DataSheetWiki


ULN2068LB fiches techniques PDF

Allegro MicroSystems - QUAD 1.5 A DARLINGTON SWITCHES

Numéro de référence ULN2068LB
Description QUAD 1.5 A DARLINGTON SWITCHES
Fabricant Allegro MicroSystems 
Logo Allegro MicroSystems 





1 Page

No Preview Available !





ULN2068LB fiche technique
2064 THRU
2069
QUAD 1.5 A DARLINGTON SWITCHES
ULN2064/65B
K1
C2
B3
GND 4
GND 5
B6
C7
K8
16 C
15 NC
14 B
13 GND
12 GND
11 B
10 NC
9C
Dwg. No. A-9765A
ABSOLUTE MAXIMUM RATINGS
at +25°C Free-Air Temperature
for Any One Driver
(unless otherwise noted)
Output Voltage, VCEX ................ See Guide
Output Sustaining Voltage,
VCE(SUS) ............................. See Guide
Output Current, IOUT (Note 1) .......... 1.75 A
Input Voltage, VIN ...................... See Guide
Input Current, IB (Note 2) .................. 25 mA
Supply Voltage,
VS (ULN2068B/LB & 2069B/LB) ... 10 V
Total Package Power Dissipation,
PD ....................................... See Graph
Operating Temperature Range,
TA ................................. -20°C to +85°C
Storage Temperature Range,
TS ................................ -55°C to -150°C
1. Allowable combinations of output current,
number of outputs conducting, and duty cycle
are shown on the following pages.
2. Input current may be limited by maximum
allowable input voltage.
High-voltage, high-current Darlington arrays ULN2064B/LB
through ULN2069B/LB are designed for interface between low-level
logic and a variety of peripheral loads such as relays, solenoids, dc and
stepper motors, magnetic print hammers, multiplexed LED and incan-
descent displays, heaters, and similar loads. Output off voltage ratings
of 50 V and 80 V are available. These quad drivers can drive resistive
loads to 480 watts (1.5 A x 80 V, 26% duty cycle). For inductive
loads, sustaining voltages of 35 V and 50 V at 100 mA are specified.
Quad drivers ULN2064B/LB, ULN2065B/LB, ULN2068B/LB,
and ULN2069B/LB are intended for use with TTL, low-speed TTL,
and 5 V MOS logic. The ULN2065B/LB and ULN2069B/LB are
selected for the 80 V minimum output breakdown specification. The
ULN2068B/LB and ULN2069B/LB have pre-driver stages and are
recommended for applications requiring high gain (low input-current
loading). Quad-driver arrays are supplied with heat-sink contact tabs
in 16-pin plastic DlPs (suffix ‘B’) and 20-lead surface-mountable wide-
body SOICs (suffix ‘LB’).
FEATURES
I TTL, DTL, MOS, CMOS Compatible Inputs
I Transient-Protected Outputs
I Loads to 480 Watts
I Heat-Sink Contact Tabs
I Automotive Capable
Always order by complete part number, e.g., ULN2064B .

PagesPages 12
Télécharger [ ULN2068LB ]


Fiche technique recommandé

No Description détaillée Fabricant
ULN2068LB QUAD 1.5 A DARLINGTON SWITCHES Allegro MicroSystems
Allegro MicroSystems

US18650VTC5A

Lithium-Ion Battery

Sony
Sony
TSPC106

PCI Bus Bridge Memory Controller

ATMEL
ATMEL
TP9380

NPN SILICON RF POWER TRANSISTOR

Advanced Semiconductor
Advanced Semiconductor


www.DataSheetWiki.com    |   2020   |   Contactez-nous  |   Recherche