DataSheetWiki


UPC8112TB-E3 fiches techniques PDF

NEC - SILICON MMIC 1st FREQUENCY DOWN-CONVERTER FOR CELLULAR/CORDLESS TELEPHONE

Numéro de référence UPC8112TB-E3
Description SILICON MMIC 1st FREQUENCY DOWN-CONVERTER FOR CELLULAR/CORDLESS TELEPHONE
Fabricant NEC 
Logo NEC 





1 Page

No Preview Available !





UPC8112TB-E3 fiche technique
DATA SHEET
BIPOLAR ANALOG INTEGRATED CIRCUIT
µPC8112TB
SILICON MMIC 1st FREQUENCY DOWN-CONVERTER
FOR CELLULAR/CORDLESS TELEPHONE
DESCRIPTION
The µPC8112TB is a silicon monolithic integrated circuit designed as 1st frequency down-converter for
cellular/cordless telephone receiver stage. This IC consists of mixer and local amplifier. The µPC8112TB features
high impedance output of open collector. Similar ICs of the µPC2757TB and µPC2758TB feature low impedance
output of emitter follower. These TB suffix ICs which are smaller package than conventional T suffix ICs contribute to
reduce your system size.
The µPC8112TB is manufactured using NEC’s 20 GHz fT NESAT™III silicon bipolar process. This process uses
silicon nitride passivation film and gold electrodes. These materials can protect chip surface from external pollution
and prevent corrosion/migration. Thus, this IC has excellent performance, uniformity and reliability.
FEATURES
• Excellent RF performance : IIP3 = –7 dBm@fRFin = 1.9 GHz (reference)
IM3 = –88 dBc@PRFin = –38 dBm, 1.9 GHz (reference)
• Similar conversion gain to µPC2757 and lower noise figure than µPC2758
• Minimized carrier leakage : RFIo = –80 dB@fRFin = 900 MHz (reference)
RFIo = –55 dB@fRFin = 1.9 GHz (reference)
• High linearity
: PO (sat) = –2.5 dBm TYP.@fRFin = 900 MHz
PO (sat) = –3 dBm TYP.@fRFin = 1.9 GHz
• Low current consumption
: ICC = 8.5 mA TYP.
• Supply voltage
: VCC = 2.7 to 3.3 V
• High-density surface mounting : 6-pin super minimold package
APPLICATIONS
• 1.5 GHz to 1.9 GHz cellular/cordless telephone (PHS, DECT, PDC1.5G and so on)
• 800 MHz to 900 MHz cellular telephone (PDC800M and so on)
ORDER INFORMATION
Part Number
µPC8112TB-E3
Package
6-pin super minimold
Markings
C2K
Supplying Form
Embossed tape 8 mm wide.
Pin 1, 2, 3 face the tape perforation side.
Qty 3kpcs/reel.
Remark To order evaluation samples, please contact your local NEC sales office.
(Part number for sample order: µPC8112TB)
Caution Electro-static sensitive devices
The information in this document is subject to change without notice. Before using this document, please
confirm that this is the latest version.
Not all devices/types available in every country. Please check with local NEC representative for
availability and additional information.
Document No. P12808EJ2V0DS00 (2nd edition)
Date Published June 2000 N CP(K)
Printed in Japan
The mark shows major revised points.
©
1997, 2000

PagesPages 20
Télécharger [ UPC8112TB-E3 ]


Fiche technique recommandé

No Description détaillée Fabricant
UPC8112TB-E3 SILICON MMIC 1st FREQUENCY DOWN-CONVERTER FOR CELLULAR/CORDLESS TELEPHONE NEC
NEC

US18650VTC5A

Lithium-Ion Battery

Sony
Sony
TSPC106

PCI Bus Bridge Memory Controller

ATMEL
ATMEL
TP9380

NPN SILICON RF POWER TRANSISTOR

Advanced Semiconductor
Advanced Semiconductor


www.DataSheetWiki.com    |   2020   |   Contactez-nous  |   Recherche