DataSheetWiki


PBL386202 fiches techniques PDF

Ericsson - Subscriber Line Interface Circuit

Numéro de référence PBL386202
Description Subscriber Line Interface Circuit
Fabricant Ericsson 
Logo Ericsson 





1 Page

No Preview Available !





PBL386202 fiche technique
June 1999
PBL 386 20/2
Subscriber Line
Interface Circuit
Description
The PBL 386 20/2 Subscriber Line Interface Circuit (SLIC) is a 90 V bipolar integrated
circuit for use in PBX,Terminal adapters and other telecommunications equipment.
The PBL 386 20/2 has been optimized for low total line interface cost and a high
degree of flexibility in different applications.
The PBL 386 20/2 has constant current feed, programmable to max. 30 mA.
A second lower battery voltage may be connected to the device to reduce short
loop power dissipation. The SLIC automatically switches between the two battery
supply voltages without need for external components or external control.
The SLIC incorporates loop current, ground key and ring trip detection functions.
The PBL 386 20/2 is compatible with loop start signaling.
Two- to four-wire and four- to two-wire voice frequency (VF) signal conversion is
accomplished by the SLIC in conjunction with either a conventional CODEC/filter or
with a programmable CODEC/filter, e.g. SLAC, SiCoFi, Combo II. The programmable
two-wire impedance, complex or real, is set by a simple external network.
Longitudinal voltages are suppressed by a feedback loop in the SLIC and the
longitudinal balance specifications meet Bellcore TR909 requirements.
The PBL 386 20/2 package options are 24-pin SSOP, 24-pin SOIC and 28 pin PLCC.
Key Features
• 24-pin SSOP package
• High and low battery with automatic
switching
• 60 mW on-hook power dissipation in
active state
• On-hook transmission
• Long loop battery feed tracks Vbat for
maximum line voltage
• Only +5 V feed in addition to battery
• Selectable transmit gain (1x or 0.5x)
• No power-up sequence
• 44V open loop voltage @ -48V battery
feed
• Full longitudinal current capability
during on-hook state
• Analog over temperature protection
permits transmission while the
protection circuit is active
• Integrated Ring Relay driver
• Ground key detector
• Programmable signal headroom
DT
DR
TIPX
RINGX
HP
VCC
VBAT2
VBAT
AGND
BGND
Two-wire
Interface
Figure 1. Block diagram.
Ring Trip
Comparator
Ground Key
Detector
Line Feed
Controller
and
Longitudinal
Signal
Suppression
Off-hook
Detector
VF Signal
Transmission
PTG
Ring Relay
Driver
Input
Decoder
and
Control
RRLY
C1
C2
C3
DET
POV
PSG
PLC
LP
PLD
REF
VTX
RSN
PBL 386 20/2
24-pinSOIC, 24-pin SSOP, 28-pin PLCC
1

PagesPages 16
Télécharger [ PBL386202 ]


Fiche technique recommandé

No Description détaillée Fabricant
PBL38620-2 Subscriber Line Interface Circuit Ericsson
Ericsson
PBL386202 Subscriber Line Interface Circuit Ericsson
Ericsson
PBL386202QNS Subscriber Line Interface Circuit Ericsson
Ericsson
PBL386202QNT Subscriber Line Interface Circuit Ericsson
Ericsson

US18650VTC5A

Lithium-Ion Battery

Sony
Sony
TSPC106

PCI Bus Bridge Memory Controller

ATMEL
ATMEL
TP9380

NPN SILICON RF POWER TRANSISTOR

Advanced Semiconductor
Advanced Semiconductor


www.DataSheetWiki.com    |   2020   |   Contactez-nous  |   Recherche