|
|
Número de pieza | RGR2622 | |
Descripción | Fiber Optic Light to Logic Receiver with Clock Recovery | |
Fabricantes | Agilent(Hewlett-Packard) | |
Logotipo | ||
Hay una vista previa y un enlace de descarga de RGR2622 (archivo pdf) en la parte inferior de esta página. Total 6 Páginas | ||
No Preview Available ! Fiber Optic “Light to Logic”
Receiver with Clock Recovery
Preliminary Technical Data
RGR2622
Features
• Light to Logic 20-Pin DIP
Receiver Offers ECL
Compatibility
• Sensitivity:
–31 dBm
• Phase-Locked Loop (PLL)
Timing Recovery Circuit
• Meets All SONET Jitter
Requirements
(CCITT G.958)
• Single +5 V Supply,
Typically <1.00 W
• SONET/SDH Compliant
Applications
• Telecommunication
Networks
• SONET OC12 and SDH
STM4 Compatible
• Local and Metropolitan Area
Networks
• ATM Single Mode Public
Network
• Military Communications
and Control Systems
• Digital Cable TV Networks
Description
The RGR2622 receiver provides
optical signal conversion and
processing. It converts 1200 nm
to 1600 nm wavelength lightwave
information into an electrical
signal at data rates of 622 Mb/s.
Each receiver contains an InGaAs
PIN photodiode, a high sensitiv-
ity, wide dynamic range transim-
pedance amplifier, capacitively
coupled to a PLL based clock
recovery circuit. The clock and
data outputs are retimed
complementary PECL.
A complementary CMOS
compatible low light alarm is also
provided.
Preliminary Product Disclaimer
This preliminary data sheet is provided to assist you in the evaluation of engineering samples of the product which is under development.
Until Hewlett-Packard releases this product for general sales, HP reserves the right to alter prices, specifications, features, capabilities,
function, manufacturing release dates, and even general availability of the product at any time.
406 (5/97)
1 page Optical Parameters (–40°C to +85°C)
Parameter
Wavelength
Receiver Sensitivity
Maximum Input Power
Alarm ON
Hysteresis
Alarm Response Time
Reliability Target
Symbol
-
-
-
-
-
-
-
Minimum
1200
-
–4
–40
1
-
-
Typical
-
–33.5
-
-
-
-
-
Maximum
1600
–31
-
–30
6
600
2000
Units
nm
dBm
dBm
dBm
dB
µS
FIT
Note
-
1
-
-
-
-
-
Jitter Tolerance
Jitter Transfer
Jitter Generation
ITU G.958 Compliant
ITU G.958 Compliant
ITU G.958 Compliant
Note:
1. At a BER of 1 x 10-10, 223-1 PRBS pattern NRZ data at the line rate with 10:1 extinction ratio. EOL.
Fiber Parameters
Fiber Pigtail
Core Diameter
Cladding Diameter
Secondary Coating Diameter
Typical
50
125
900
Units
microns
microns
microns
410
5 Page |
Páginas | Total 6 Páginas | |
PDF Descargar | [ Datasheet RGR2622.PDF ] |
Número de pieza | Descripción | Fabricantes |
RGR2622 | Fiber Optic Light to Logic Receiver with Clock Recovery | Agilent(Hewlett-Packard) |
RGR2622-DN | Fiber Optic Light to Logic Receiver with Clock Recovery | Agilent(Hewlett-Packard) |
RGR2622-FP | Fiber Optic Light to Logic Receiver with Clock Recovery | Agilent(Hewlett-Packard) |
RGR2622-SC | Fiber Optic Light to Logic Receiver with Clock Recovery | Agilent(Hewlett-Packard) |
Número de pieza | Descripción | Fabricantes |
SLA6805M | High Voltage 3 phase Motor Driver IC. |
Sanken |
SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
Analog Devices |
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |