PD17010
4-BIT SINGLE-CHIP MICROCONTROLLER
WITH HARDWARE DEDICATED TO DIGITAL TUNING SYSTEM
The µPD17010 is a 4-bit single-chip CMOS microcontroller containing hardware for digital tuning systems.
The CPU uses a 17K architecture and can directly manipulate the data memory and control various operations
and peripheral hardware with a single instruction. All instructions are 16-bit 1-word instructions.
As the peripheral hardware, a prescaler for digital tuning that operates at up to 150 MHz, PLL frequency
synthesizer, and frequency counter, as well as many I/O ports, LCD controller/driver, 12-bit timer, A/D converter,
D/A converter (PWM output), clock generator port are provided.
Therefore, a high-performance digital tuning system with sophisticated functions can be configured with a
single chip. The µPD17P010 is available as a one-time PROM model of the µPD17010. This one-time PROM
model can be used for evaluation of the program of the µPD17010 and small-scale production of the application
system.
FEATURES
17K architecture: General-purpose register
system
Program memory (ROM)
16K bytes (7932 × 16 bits)
General-purpose data memory (RAM)
432 × 4 bits
Instruction execution time
4.44 µs (with 4.5-MHz crystal resonator)
Decimal operation
Table reference
Hardware for PLL frequency synthesizer
Dual modulus prescaler (150 MHz MAX.),
programmable divider, phase comparator,
charge pump
A variety of peripheral hardware
General-purpose I/O ports, LCD controller/driver,
serial interface, 12-bit timer, A/D converter, D/A
converter (PWM output), clock generator port,
frequency counter
Many interrupts
External: 1
Internal: 4
External/internal (multiplexed): 1
Power-ON reset, reset by CE pin, and power failure
detection circuit
Low power-dissipation CMOS
Supply voltage: 5 V±10 %
The information in this document is subject to change without notice.
Document No. U10340EJ2V0DS00 (2nd edition)
(Previous No. ID-2878)
Date Published October 1995 P
Printed in Japan
©
1991

1 page




UPD17010 pdf
µPD17010
PIN NAME
ADC0-ADC5 :
AMIFC
:
CE :
CGP
:
COM0, COM1 :
EO0, EO1
:
FCG
:
FMIFC
:
GND
:
INT0, INT1 :
KS0-KS15
:
LCD0-LCD29 :
NC :
P0A0-P0A3 :
P0B0-P0B3 :
P0C0-P0C3 :
P0D0-P0D3 :
P0E0-P0E3 :
A/D converter input
AM intermediate frequency counter input
Chip enable input
Clock generator port
LCD common signal output
Error out output
Frequency count input for external gate
FM intermediate frequency counter input
Ground
External interrupt input
Key source signal output
LCD segment signal output
No connection
Port 0A
Port 0B
Port 0C
Port 0D
Port 0E
P0F0-P0F3 :
P0X0-P0X5 :
P0Y0-P0Y15 :
P1A0-P1A3 :
P1B0-P1B3 :
P1C0-P1C3 :
P1D0-P1D3 :
P2A0
:
PWM0-PWM2 :
SCK0, SCK1 :
SCL :
SDA
:
SI0, SI1
:
SO0, SO1
:
VCOH
:
VCOL
:
VDD1, VDD2 :
XIN, XOUT
:
Port 0F
Port 0X
Port 0Y
Port 1A
Port 1B
Port 1C
Port 1D
Port 2A
D/A converter output
Serial clock I/O
Serial clock I/O
Serial data I/O
Serial data input
Serial data output
Local oscillation input
Local oscillation input
Power supply
Crystal resonator connection
5

5 Page





UPD17010 arduino
µPD17010
22.4 Output Timing Control Block and Segment/Port Select Block ....................................................... 382
22.5 Key Input Block ................................................................................................................................... 386
22.6 Using Key Source Controller/Decoder .............................................................................................. 389
22.7 Reset Status ........................................................................................................................................ 397
23. µPD17010 INSTRUCTION ............................................................................................................. 398
23.1 Instruction Set ..................................................................................................................................... 398
23.2 Instruction List .................................................................................................................................... 399
23.3 Assembler (AS17K) Embedded Macro Instructions ........................................................................ 401
24. µPD17010 RESERVED WORDS ................................................................................................... 402
24.1 Reserved Word List ............................................................................................................................ 402
25. ELECTRICAL SPECIFICATIONS ................................................................................................. 409
26. PACKAGE .................................................................................................................................... 413
27. RECOMMENDED SOLDERING CONDITIONS ............................................................................ 415
APPENDIX A. NOTES ON CONNECTING CRYSTAL RESONATOR ................................................ 416
APPENDIX B. DIFFERENCES AMONG µPD17010, µPD17003A, AND µPD17005 .......................... 417
APPENDIX C. DEVELOPMENT TOOLS ............................................................................................ 420
11

11 Page







PáginasTotal 30 Páginas
PDF Descargar[ Datasheet UPD17010.PDF ]




Hoja de datos destacado

Número de piezaDescripciónFabricantes
UPD170104-BIT SINGLE-CHIP MICROCONTROLLER WITH HARDWARE DEDICATED TO DIGITAL TUNING SYSTEMNEC
NEC
UPD17012PLL FREQUENCY SYNTHESIZER AND CONTROLLER FOR FM/MW/LW TUNER AUTOMOBILE APPLICATIONNEC
NEC
UPD17012GF-058PLL FREQUENCY SYNTHESIZER AND CONTROLLER FOR FM/MW/LW TUNER AUTOMOBILE APPLICATIONNEC
NEC
UPD17012GF-058-3BEPLL FREQUENCY SYNTHESIZER AND CONTROLLER FOR FM/MW/LW TUNER AUTOMOBILE APPLICATIONNEC
NEC

Número de piezaDescripciónFabricantes
SLA6805M

High Voltage 3 phase Motor Driver IC.

Sanken
Sanken
SDC1742

12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters.

Analog Devices
Analog Devices


DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares,
permitiéndote verlos en linea o descargarlos en PDF.


DataSheet.es    |   2020   |  Privacy Policy  |  Contacto  |  Buscar