DataSheetWiki


REG113 fiches techniques PDF

Burr-Brown Corporation - DMOS 400mA Low-Dropout Regulator

Numéro de référence REG113
Description DMOS 400mA Low-Dropout Regulator
Fabricant Burr-Brown Corporation 
Logo Burr-Brown Corporation 





1 Page

No Preview Available !





REG113 fiche technique
REG113
SBVS031C – MARCH 2001 – REVISED MARCH 2003
DMOS
400mA Low-Dropout Regulator
FEATURES
q CAP-FREE DMOS TOPOLOGY:
Ultra Low Dropout Voltage:
250mV typ at 400mA
Output Capacitor not Required for Stability
q UP TO 500mA PEAK, TYPICAL
q FAST TRANSIENT RESPONSE
q VERY LOW NOISE: 28µVrms
q HIGH ACCURACY: ±1.5% max
q HIGH EFFICIENCY:
IGND = 850µA at IOUT = 400mA
Not Enabled: IGND = 0.01µA
q 2.5V, 2.85V, 3.0V, 3.3V, AND 5.0V OUTPUT VERSIONS
q OTHER OUTPUT VOLTAGES AVAILABLE UPON
REQUEST
q FOLDBACK CURRENT LIMIT
q THERMAL PROTECTION
q SMALL SURFACE-MOUNT PACKAGES:
SOT23-5 and MSOP-8
APPLICATIONS
q PORTABLE COMMUNICATION DEVICES
q BATTERY-POWERED EQUIPMENT
q PERSONAL DIGITAL ASSISTANTS
q MODEMS
q BAR-CODE SCANNERS
q BACKUP POWER SUPPLIES
DESCRIPTION
The REG113 is a family of low-noise, low-dropout linear
regulators with low ground pin current. Its new DMOS topol-
ogy provides significant improvement over previous designs,
including low-dropout voltage (only 250mV typ at full load),
and better transient performance. In addition, no output
capacitor is required for stability, unlike conventional low-
dropout regulators that are difficult to compensate and re-
quire expensive low ESR capacitors greater than 1µF.
Typical ground pin current is only 850µA (at IOUT = 400mA)
and drops to 10nA when not enabled. Unlike regulators with
PNP pass devices, quiescent current remains relatively con-
stant over load variations and under dropout conditions.
The REG113 has very low output noise (typically 28µVrms
for VOUT = 3.3V with CNR = 0.01µF), making it ideal for use
in portable communications equipment. Accuracy is main-
tained over temperature, line, and load variations. Key
parameters are tested over the specified temperature range
(–40°C to +85°C).
The REG113 is well protected—internal circuitry provides a
current limit which protects the load from damage, further-
more, thermal protection circuitry keeps the chip from being
damaged by excessive temperature. The REG113 is avail-
able in SOT23-5 and MSOP-8 packages.
Enable
VIN
+
0.1µF
REG113
VOUT
+ COUT(1)
NR(2)
GND
NOTES: (1) Optional. (2) NR = Noise Reduction.
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of Texas Instruments
standard warranty. Production processing does not necessarily include
testing of all parameters.
www.ti.com
Copyright © 2001-2003, Texas Instruments Incorporated

PagesPages 15
Télécharger [ REG113 ]


Fiche technique recommandé

No Description détaillée Fabricant
REG1117 REG1117: 800mA 1A Low Dropout Pos Regulator 1.8 2.5 2.85 3.3 5V Adjustable (Rev. D) Texas Instruments
Texas Instruments
REG1117 800mA and 1A Low Dropout Positive Regulator Burr-Brown Corporation
Burr-Brown Corporation
REG1117A REG1117: 800mA 1A Low Dropout Pos Regulator 1.8 2.5 2.85 3.3 5V Adjustable (Rev. D) Texas Instruments
Texas Instruments
REG1117A 800mA and 1A Low Dropout Positive Regulator Burr-Brown Corporation
Burr-Brown Corporation

US18650VTC5A

Lithium-Ion Battery

Sony
Sony
TSPC106

PCI Bus Bridge Memory Controller

ATMEL
ATMEL
TP9380

NPN SILICON RF POWER TRANSISTOR

Advanced Semiconductor
Advanced Semiconductor


www.DataSheetWiki.com    |   2020   |   Contactez-nous  |   Recherche