DataSheetWiki


UPC8130TA fiches techniques PDF

NEC - -15 dBm INPUT/ VARIABLE GAIN AMPLIFIER SILICON MMIC FOR TRANSMITTER AGC OF DIGITAL CELLULAR TELEPHONE

Numéro de référence UPC8130TA
Description -15 dBm INPUT/ VARIABLE GAIN AMPLIFIER SILICON MMIC FOR TRANSMITTER AGC OF DIGITAL CELLULAR TELEPHONE
Fabricant NEC 
Logo NEC 





1 Page

No Preview Available !





UPC8130TA fiche technique
DATA SHEET
BIPOLAR ANALOG INTEGRATED CIRCUITS
µPC8130TA, µPC8131TA
–15 dBm INPUT, VARIABLE GAIN AMPLIFIER SILICON MMIC
FOR TRANSMITTER AGC OF DIGITAL CELLULAR TELEPHONE
DESCRIPTION
The µPC8130TA and µPC8131TA are silicon monolithic integrated circuits designed as variable gain amplifier.
Due to 800 MHz to 1.5 GHz operation, these ICs are suitable for RF transmitter AGC stage of digital cellular
telephone. These ICs are lower distortion than conventional µPC8119T and µPC8120T so that –15 dBm input level
can be applied. These ICs also available in two types of gain control so you can choose either IC in accordance with
your system design. 3 V supply voltage and minimold package contribute to make your system lower voltage,
decreased space and fewer components.
The µPC8130TA and µPC8131TA are manufactured using NEC’s 20 GHz fT NESAT™III silicon bipolar process.
This process uses silicon nitride passivation film and gold electrodes. These materials can protect chip surface from
external pollution and prevent corrosion/migration. Thus, this IC has excellent performance, uniformity and reliability.
FEATURES
• Recommended operating frequency: f = 800 MHz to 1.5 GHz
• Low distortion
: Padj –60 dBc MAX. @Pin = –15 dBm, f = ±50 kHz, VCC = 3.0 V,
TA = +25 °C
• Supply voltage
: VCC = 2.7 to 3.3 V
• Low current consumption
: ICC = 11 mA TYP. @VCC = 3.0 V
• Gain control voltage
: VAGC = 0 to 2.4 V (recommended)
• Two types of gain control
: µPC8130TA = VAGC up vs. Gain up (Reverse control)
µPC8131TA = VAGC up vs. Gain down (Forward control)
• AGC control can be constructed by external control circuit.
• High-density surface mounting : 6 pin minimold package
APPLICATION
• 800 MHz to 900 MHz or 1.5 GHz Digital cellular telephone (PDC800M, PDC1.5G and so on)
ORDERING INFORMATION
Part Number
µPC8130TA-E3
µPC8131TA-E3
Package
6-pin minimold
Marking
C2Q
C2R
Supplying Form
Embossed tape 8 mm wide.
1, 2, 3 pins face to perforation side of the tape.
Qty 3 kp/reel.
Gain Control Type
Reverse control
Forward control
Remark To order evaluation samples, please contact your local NEC sales office.
(Part number for sample order: µPC8130TA, µPC8131TA)
Caution Electro-static sensitive devices.
The information in this document is subject to change without notice.
Document No. P11721EJ2V0DS00 (2nd edition)
Date Published October 1998 N CP(K)
Printed in Japan
The mark shows major revised points.
©
1997

PagesPages 30
Télécharger [ UPC8130TA ]


Fiche technique recommandé

No Description détaillée Fabricant
UPC8130TA -15 dBm INPUT/ VARIABLE GAIN AMPLIFIER SILICON MMIC FOR TRANSMITTER AGC OF DIGITAL CELLULAR TELEPHONE NEC
NEC
UPC8130TA VARIABLE GAIN AMPLIFIER SILICON MMIC FOR TRANSMITTER AGC OF DIGITAL CELLULAR TELEPHONE NEC
NEC
UPC8130TA-E3 -15 dBm INPUT/ VARIABLE GAIN AMPLIFIER SILICON MMIC FOR TRANSMITTER AGC OF DIGITAL CELLULAR TELEPHONE NEC
NEC

US18650VTC5A

Lithium-Ion Battery

Sony
Sony
TSPC106

PCI Bus Bridge Memory Controller

ATMEL
ATMEL
TP9380

NPN SILICON RF POWER TRANSISTOR

Advanced Semiconductor
Advanced Semiconductor


www.DataSheetWiki.com    |   2020   |   Contactez-nous  |   Recherche